In accordance with Article 13 of the Agreement on Uniform Principles and Rules of Technical Regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation of 18 November 2010, the Customs Union Commission (hereinafter referred to as the Commission) has decided:
1. To adopt the Technical Regulation of the Customs Union "On the Safety of Low-Voltage Equipment" (TR CU 004/2011) (attached).
2. To approve:
2.1. The list of standards whose application on a voluntary basis ensures compliance with the requirements of the Technical Regulation of the Customs Union "On the Safety of Low-Voltage Equipment" (TR CU 004/2011) (attached);
2.2. The list of standards containing rules and methods of research (testing) and measurement, including sampling rules, required for the application and implementation of the requirements of the Technical Regulation of the Customs Union "On the Safety of Low-Voltage Equipment" (TR CU 004/2011) and for the conformity assessment of objects of technical regulation (attached).
Footnote. Clause 2.2 as amended by Decision of the Board of the Eurasian Economic Commission No. 120 of 25.10.2016 (enters into force upon the expiry of 30 calendar days from the date of its official publication)3. To establish that:
3.1. the Technical Regulation of the Customs Union "On the Safety of Low-Voltage Equipment" (hereinafter referred to as the Technical Regulation) enters into force on 15 February 2013;
3.2. documents on the assessment (confirmation) of conformity with the mandatory requirements established by the legislation of the Member States of the Customs Union or by the regulatory legal acts of the Customs Union, issued or adopted in respect of products that are the object of technical regulation of the Technical Regulation (hereinafter referred to as products) before the date of entry into force of the Technical Regulation, shall remain valid until the expiry of their validity period, but no later than 15 March 2015, except for such documents issued or adopted before the date of official publication of this Decision, which shall remain valid until the expiry of their validity period.
From the date of entry into force of the Technical Regulation, the issuance or adoption of documents on the assessment (confirmation) of conformity of products with the mandatory requirements previously established by the legislation of the Member States of the Customs Union or by the regulatory legal acts of the Customs Union shall not be permitted;
3.3. until 15 March 2015, the manufacture and placing on the market of products in accordance with the mandatory requirements previously established by the legislation of the Member States of the Customs Union or by the regulatory legal acts of the Customs Union shall be permitted, provided that documents on the assessment (confirmation) of conformity of the products with the said mandatory requirements, issued or adopted before the date of entry into force of the Technical Regulation, are available.
Such products shall be marked with the national mark of conformity (market circulation mark) in accordance with the legislation of the Member States of the Customs Union or with Commission Decision No. 386 of 20 September 2010.
Marking such products with the single mark of product circulation on the market of the Member States of the Customs Union shall not be permitted.
3.31. Until 15 November 2013, the manufacture and placing on the market within the customs territory of the Customs Union of products that, before the date of entry into force of the Technical Regulation, were not subject to mandatory assessment (confirmation) of conformity with the mandatory requirements established by the regulatory legal acts of the Customs Union or by the legislation of a Member State of the Customs Union shall be permitted without documents on mandatory assessment (confirmation) of conformity and without marking with the national mark of conformity (market circulation mark).
3.4. the circulation of products placed on the market during the validity period of the documents on the assessment (confirmation) of conformity referred to in subclause 3.2 of this Decision, as well as of the products referred to in subclause 3.31 of this Decision, shall be permitted during the service life of the products established in accordance with the legislation of the Member States of the Customs Union.
Footnote. Clause 3 as amended by Decision of the Customs Union Commission No. 884 of 09.12.2011 (enters into force on the date of its official publication); by Decision of the Board of the Eurasian Economic Commission No. 247 of 04.12.2012 (enters into force upon the expiry of 30 calendar days from the date of its official publication).4. The Secretariat of the Commission, jointly with the Parties, shall prepare a draft Action Plan necessary for the implementation of the Technical Regulation and, within three months from the date of entry into force of this Decision, ensure its submission to the Commission for approval in the prescribed manner.
5. The Belarusian Party, with the participation of the Parties, shall, on the basis of monitoring the results of the application of standards, ensure the preparation of proposals for updating the Lists of standards referred to in clause 2 of this Decision and their submission to the Secretariat of the Commission at least once a year from the date of entry into force of the Technical Regulation for approval in the prescribed manner.
6. The Parties shall:
6.1. before the date of entry into force of the Technical Regulation, designate the state control (supervision) bodies responsible
for exercising state control (supervision) over compliance with the requirements of the Technical Regulation, and inform the Commission thereof;
6.2. from the date of entry into force of the Technical Regulation, ensure state control (supervision) over compliance with the requirements of the Technical Regulation, taking into account subclauses 3.2 – 3.4 of this Decision.
Footnote. The Decision was supplemented with clause 6 in accordance with Decision of the Customs Union Commission No. 884 of 09.12.2011 (enters into force on the date of its official publication).Members of the Customs Union Commission:
For the Republic |
For the Republic |
For the Russian |
S. Rumas | U. Shukeyev | I. Shuvalov |
APPROVED
by Decision of the Commission
of the Customs Union
No. 768 of 16 August 2011
TECHNICAL REGULATION OF THE CUSTOMS UNION TR CU 004/2011 On the Safety of Low‑Voltage Equipment On safety of low‑voltage equipment
Footnote. Throughout the text, the words "this Technical Regulation of the Customs Union" in the corresponding grammatical case have been replaced by the words "this Technical Regulation" in the corresponding grammatical case, the words "single customs territory of the Customs Union" in the corresponding grammatical case have been replaced by the words "customs territory of the Union" in the corresponding grammatical case, and the words "single mark of product circulation on the market of the Member States of the Customs Union" in the corresponding grammatical case have been replaced by the words "single mark of product circulation on the market of the Union" in the corresponding grammatical case by Decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).
Contents
Preface
Article 1. Scope of Application
Article 2. Definitions
Article 3. Rules of Circulation on the Market
Article 4. Safety Requirements
Article 5. Requirements for Marking and Operational Documents
Article 6. Ensuring Conformity with Safety Requirements
Article 7. Proof of Conformity
Article 8. Marking with the Single Mark of Product Circulation on the Market of the Union
Article 9. Safeguard Clause
Annex List of Low Voltage Equipment Subject to Proof of Conformity in the Form of Certification in the Member States of the Customs Union in Accordance with the Technical Regulation of the Customs Union "On the Safety of Low-Voltage Equipment"
(TR CU 0042011)
Foreword
1. This Technical Regulation has been developed in accordance with the Agreement on Common Principles and Rules of Technical Regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation of 18 November 2010.
2. This Technical Regulation has been developed for the purpose of establishing, in the customs territory of the Eurasian Economic Union (hereinafter – the Union), uniform requirements for low-voltage equipment that are mandatory for application and compliance, and of ensuring the free movement of low-voltage equipment placed on the market in the customs territory of the Union.
Footnote. Paragraph 2 as worded by Decision of the Council of the Eurasian Economic Commission dated 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).3. If other technical regulations of the Union (Customs Union) establishing requirements for low-voltage equipment have been adopted, such equipment shall comply with the requirements of all technical regulations of the Union (Customs Union) that apply to it.
Footnote. Paragraph 3 as worded by Decision of the Council of the Eurasian Economic Commission dated 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 1. Scope of Application
1. This Technical Regulation applies to low-voltage equipment placed on the market in the customs territory of the Union.
Low-voltage equipment covered by this Technical Regulation of the Customs Union includes electrical equipment intended for use at a rated voltage from 50 to 1000 V (inclusive) of alternating current and from 75 to 1500 V (inclusive) of direct current.
2. This Technical Regulation does not apply to:
a) low-voltage equipment:
of control devices for pasture fences;
specially intended for use on air, water, land and underground transport vehicles;
specially intended to ensure safety in the field of atomic energy use;
used (previously operated);
falling within the scope of, and subject to proof of conformity to the requirements of, the Customs Union technical regulations "On the Safety of Machinery and Equipment" (TR CU 010/2011), "Safety of Lifts" (TR CU 011/2011) and "On the Safety of Equipment for Work in Explosive Atmospheres" (TR CU 012/2011), except for cables, wires and cords;
manufactured by legal entities and by individuals registered as individual entrepreneurs, not intended for circulation in the customs territory of the Union, transfer free of charge, or provision for hire, lease or rent;
b) medical devices;
c) defence products intended to ensure defence and security interests, including those supplied under the state defence order;
d) component parts of low-voltage equipment (assemblies, constituent parts and components) supplied by the manufacturer of that low-voltage equipment on a contractual basis, provided that these component parts cannot be accessible to the consumer (user) other than as built into the low-voltage equipment for which they are intended;
e) component parts of low-voltage equipment (assemblies, constituent parts and components) whose safety is partly or wholly determined by the way these component parts are built into other electrical equipment and cannot be assessed (tested) other than as part of that equipment (for example, connectors, winding wires, printed circuit boards, microswitches, relays, integrated circuits, discrete semiconductor devices, capacitors, inductors, resistors, filters and other components for mounting on printed circuit boards or otherwise inside enclosures or protective casings).
Footnote. Paragraph 2 as worded by Decision of the Council of the Eurasian Economic Commission dated 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).3. This Technical Regulation establishes requirements for low-voltage equipment for the purposes of protecting human life and health and property, and of preventing actions that mislead consumers (users) regarding its purpose and safety.
Article 2. Definitions
The following terms and their definitions are used in this Technical Regulation of the Customs Union:
manufacturer – a legal entity or an individual acting as an individual entrepreneur that manufactures and (or) sells low-voltage equipment in its own name and is responsible for its compliance with the safety requirements of the Technical Regulation of the Customs Union;
importer – a legal entity or an individual acting as an individual entrepreneur, registered in the territory of a Member State in the manner established by the legislation of that Member State, that has concluded a foreign trade contract with a foreign manufacturer (seller) for the transfer of products, places these products on the market and (or) sells them in the customs territory of the Union, and bears liability for the compliance of the products with the requirements of technical regulations;
low-voltage equipment – electrical equipment whose rated voltage at all inputs and outputs (excluding the spark-discharge impulse voltage) does not exceed 1000 V of alternating current and 1500 V of direct current;
used (previously operated) low-voltage equipment – low-voltage equipment showing one or more signs of operation (contamination, external and internal dust accumulation, traces of exposure to extreme temperatures, liquids or sunlight, corrosion, patina, abrasions, scratches, dents and other damage, disrupted or altered pre-sale settings and software, repaired or replaced assemblies, parts and components, absence of seals, stoppers, plugs, protective coatings, enclosures, cases and other elements removed during operation), which has been used for its intended purpose by a consumer (user), as confirmed by documentary evidence;
rated voltage of electrical equipment – the input and (or) output voltage (voltage range) of electrical equipment specified by the manufacturer on that equipment and in its operational documents;
circulation of low-voltage equipment on the market – the processes of transfer of low-voltage equipment from the manufacturer to the consumer (user) within the customs territory of the Union that low-voltage equipment undergoes after its manufacture has been completed;
batch of low-voltage equipment – a set of units of low-voltage equipment of the same name and (or) designation, produced during a certain time interval under the same production conditions and accompanied by a single shipping document;
intended use – use of low-voltage equipment in accordance with the purpose specified by the manufacturer on this equipment and (or) in the operational documents;
person authorized by the manufacturer – a legal entity or natural person registered in the established procedure by a member state of the Customs Union, designated by the manufacturer on the basis of a contract with it to act on its behalf in proof of conformity and in placing products on the customs territory of the Union, and to bear liability for non-conformity of products with the requirements of the Technical Regulation of the Customs Union;
electrical equipment – equipment intended for the generation, conversion, transmission, distribution and use of electrical energy, including both for direct use and built into machines, mechanisms, apparatus, instruments and other products.
household electrical equipment – electrical equipment intended for use by a consumer (user) for purposes not related to manufacturing, trade or other commercial activity, whose operational documents do not contain a prohibition on household use.
Footnote. Article 2 as amended by Decision of the Council of the Eurasian Economic Commission No. 90 of 10.06.2022 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 3. Rules of Circulation on the Market
1. Low-voltage equipment shall be placed into circulation on the market if it conforms to this Technical Regulation of the Customs Union and to other Technical Regulations of the Union (Customs Union) that apply to it, and provided that it has undergone proof of conformity in accordance with Article 7 of this Technical Regulation of the Customs Union and in accordance with other Technical Regulations of the Union (Customs Union) that apply to it.
2. Low-voltage equipment whose conformity with the requirements of this Technical Regulation of the Customs Union has not been confirmed shall not be marked with the single mark of product circulation on the market of the Union and shall not be allowed to be placed into circulation on the market.
3. Low-voltage equipment not marked with the single mark of circulation on the market of the member states of the Customs Union shall not be allowed to be placed into circulation on the market.
Footnote. Article 3 as amended by Decision of the Council of the Eurasian Economic Commission No. 90 of 10.06.2022 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 4. Safety Requirements
Low-voltage equipment shall be designed and manufactured in such a way that, when it is used as intended and the requirements for installation, operation (use), storage, carriage (transportation) and maintenance are fulfilled, this equipment ensures:
the necessary level of protection against electric shock;
the absence of unacceptable risk of elevated temperatures, arc discharges or radiation that may give rise to hazards;
the necessary level of protection against injuries caused by moving and stationary parts of low-voltage equipment;
the necessary level of protection against hazards of non-electrical origin arising from the use of low-voltage equipment, including those caused by physical, chemical or biological factors;
the necessary level of insulation protection;
the necessary level of mechanical and switching wear resistance;
the necessary level of resistance to external influencing factors, including those of a non-mechanical nature, under the corresponding climatic environmental conditions;
the absence of unacceptable risk in the event of overloads, emergency modes and failures caused by the effect of external and internal influencing factors;
the absence of unacceptable risk during connection and (or) installation.
Low-voltage equipment shall be designed and manufactured in such a way that it does not become a source of fire under normal and emergency operating conditions.
The consumer (user) shall be provided with the necessary level of information for the safe intended use of low-voltage equipment.
Footnote. Article 4 as amended by Decision of the Council of the Eurasian Economic Commission No. 90 of 10.06.2022 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 5. Requirements for Marking and Operational Documents
1. The name and (or) designation of the low-voltage equipment, its main parameters and characteristics affecting safety, the name and (or) trademark of the manufacturer, and the name of the country where the low-voltage equipment was manufactured shall be applied to the low-voltage equipment.
In addition, the name of the manufacturer and (or) its trademark, and the name and designation of the low-voltage equipment shall also be applied to the packaging.
2. If the information specified in paragraph 1 of this Article cannot be applied to the low-voltage equipment, it may be given only in the operational documents accompanying this equipment. In this case, the name of the manufacturer and (or) its trademark, and the name and designation of the low-voltage equipment shall be applied to the packaging.
3. The marking of low-voltage equipment shall be legible, easily readable and applied to the low-voltage equipment in a place accessible for inspection without disassembly with the use of tools.
4. The operational documents for low-voltage equipment shall contain:
the information listed in paragraph 1 of this Article;
information on the purpose of the low-voltage equipment;
characteristics and parameters;
rules and conditions for safe operation (use);
rules and conditions for installation, storage, carriage (transportation), sale and disposal (if necessary);
information on the measures to be taken if a malfunction of this equipment is detected;
the name and location of the manufacturer (the person authorized by the manufacturer) and of the importer, and contact information for them;
the month and year of manufacture of the low-voltage equipment and (or) information on where the year of manufacture is marked and how it is to be determined.
5. Operational documents shall be drawn up in Russian and, where the legislation of a Member State of the Union so requires, in the state language (state languages) of the Member State of the Union in whose territory the products are sold. Letter trademarks, proper names, names of localities and other names and details in operational documents may be given in other languages. Units of measurement may be given using their international designations.
The information on household low-voltage equipment specified in paragraph 4 of this Article shall be provided on paper. A set of operational documents on electronic media may be supplied with household low-voltage equipment.
Operational documents included in the delivery set of non-household low-voltage equipment may be provided on electronic media only.
If the volume of information provided for in paragraph 4 of this Article so permits, operational documents need not be drawn up, and the information may instead be indicated on the equipment itself or on its packaging.
Footnote. Article 5 as amended by Decision of the Council of the Eurasian Economic Commission No. 90 dated 10.06.2022 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 6. Ensuring Conformity with Safety Requirements
1. Conformity of low-voltage equipment with this Technical Regulation of the Customs Union is ensured by fulfilling its safety requirements directly or by fulfilling the requirements of the standards included in the list of international and regional (interstate) standards, and in their absence, national (state) standards, the voluntary application of which ensures compliance with the requirements of this Technical Regulation.
2. Methods of research (testing) and measurement of low-voltage equipment are established in the standards included in the list of international and regional (interstate) standards, and in their absence, national (state) standards, containing rules and methods of research (testing) and measurement, including sampling rules, necessary for the application and fulfilment of the requirements of this Technical Regulation and for carrying out conformity assessment of objects of technical regulation.
Footnote. Article 6 as amended by Decision of the Council of the Eurasian Economic Commission No. 90 dated 10.06.2022 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 7. Proof of Conformity
1. Before being placed on the market, low-voltage equipment shall undergo proof of conformity with the safety requirements of this Technical Regulation of the Customs Union.
Proof of conformity of low-voltage equipment is carried out according to the schemes set out in the Regulation on the Procedure for Applying Standard Schemes of Conformity Assessment (Confirmation) in Technical Regulations of the Customs Union, approved by the Commission of the Customs Union (hereinafter, the Commission).
2. Low-voltage equipment included in the List given in the annex to this Technical Regulation of the Customs Union is subject to proof of conformity in the form of certification (schemes 1с, 3с, 4с).
Low-voltage equipment not included in the said List is subject to proof of conformity in the form of declaration of conformity (schemes 1д, 2д, 3д, 4д, 6д). The scheme of declaration of conformity for low-voltage equipment not included in the List is chosen by the manufacturer (the person authorized by the manufacturer) or the importer.
By decision of the manufacturer (the person authorized by the manufacturer) or the importer, proof of conformity of low-voltage equipment not included in the List may be carried out in the form of certification in accordance with paragraph 5 of this Article.
Where the standards referred to in paragraph 1 of Article 6 of this Technical Regulation of the Customs Union are not applied, or in their absence, proof of conformity of low-voltage equipment is carried out in the form of certification (schemes 1с, 3с, 4с) in accordance with paragraph 10 of this Article.
3. Certification of serially produced low-voltage equipment is carried out according to scheme 1с. Low-voltage equipment is submitted for certification by the manufacturer (the person authorized by the manufacturer).
Certification of a batch of low-voltage equipment is carried out according to scheme 3с, and of a single item according to scheme 4с. A batch of low-voltage equipment (a single item) manufactured in the customs territory of the Union is submitted by the manufacturer; a batch of low-voltage equipment (a single item) imported into the customs territory of the Union is submitted by the importer or the manufacturer (the person authorized by the manufacturer).
4. Certification of low-voltage equipment is carried out by an accredited certification body (conformity assessment (confirmation) body) included in the unified register of conformity assessment bodies of the Union.
Testing for the purposes of certification is carried out by an accredited testing laboratory (centre) included in the unified register of conformity assessment bodies of the Union.
5. When carrying out certification of low-voltage equipment (schemes 1с, 3с, 4с):
5.1. the manufacturer (the person authorized by the manufacturer) or the importer submits to the certification body (conformity assessment (confirmation) body) a set of documents for the low-voltage equipment confirming conformity of the low-voltage equipment with the safety requirements of this Technical Regulation of the Customs Union, which includes:
technical specifications (if any);
operational documents;
a list of standards with whose requirements the given low-voltage equipment must comply, from the List of standards referred to in paragraph 1 of Article 6 of this Technical Regulation of the Customs Union;
a contract (supply agreement) or shipping documentation (for a batch of low-voltage equipment (a single item) (schemes 3с, 4с);
5.2. The manufacturer shall take all necessary measures to ensure that the production process is stable and ensures conformity of the manufactured low-voltage equipment with the requirements of this Technical Regulation of the Customs Union;
5.3. the certification (conformity assessment (confirmation)) body:
5.3.1. selects the sample (samples);
5.3.2. identifies the low-voltage equipment by establishing that its characteristics are identical to the features established in Article 1 of this Technical Regulation of the Customs Union, the provisions established by Article 5 of this Technical Regulation of the Customs Union, and the documents listed in subparagraph 5.1 of paragraph 5 of this Article;
5.3.3. arranges testing of the sample (samples) of low-voltage equipment for conformity with the requirements of the standards from the List of Standards referred to in paragraph 1 of Article 6 of this Technical Regulation of the Customs Union, and analyses the test report (reports);
5.3.4. analyses the state of production (scheme 1с).
Where the manufacturer has a certified quality management system for production or for design and production of low-voltage equipment, assesses the ability of that system to ensure the stable output of the low-voltage equipment being certified that conforms to the requirements of this Technical Regulation of the Customs Union;
5.3.5. issues a certificate of conformity in the uniform form approved by the Commission. The validity period of the EAC Certificate for serially produced low-voltage equipment is not more than 5 years; for a batch of low-voltage equipment (a single item), the validity period of the EAC Certificate is not established;
5.4. the manufacturer (person authorized by the manufacturer), importer:
5.4.1. affixes the single mark of circulation of products on the market of the Union;
5.4.2. after completion of proof of conformity, compiles a set of documents for the low-voltage equipment, which includes:
the documents provided for in subparagraph 5.1 of paragraph 5 of this Article;
test report (reports);
results of the analysis of the state of production;
certificate of conformity.
5.5. the certification (conformity assessment (confirmation)) body carries out inspection control over the certified low-voltage equipment by testing samples in an accredited testing laboratory (centre) and (or) analysing the state of production (scheme 1с).
6. Declaration of conformity of low-voltage equipment (schemes 1д, 2д, 3д, 4д, 6д) is carried out on the basis of:
6.1. own evidence (schemes 1д, 2д):
- testing of low-voltage equipment (for a batch of low-voltage equipment (single item) (scheme 2д);
- testing of low-voltage equipment and production control by the manufacturer (for serially produced low-voltage equipment) (scheme 1д);
6.2. evidence obtained with the participation of an accredited testing laboratory (centre), a certification body for quality management systems, included in the unified register of conformity assessment bodies of the Union (schemes 3д, 4д, 6д):
- testing of low-voltage equipment, certification of the quality management system for production or for design and production of low-voltage equipment, and production control by the manufacturer (for serially produced low-voltage equipment) (scheme 6д).
- testing of low-voltage equipment (for a batch of low-voltage equipment (single item) (scheme 4д);
- testing of low-voltage equipment and production control by the manufacturer (for serially produced low-voltage equipment) (scheme 3д);
6.3. Declaration of conformity of serially produced low-voltage equipment is carried out by the manufacturer (person authorized by the manufacturer) under schemes 1д, 3д, 6д.
Declaration of conformity of a batch of low-voltage equipment (single item) is carried out by the manufacturer (person authorized by the manufacturer), importer under schemes 2д, 4д.
7. When declaring conformity of low-voltage equipment under schemes 1д, 2д:
7.1. the manufacturer (person authorized by the manufacturer), importer:
7.1.1. compiles a set of documents confirming conformity of the low-voltage equipment with the requirements of this Technical Regulation of the Customs Union, which includes:
technical specifications (if any);
operational documents;
a list of standards whose requirements this low-voltage equipment complies with, from the List of standards referred to in clause 1 of Article 6 of this Technical Regulation of the Customs Union;
test report (reports) of tests carried out in a testing laboratory (centre) chosen by the manufacturer (person authorized by the manufacturer), importer;
certificate of conformity (if any);
the manufacturer's declaration of conformity (if any) (for a batch of low-voltage equipment (single item) (scheme 2д);
contract (supply agreement) or shipping documentation (for a batch of low-voltage equipment (single item) (scheme 2д);
7.1.2. identifies the low-voltage equipment by establishing the identity of its characteristics with the features set out in Article 1 of this Technical Regulation of the Customs Union, the provisions set out in Article 5 of this Technical Regulation of the Customs Union, and the documents listed in subclause 7.1.1. of clause 7.1 of this Article;
7.2. the manufacturer:
carries out production control and takes all necessary measures to ensure that the production process ensures conformity of the low-voltage equipment with the requirements of this Technical Regulation of the Customs Union (scheme 1д).
The requirements for the production and control processes, as well as the results of their control, shall be documented (in the form established by the manufacturer);
7.3. the manufacturer (person authorized by the manufacturer), importer:
7.3.1. adopts a declaration, drawn up in writing, of conformity of the low-voltage equipment with this Technical Regulation of the Customs Union in the uniform form approved by the Commission, and affixes the single mark of product circulation on the market of the Union;
7.3.2. after completion of Proof of Conformity, includes the declaration of conformity in the set of documents for the low-voltage equipment specified in subclause 7.1.1. of clause 7.1 of this Article.
8. When declaring conformity of low-voltage equipment under schemes 3д, 4д, 6д:
8.1. the manufacturer (person authorized by the manufacturer), importer:
8.1.1. compiles a set of documents for the low-voltage equipment, which includes:
technical specifications (if any);
operational documents;
a list of standards whose requirements this low-voltage equipment must comply with from the List of standards referred to in clause 1 of Article 6 of this Technical Regulation of the Customs Union;
contract (supply agreement) or shipping documentation (for a batch of low-voltage equipment (single item) (schemes 3d, 4d);
certificate of conformity (copy of the certificate) for the quality management system of production or of design and production of low-voltage equipment (scheme 6д);
8.1.2. identifies the low-voltage equipment by establishing the identity of its characteristics with the features set out in Article 1 of this Technical Regulation of the Customs Union, the provisions set out in Article 5 of this Technical Regulation of the Customs Union, and the documents listed in subclause 8.1.1. of clause 8.1. of this Article;
8.1.3. arranges testing of the sample (samples) of low-voltage equipment for conformity with the requirements of the standards from the List of standards referred to in clause 1 of Article 6 of this Technical Regulation of the Customs Union;
8.2. the manufacturer:
carries out production control and takes all necessary measures to ensure that the production process ensures conformity of the low-voltage equipment with the requirements of this Technical Regulation of the Customs Union (schemes 3д, 6д). The requirements for the production and control processes, as well as the results of their control, shall be documented (in the form established by the manufacturer);
takes all necessary measures to ensure that the production process and the stable functioning of the quality management system of production or of design and production of low-voltage equipment ensure conformity of the low-voltage equipment with the requirements of this Technical Regulation of the Customs Union (scheme 6д);
8.3. the manufacturer (person authorized by the manufacturer), importer:
8.3.1. adopts a declaration, drawn up in writing, of conformity of the low-voltage equipment with this Technical Regulation of the Customs Union in the uniform form approved by the Commission, and affixes the single mark of product circulation on the market of the Union;
8.3.2. after completion of the Proof of Conformity procedures, compiles a set of documents for the low-voltage equipment, in which it includes:
the documents provided for in subclause 8.1.1 of clause 8.1 of this Article;
test report (reports);
the declaration of conformity.
9. The declaration of conformity is subject to registration in accordance with the acts constituting Union law. The declaration takes effect from the date of its registration.
The validity period of the declaration of conformity for serially produced low-voltage equipment is not more than 5 years; for a batch of low-voltage equipment (single item), no validity period of the declaration of conformity is established.
10. When certifying low-voltage equipment where the standards from the List of standards referred to in clause 1 of Article 6 of this Technical Regulation of the Customs Union are not applied, or in their absence (schemes 1с, 3с, 4с):
10.1. the manufacturer (person authorized by the manufacturer), importer submits to the certification body (body for Conformity Assessment (Proof of Conformity)) a set of documents for the low-voltage equipment confirming conformity of the low-voltage equipment with the safety requirements of this Technical Regulation of the Customs Union, which includes:
technical specifications (if any);
operational documents;
a description of the technical solutions adopted and a risk assessment confirming fulfilment of the safety requirements of this Technical Regulation of the Customs Union;
contract (supply agreement) or shipping documentation (for a batch of low-voltage equipment (single item) (schemes 3с, 4с);
10.2. The manufacturer takes all necessary measures to ensure that the production process is stable and ensures conformity of the manufactured low-voltage equipment with the requirements of this Technical Regulation of the Customs Union;
10.3. the certification body (body for Conformity Assessment (Proof of Conformity)):
10.3.1. selects the sample (samples);
10.3.2. carries out identification of the low-voltage equipment by establishing the identity of its characteristics with the features established in Article 1 of this Technical Regulation of the Customs Union, the provisions established by Article 5 of this Technical Regulation of the Customs Union, and the documents listed in subparagraph 10.1 of paragraph 10 of this Article;
10.3.3. carries out Proof of Conformity of the low-voltage equipment directly with the safety requirements of this Technical Regulation of the Customs Union.
In doing so, the certification body (body for Conformity Assessment (Proof of Conformity)):
determines, on the basis of the safety requirements of this Technical Regulation of the Customs Union, specific safety requirements for the low-voltage equipment being certified;
analyses the technical solutions adopted and the risk assessment carried out by the manufacturer, which confirm fulfilment of the safety requirements of this Technical Regulation of the Customs Union;
determines, from the List of standards referred to in paragraph 2 of Article 6 of this Technical Regulation of the Customs Union, the standards establishing measurement and test methods or, in their absence, determines the control, measurement and test procedures for Proof of Conformity of the low-voltage equipment with the specific safety requirements;
organises testing of the low-voltage equipment and analyses the test report (reports);
10.3.4. analyses the state of production (scheme 1с);
Where the manufacturer has a certified production management system or for design and production of low-voltage equipment, assesses the capability of this system to ensure stable output of the low-voltage equipment being certified that complies with the requirements of this Technical Regulation of the Customs Union;
10.3.5. issues a certificate of conformity in the uniform form approved by the Commission.
The validity period of the EAC Certificate for serially produced low-voltage equipment is not more than 5 years; for a batch of low-voltage equipment (single item), the validity period of the EAC Certificate is not established;
10.4. the manufacturer (person authorised by the manufacturer), importer:
10.4.1. affixes the single mark of product circulation on the market of the Union;
10.4.2. after completion of Proof of Conformity, compiles a set of documents for the low-voltage equipment, which includes:
the documents provided for in subparagraph 10.1 of this paragraph;
test report (reports);
results of the analysis of the state of production;
certificate of conformity;
10.5. the certification body (body for Conformity Assessment (Proof of Conformity)) carries out inspection control of the certified low-voltage equipment by testing samples in an accredited testing laboratory (centre) and (or) analysing the state of production (scheme 1с).
11. The set of documents for low-voltage equipment shall be kept in the territory of a Member State of the Union for:
low-voltage equipment – by the manufacturer (person authorised by the manufacturer) for not less than 10 years from the date of removal (discontinuation) of this low-voltage equipment from production;
a batch of low-voltage equipment – by the importer or the person authorised by the manufacturer for not less than 10 years from the date of sale of the last item of the batch.
Footnote. Article 7 as amended by decisions of the Customs Union Commission of 09.12.2011 No. 884 (enters into force on the date of its official publication); of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 8. Marking with the single mark of product circulation on the market of the Union
1. Low-voltage equipment that complies with the safety requirements of this Technical Regulation of the Customs Union and has undergone Proof of Conformity in accordance with Article 7 of this Technical Regulation of the Customs Union shall be marked with the single mark of product circulation on the market of the Union.
2. Marking with the single mark of product circulation on the market of the Union is carried out before the low-voltage equipment is placed on the market.
3. The single mark of circulation on the market of the Union is applied to each unit of low-voltage equipment by any method ensuring a clear and distinct image throughout the entire service life of the low-voltage equipment, and is also given in the operational documents accompanying it.
4. It is permitted to apply the single mark of product circulation on the market of the Union only to the packaging and in the operational documents accompanying it, if it cannot be applied directly to the low-voltage equipment.
5. Low-voltage equipment is marked with the single mark of product circulation on the market of the Union when it complies with the requirements of all technical regulations of the Union (Customs Union) that apply to it and that provide for the application of this mark.
Footnote. Article 8 as amended by the decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).Article 9. Safeguard clause
Footnote. Article 9 ceased to be in force by the decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).
Annex
to the Technical Regulation
of the Customs Union
"On the Safety of Low‑Voltage
Equipment"
(TR CU 004/2011)
Footnote. Annex as amended by the decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).
LIST
of Low Voltage Equipment subject to proof of conformity in the form of certification in accordance with the Technical Regulation of the Customs Union "On the Safety of Low‑Voltage Equipment" (TR CU 004/2011)
1. Household electrical apparatus and appliances:
for preparing and storing food and for mechanising kitchen work;
for treating (washing, ironing, drying, cleaning) linen, clothing and footwear;
for cleaning and tidying premises;
for maintaining and regulating the indoor microclimate;
sanitary and hygienic;
for hair, nail and skin care;
for warming the body;
vibration massage;
gaming, sports and exercise equipment;
audio and video equipment, television and radio broadcast receivers;
sewing and knitting;
power supply units, chargers, voltage stabilisers;
for gardening and horticulture;
for aquariums and garden ponds;
electric pumps;
lighting equipment and light sources;
wiring accessories;
extension cords.
automatic control devices for household electrical equipment;
control consoles and panels, controllers.
2. Personal electronic computers (personal computers):
personal electronic computers, including system units;
cash registers, including those operating together with a computer.
3. Low voltage equipment for household and office use connected to personal electronic computers:
scanners, printers and copiers (including multifunction devices);
monitors;
uninterruptible power supplies;
active loudspeaker systems;
multimedia projectors.
4. Electric heating tools.
5. Electric musical instruments.
6. Cables, wires and cords.
7. Circuit breakers, residual current devices, fuses, switchgear, switches, contactors, starters.
8. Deleted by Decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).9. Deleted by Decision of the Council of the Eurasian Economic Commission of 10.06.2022 No. 90 (enters into force upon expiry of 180 calendar days from the date of its official publication).
APPROVED
by Decision of the Customs Union Commission
of 16 August 2011 No. 768
LIST
of standards whose voluntary application ensures compliance with the requirements of the Technical Regulation of the Customs Union "On the Safety of Low‑Voltage Equipment" (TR CU 004/2011)
Footnote. The List as amended by Decision of the Board of the Eurasian Economic Commission of 25.10.2016 No. 120 (enters into force upon expiry of 30 calendar days from the date of its official publication).
No. | Elements of the Technical Regulation of the Customs Union | Standard designation | Standard title | Note |
1 | 2 | 3 | 4 | 5 |
1 | Article 4 | GOST 15047-78 | Household electric heating appliances. Terms and definitions | |
2 | GOST 16012-70 | Household electromechanical products. Terms and definitions | ||
3 | GOST 17791-82 | Cathode-ray devices. Terms and definitions | ||
4 | GOST 24127-80 | Continuous-operation gas-discharge lamps. Terms and definitions | ||
5 | GOST 27418-87 | Household radio-electronic equipment. Terms and definitions | ||
6 | Article 4 | GOST 12.1.004-91 | Occupational safety standards system. Fire safety. General requirements | |
7 | GOST R 12.1.009-2009 | Occupational safety standards system. Electrical safety. Terms and definitions | ||
8 | GOST R 12.1.019-2009 | Occupational safety standards system. Electrical safety. General requirements and nomenclature of types of protection | ||
9 | GOST 12.1.030-81 | Occupational safety standards system. Electrical safety. Protective earthing, connection to neutral | ||
10 | GOST 12.1.044-89 (ISO 4589-84) | Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination | ||
11 | GOST 12.2.007.0-75 | Occupational safety standards system. Electrotechnical products. General safety requirements | ||
12 | GOST 12.2.007.1-75 | Occupational safety standards system. Rotating electrical machines. Safety requirements | ||
13 | GOST 12.2.007.5-75 | Occupational safety standards system. Power capacitors. Capacitor installations. Safety requirements | ||
14 | GOST 12.2.007.6-93 | Occupational safety standards system. Electrical switching apparatus for voltages up to 1000 V. Safety requirements | ||
15 | GOST 12.2.007.8-75 | Occupational safety standards system. Electric welding and plasma processing devices. Safety requirements | ||
16 | GOST 12.2.007.10-87 | Occupational safety standards system. Induction installations, generators and heaters for electrothermics, ultrasonic installations and generators. Safety requirements | ||
17 | GOST 12.2.007.13-2000 | Occupational safety standards system. Electric lamps. Safety requirements | ||
18 | GOST 12.2.007.14-75 | Occupational safety standards system. Cables and cable fittings. Safety requirements | ||
19 | Article 4 | GOST 21128-83 | Power supply systems, networks, sources, converters and receivers of electrical energy. Rated voltages up to 1000 V | |
20 | GOST 21130-75 | Electrotechnical products. Earthing clamps and earthing signs. Design and dimensions | ||
21 |
sections 1 – 3 | Household electric storage heating appliances. Safety requirements and test methods | ||
22 | sections 1 – 7 GOST 31210-2003 | Personal-use information display devices. General ergonomic requirements and safety requirements | ||
23 | sections 1, 2, 5 and 6 GOST 839-80 | Bare wires for overhead power lines. Specifications | ||
24 | sections 1, 2, 5 and 6 GOST 2190-77 | Sapper wires. Specifications | ||
25 | sections 1, 2, 5 and 6 GOST 6285-74 | Wires for industrial blasting operations. Specifications | ||
26 | sections 1 and 2 GOST 7006-72 | Protective coverings of cables. Design and types, technical requirements and test methods | ||
27 | sections 3, 4, 7 – 9 GOST 7399-97 | Wires and cords for rated voltage up to 450/750 V. Specifications | ||
28 | sections 1, 2, 5 and 6 GOST 17515-72 | Plastic-insulated hook-up wires. Specifications | ||
29 | sections 1, 2, 5 and 6 GOST 26445-85 | Insulated power wires. General specifications | ||
30 |
sections 3, 4 | Wires and cords with fittings. Specifications | ||
31 |
sections 4 – 6 | Self-supporting insulated and covered wires for overhead power lines. General specifications | ||
32 | Article 4 |
sections 4 – 6 | Wires and cables for electrical installations for rated voltage up to and including 450/750 V. General specifications | |
33 | Article 4 |
sections 1 – 5 | Stationary cross-connect wire with polyvinyl chloride compound insulation. Specifications | |
34 |
sections 1 – 5 | Flexible bare copper wires. Specifications | ||
35 |
sections 1 – 5 | Heating wires. Specifications | ||
36 |
sections 1 – 5 | Wires with polyethylene insulating and protective sheath for field communications. Specifications | ||
37 | ST RK 2641-2015 | Single-pair telephone distribution wires. Specifications | ||
38 | ST RK 2794-2015 | Self-supporting insulated and covered wires for overhead power lines. Specifications | ||
39 | Article 4 | sections 1, 2, 5 and 6 GOST 433-73 | Rubber-insulated power cables. Specifications | |
40 |
sections 1, 2 | Control cables with rubber and plastic insulation. Specifications | ||
41 |
sections 1, 2 | Multicore plastic-insulated hook-up cables. Specifications | ||
42 | sections 1, 2, 5 and 6 GOST 18410-73 | Power cables with impregnated paper insulation. Specifications | ||
43 |
sections 1, 2 | Cables for control systems. General specifications | ||
44 | sections 1, 2, 5 and 6 GOST 18404.1-73 | Cables for control systems with fluoroplastic insulation in a reinforced rubber sheath. Specifications | ||
45 | sections 1, 2, 5 and 6 GOST 18404.2-73 | Cables for control systems with polyethylene insulation in a rubber sheath. Specifications | ||
46 | sections 1, 2, 5 and 6 GOST 18404.3-73 | Cables for control systems with polyethylene insulation in a polyvinyl chloride compound sheath. Specifications | ||
47 | sections 1 – 6 GOST 18690-2012 | Cables, wires, cords and cable fittings. Marking, packaging, transportation and storage | ||
48 | sections 1 and 2 GOST 23286-78 | Cables, wires, cords. Standards for insulation and sheath thicknesses and voltage tests | ||
49 |
sections 1 – 3 | Power cables for non-fixed installation. General technical requirements | ||
50 | sections 1 and 2 GOST 24641-81 | Lead and aluminium cable sheaths. Specifications | ||
51 |
sections 1 – 3 | Control cables. General specifications | ||
52 | GOST 31565-2012 | Cable products. Fire safety requirements | ||
53 |
sections 1 – 5 | Telephone cables with polyethylene insulation in a plastic sheath. Specifications | ||
54 |
sections 1 – 5 | Armoured load-bearing geophysical cables. General specifications | ||
55 |
sections 1 – 5 | Flexible cables and cords for underground and open-pit mining. General specifications | ||
56 |
sections 1 – 5 | Cables for signalling and interlocking with polyethylene insulation in a plastic sheath. Specifications | ||
57 |
sections 1 – 6 | Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications | ||
58 |
sections 1 – 3 | Power cables with plastic insulation. Specifications | applies until 01.06.2017 | |
59 | ST RK 2203-2012 | Twisted-pair cables for structured cabling systems General technical requirements | ||
60 |
sections 1 – 5 | Flexible cables with polyvinyl chloride insulation and sheath. General specifications | ||
61 |
sections 1 – 5 | Low-pair-count telephone cables with plastic insulation in a plastic sheath. Specifications | ||
62 |
sections 1 – 5 | Stationary telephone cables. Specifications | ||
63 |
sections 1 – 5 | High-frequency local communication cables. Specifications | ||
64 | sections 1 – 5 | Combined cables for video surveillance systems. | ||
and 8 – 10 ST RK 2644-2015 | Specifications | |||
65 | sections 1 – 6 | Symmetrical communication cables for digital transmission systems. | ||
and 9 – 11 | General specifications | |||
66 | twelfth paragraph | STB ISO | Lasers and laser-related equipment. Laser | |
of Article 4, Article 5 | 11252-2005 | devices. Requirements for documentation | ||
67 | paragraphs | STB EN | Additional safety requirements for equipment | |
first, second, sixth and tenth of Article 4, Article 5 | 41003-2008 | to be connected to telecommunication networks | ||
68 | paragraphs | GOST EN | Safety of household and similar electrical appliances. | |
first – third, | 50087-2014 | Additional requirements for coolers of freshly drawn milk | ||
69 | paragraphs | GOST EN | Cable trunking systems for electrical installations. | |
first – third, | 50085-1-2008 | Part 1. General requirements | ||
70 | paragraphs | GOST EN | Cable trunking systems for electrical installations. | |
first – third, | 50085-2-3-2008 | Part 2-3. Additional requirements for wiring ducts installed in distribution cabinets | ||
71 | paragraphs first, | GOST EN | Low-voltage switchgear and controlgear. Protection | |
second and fourth of Article 4 | 50274-2012 | against electric shock. Protection against unintentional direct contact with hazardous live parts | ||
72 | paragraphs | GOST EN | Switches for household and similar fixed | |
first, third | 50428-2015 | electrical installations. Collateral standard. Switches and related equipment for use in electronic systems of residential and public buildings | ||
73 | paragraphs | GOST EN | Equipment for resistance and arc welding and allied | |
first and fifth of Article 4 | 50445-2013 | processes. Conformity assessment against the basic requirements for limiting human exposure to electromagnetic fields (0 Hz – 300 GHz) | ||
74 | paragraphs first, | GOST IEC | Rotating electrical machines. Part 1. Rated | |
second – fourth, sixth – ninth | 60034-1-2014 | values of parameters and performance characteristics | ||
75 | GOST IEC | Rotating electrical machines. Part 1. Rated and | applies | |
and twelfth of Article 4, Article 5 | 60034-1-2007 | operating characteristics | until 01.06.2017 | |
76 | paragraphs | GOST IEC | Rotating electrical machines. Part 5. Classification | |
first, fourth, | 60034-5-2011 | of degrees of protection provided by the enclosures of rotating electrical machines (IP Code) | ||
77 | paragraphs | GOST IEC | Rotating electrical machines. Part 6. Methods | |
first, third | 60034-6-2007 | of cooling (IC code) | ||
78 | paragraphs | GOST IEC | Rotating electrical machines. Part 7. Classification | |
first, tenth | 60034-7-2007 | of types of construction depending on mounting arrangements and terminal box position (IM code) | ||
79 | twelfth paragraph | GOST IEC | Rotating electrical machines. Part 8. Marking | |
of Article 4, Article 5 | 60034-8-2015 | of terminals and direction of rotation | ||
80 |
paragraphs | GOST IEC 60034-9-2014 | Rotating electrical machines. Part 9. Noise limits | |
81 |
paragraphs | GOST IEC 60034-11-2014 | Rotating electrical machines. Part 11. Thermal protection | |
82 | GOST 27888-88 | Rotating electrical machines. Built-in thermal | applies | |
and twelfth of Article 4, Article 5 | (IEC 34-11) | protection. Rules for protection | until 01.06.2017 | |
83 | GOST 27917-88 | Rotating electrical machines. Built-in thermal | applies | |
(IEC 34-11-2) | protection. Thermal detectors and auxiliary control equipment used in thermal protection systems | until 01.06.2017 | ||
84 | GOST 27895-88 | Rotating electrical machines. Built-in thermal | applies | |
(IEC 34-11-3) | protection. General rules for thermal-current relays used in thermal protection systems | until 01.06.2017 | ||
85 | ST RK IEC | Rotating electrical machines. Part 11. Thermal protection | applies | |
60034-11-2012 | until 01.06.2017 | |||
86 | paragraphs | GOST 28327-89 | Rotating electrical machines. Starting characteristics | |
first and ninth of Article 4 | (IEC 34-12–80) | of single-speed three-phase squirrel-cage induction motors for voltages up to and including 660 V | ||
87 | GOST R IEC | Rotating electrical machines. Part 12. Starting | ||
60034-12-2009 | characteristics of single-speed three-phase squirrel-cage motors | |||
88 | paragraphs | GOST IEC | Rotating electrical machines. Part 14. Mechanical | |
first and fifth of Article 4 | 60034-14-2014 | vibration of certain machines with shaft heights of 56 mm and higher. Measurement, evaluation and limits of vibration severity | ||
89 | paragraphs | GOST IEC | Rotating electrical machines. Part 29. Equivalent | |
first and second of Article 4 | 60034-29-2013 | loading and superposition techniques. Indirect determination of temperature rise | ||
90 | paragraphs | GOST | Indicating analogue electrical measuring instruments | |
first, third, | 30012.1-2002 | of direct action and accessories therefor. Part 1. | ||
sixth – ninth | (IEC 60051-1–97) | Definitions and general requirements common to all parts | ||
91 | paragraphs | GOST 8711-93 | Indicating analogue electrical measuring instruments | |
first – third, | (IEC 51-2–84) | of direct action and accessories therefor. Part 2. Special requirements for ammeters and voltmeters | ||
92 | paragraphs | GOST 8476-93 | Indicating analogue electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-3–84) | of direct action and accessories for them. Part 3. Special requirements for wattmeters and varmeters | ||
93 | paragraphs | GOST 7590-93 | Analogue indicating electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-4–84) | of direct action and accessories for them. Part 4. Special requirements for frequency meters | ||
94 | paragraphs | GOST 8039-93 | Analogue indicating electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-5–85) | of direct action and accessories for them. Part 5. Special requirements for phase meters, power factor meters and synchroscopes | ||
95 | paragraphs | GOST 23706-93 | Analogue indicating electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-6–84) | of direct action and accessories for them. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters | ||
96 | paragraphs | GOST 10374-93 | Analogue indicating electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-7–84) | of direct action and accessories for them. Part 7. Special requirements for multi-function instruments | ||
97 | paragraphs | GOST 8042-93 | Analogue indicating electrical measuring instruments | |
first – third, sixth, eighth, | (IEC 51-8–84) | of direct action and accessories for them. Part 8. Special requirements for accessories | ||
98 | twelfth paragraph | GOST IEC | Lamp caps and holders together with gauges for | |
of Article 4 | 60061-1-2014 | the control of interchangeability and safety. Part 1. Lamp caps | ||
99 | GOST 28108-89 | Lamp caps. Types, main and | applies | |
(IEC 61-1–69) | connecting dimensions, gauges | until 01.06.2017 | ||
100 | paragraphs | GOST IEC | Lamp caps and holders together with gauges for | |
first – third, sixth, eighth, | 60061-4-2014 | the control of interchangeability and safety. Part 4. Guidelines and general information | ||
101 | Articles 4 and 5 | GOST IEC 60065-2013 | Audio, video and similar electronic apparatus. Safety requirements. | |
102 | Articles 4 and 5 | GOST IEC 60110-1-2013 | Power capacitors for induction heating installations. Part 1. General | |
103 | ST RK IEC | Power capacitors for induction heating installations. | applies | |
60110-1-2012 | Part 1. General | until 01.06.2017 | ||
104 | paragraphs first, | GOST IEC | Miniature fuses. Part 1. Terminology | |
third, seventh, | 60127-1-2010 | for miniature fuses and general requirements for miniature fuse-links | ||
105 | paragraphs first, | GOST IEC | Miniature fuses. Part 2. Cartridge | |
third, seventh, eighth | 60127-2-2013 | fuse-links | ||
106 | GOST R IEC | Miniature fuses. Part 2. Cartridge | applies | |
and twelfth of Article 4, Article 5 | 60127-2-2010 | fuse-links | until 01.06.2017 | |
107 | paragraphs first, | GOST IEC | Miniature fuses. Part 3. | |
third, seventh, eighth | 60127-3-2013 | Sub-miniature fuse-links | ||
108 | GOST R IEC | Miniature fuses. Part 3. | applies | |
and twelfth of Article 4, Article 5 | 60127-3-2010 | Sub-miniature fuse-links | until 01.06.2017 | |
109 | paragraphs first, | GOST IEC | Miniature fuses. Part 4. Universal | |
third, seventh, | 60127-4-2011 | modular fuse-links for through-hole and surface mounting | ||
110 | paragraphs first, | GOST IEC | Miniature fuses. Part 6. Holders for | |
third, seventh, | 60127-6-2013 | miniature cartridge fuse-links. Fuse-holders with a miniature fuse-link | ||
111 | GOST R IEC | Miniature fuses. Part 6. Holders | applies | |
of Article 4, Article 5 | 127-6-99 | of fuses for miniature fuse-links | until 01.06.2017 | |
112 | paragraphs | GOST IEC | Series capacitors for power systems. | |
first and ninth of Article 4 | 60143-2-2013 | Part 2. Protective equipment for series capacitor banks | ||
113 |
paragraphs | GOST IEC 60155-2012 | Glow starters for fluorescent lamps | |
114 | GOST IEC 60155-2002 | Glow starters for fluorescent lamps | applies until 01.06.2017 | |
115 | Articles 4 and 5 | GOST IEC 60204-1-2002 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements | |
116 | GOST R IEC 60204-1-2007 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements | ||
117 | Articles 4 and 5 | GOST IEC 60204-31-2012 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 31. Particular safety and electromagnetic compatibility requirements for sewing machines, units and systems | |
118 | Articles 4 and 5 | STB IEC 60215-2011 | Safety requirements for radio transmitting equipment | |
119 | Article 4 | GOST IEC 60227-1-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | |
120 | STB IEC 60227-1-2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | applies until 01.06.2017 | |
121 | Article 4 | GOST IEC 60227-3-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring | |
122 | Article 4 | GOST IEC 60227-4-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Sheathed cables for fixed wiring | |
123 | Article 4 | GOST IEC 60227-5-2013 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5. Flexible cables (cords) | |
124 | Article 4 | GOST IEC 60227-6-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Lift cables and cables for flexible connections | |
125 | STB IEC 60227-6-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6. Lift cables and cables for flexible connections | applies until 01.06.2017 | |
126 | Article 4 | GOST IEC 60227-7-2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Flexible cables screened and unscreened with two or more conductors | |
127 | STB IEC 60227-7-2010 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Flexible screened and unscreened cables with two or more conductors | applies until 01.06.2017 | |
128 |
paragraphs | GOST 22483-2012 (IEC 60228:2004) | Copper and aluminium conductors for cables, wires and cords | |
129 |
paragraphs | GOST IEC 60238-2012 | Screw-thread lampholders | |
130 | GOST IEC 60238-2002 | Screw-thread lampholders | applies until 01.06.2017 | |
131 | Article 4 | GOST IEC 60245-1-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | |
132 | STB IEC 60245-1-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | applies until 01.06.2017 | |
133 | Article 4 | GOST IEC 60245-3-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Heat-resistant silicone insulated cables | |
134 | STB IEC 60245-3-2012 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 3. Heat-resistant silicone insulated cables | ||
135 | Article 4 | GOST IEC 60245-4-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 4. Cords and flexible cables | |
136 | Article 4 | GOST IEC 60245-5-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Lift cables | |
137 | STB IEC 60245-5-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 5. Lift cables | ||
138 | Article 4 | GOST IEC 60245-6-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Arc welding electrode cables | |
139 | STB IEC 60245-6-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 6. Cables for electrode arc welding | ||
140 | Article 4 | GOST IEC 60245-7-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Cables with heat-resistant ethylene-vinyl acetate rubber insulation | |
141 | STB IEC 60245-7-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 7. Cables with heat-resistant ethylene-vinyl acetate rubber insulation | applies until 01.06.2017 | |
142 | Article 4 | GOST IEC 60245-8-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 8. Cords for applications requiring high flexibility | |
143 | paragraphs | GOST IEC | AC motor capacitors. Part 1. General | |
first – fourth, | 60252-1-2011 | provisions. Performance, testing and rating. Safety requirements. Guidance for installation and operation | ||
144 | paragraphs | GOST IEC | AC motor capacitors. Part 2. | |
first – fourth, seventh, eighth | 60252-2-2011 | Starting capacitors | ||
145 | STB IEC | AC motor capacitors. Part 2. | applies | |
and twelfth of Article 4, Article 5 | 60252-2-2007 | Motor starting capacitors | until 01.06.2017 | |
146 | Articles 4 and 5 | GOST IEC 60255-1-2014 | Measuring relays and protection equipment. Part 1. General requirements | |
147 | GOST 30329-95 | Electrical logic relays | applies | |
(IEC 255-1-00-75) | until 01.06.2017 | |||
148 | paragraphs | GOST IEC | Electrical relays. Part 5. Insulation coordination | |
first, sixth, | 60255-5-2014 | for measuring relays and protection equipment. Requirements and tests | ||
149 | GOST 30328-95 | Electrical relays. Insulation testing | applies | |
of Article 4, Article 5 | (IEC 255-5–77) | until 01.06.2017 | ||
150 | paragraphs | GOST IEC | Electrical relays. Part 16. Relays for measuring | |
first – fourth, sixth, eighth | 60255-16-2013 | impedance | ||
151 | paragraphs | GOST IEC | Measuring relays and protection equipment. Part 27. | |
first – fourth, sixth, eighth | 60255-27-2013 | Safety requirements | ||
152 | Articles 4 and 5 | GOST IEC 60269-1-2012 | Low-voltage fuses. Part 1. General requirements | |
153 | GOST R IEC | Low-voltage fuses. Part 1. General | ||
60269-1-2010 | requirements | |||
154 | paragraphs | GOST | Low-voltage fuses. Part 2. | |
first – fourth, | 31196.2-2012 | Supplementary requirements for fuses | ||
sixth, eighth | (IEC 60269-2:1986) | for industrial application | ||
155 | paragraphs | GOST | Low-voltage fuses. Part 2-1. | |
first – fourth, | 31196.2.1-2012 | Supplementary requirements for fuses | ||
sixth, eighth | (IEC 60269-2-1:1987) | for industrial application. Sections I – III | ||
156 |
paragraphs |
GOST 31196.3-2012 | Low-voltage fuses. Part 3. Supplementary requirements for fuses for household and similar applications | |
157 |
paragraphs | GOST IEC 60269-3-1-2011 | Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses for household and similar applications). Sections I – IV | |
158 |
paragraphs |
GOST 31196.4-2012 | Low-voltage fuses. Part 4. Supplementary requirements for fuses for the protection of semiconductor devices | |
159 |
paragraphs | GOST IEC 60269-4-1-2011 | Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I - III. Examples of types of standardized fuse-links | |
160 |
paragraphs | GOST IEC 60269-6-2013 | Low-voltage fuses. Part 6. Supplementary requirements for fuse-links for solar photovoltaic energy systems | |
161 |
paragraphs |
GOST 30849.1-2002 | Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements | |
162 |
paragraphs |
GOST 30849.2-2002 | Plugs, socket-outlets and couplers for industrial purposes. Part 2. Requirements for dimensional interchangeability of pins and contact sockets of connectors | |
163 |
paragraphs | GOST IEC 60309-4-2013 | Plugs, socket-outlets and couplers for industrial purposes. Part 4. Switched socket-outlets and connectors with or without interlock | |
164 |
paragraphs | GOST 30851.1-2002 | Electrical connectors for household and similar purposes. Part 1. General requirements and test methods | |
165 |
paragraphs |
GOST 30851.2.2-2002 | Electrical connectors for household and similar purposes. Part 2-2. Additional requirements for plugs and sockets for interconnection within appliances and test methods |
166 |
paragraphs |
GOST 30851.2.3-2012 | Appliance couplers for household and similar purposes. Part 2-3. Additional requirements for appliance couplers with a degree of protection higher than IPX0 and test methods | |
167 | Articles 4 and 5 | GOST IEC 60335-1-2015 | Household and similar electrical appliances. Safety. Part 1. General requirements | |
168 | STB IEC 60335-1-2013 | Household and similar electrical appliances. Safety. Part 1. General requirements | applies until 01.01.2018 | |
169 | GOST IEC 60335-1-2008 | Household and similar electrical appliances. Safety. Part 1. General requirements | applies until 01.06.2017 | |
170 | Articles 4 and 5 | GOST IEC 60335-2-2-2013 | Safety of household and similar electrical appliances. Part 2.2. Particular requirements for vacuum cleaners and water-suction cleaning appliances | |
171 | Articles 4 and 5 | GOST IEC 60335-2-3-2014 | Household and similar electrical appliances. Safety. Part 2-3. Particular requirements for electric irons | |
172 | GOST IEC 60335-2-3-2009 | Household and similar electrical appliances. Safety. Part 2-3. Additional requirements for electric irons | applies until 01.06.2017 | |
173 | Articles 4 and 5 | GOST IEC 60335-2-4-2013 | Safety of household and similar electrical appliances. Part 2.4. Particular requirements for spin extractors | |
174 | Articles 4 and 5 | GOST IEC 60335-2-5-2014 | Household and similar electrical appliances. Safety. Part 2-5. Particular requirements for dishwashers | |
175 | GOST IEC 60335-2-5-2012 | Safety of household and similar electrical appliances. Part 2-5. Particular requirements for dishwashers | applies until 01.01.2017 | |
176 | STB IEC 60335-2-5-2005 | Household and similar electrical appliances. Safety. Part 2-5. Additional requirements for dishwashers | applies until 01.06.2017 | |
177 | Articles 4 and 5 | GOST IEC 60335-2-6-2010 | Household and similar electrical appliances. Safety. Part 2-6. Additional requirements for stationary cooking ranges, hobs, ovens and similar appliances | |
178 | Articles 4 and 5 | GOST IEC 60335-2-7-2014 | Safety of household and similar electrical appliances. Part 2.7. Particular requirements for washing machines | |
179 | Articles 4 and 5 | GOST IEC 60335-2-8-2016 | Household and similar electrical appliances. Safety. Part 2-8. Particular requirements for shavers, hair clippers and similar appliances | |
180 | GOST IEC 60335-2-8-2012 | Safety of household and similar electrical appliances. Part 2-8. Particular requirements for shavers, hair clippers and similar appliances | applies until 01.06.2017 | |
181 | Articles 4 and 5 | GOST IEC 60335-2-9-2013 | Safety of household and similar electrical appliances. Part 2.9. Particular requirements for grills, toasters and similar portable cooking appliances | |
182 | STB IEC 60335-2-9-2008 | Household and similar electrical appliances. Safety. Part 2-9. Additional requirements for grills, toasters and similar portable cooking appliances | applies until 01.06.2017 | |
183 | Articles 4 and 5 | GOST IEC 60335-2-10-2012 | Safety of household and similar electrical appliances. Part 2-10. Particular requirements for floor treatment machines and wet scrubbing machines | |
184 | STB IEC 60335-2-10-2004 | Household and similar electrical appliances. Safety. Part 2-10. Additional requirements for floor treatment machines and wet cleaning machines | applies until 01.06.2017 | |
185 | Articles 4 and 5 | GOST IEC 60335-2-11-2016 | Safety of household and similar electrical appliances. Part 2-11. Particular requirements for tumble dryers | |
186 | GOST IEC 60335-2-11-2012 | Safety of household and similar electrical appliances. Part 2-11. Particular requirements for tumble dryers | applies until 01.06.2017 | |
187 | Articles 4 and 5 | GOST IEC 60335-2-12-2012 | Safety of household and similar electrical appliances. Part 2-12. Particular requirements for warming plates and similar appliances. | |
188 | Articles 4 and 5 | GOST IEC 60335-2-13-2013 | Safety of household and similar electrical appliances. Part 2-13. Particular requirements for deep fat fryers, frying pans and similar appliances | |
189 | Articles 4 and 5 | GOST IEC 60335-2-14-2013 | Safety of household and similar electrical appliances. Part 2-14. Particular requirements for kitchen machines | |
190 | Articles 4 and 5 | GOST IEC 60335-2-15-2014 | Household and similar electrical appliances. Safety. Part 2-15. Particular requirements for appliances for heating liquids | |
191 | GOST IEC 60335-2-15-2012 | Household and similar electrical appliances. Safety. Part 2-15. Particular requirements for appliances for heating liquids | applies until 01.01.2017 | |
192 | STB IEC 60335-2-15-2006 | Household and similar electrical appliances. Safety. Part 2-15. Additional requirements for appliances for heating liquids | applies until 01.06.2017 | |
193 | Articles 4 and 5 | GOST IEC 60335-2-16-2012 | Safety of household and similar electrical appliances. Part 2-16. Particular requirements for food waste disposers | |
194 | Articles 4 and 5 | GOST IEC 60335-2-17-2014 | Household and similar electrical appliances. Safety. Part 2-17. Particular requirements for blankets, pads, clothing and similar flexible heating appliances | |
195 | GOST IEC 60335-2-17-2012 | Safety of household and similar electrical appliances. Part 2-17. Particular requirements for blankets, pads, clothing and similar flexible heating appliances | applies until 01.01.2017 | |
196 | Articles 4 and 5 | GOST IEC 60335-2-21-2014 | Household and similar electrical appliances. Safety. Part 2-21. Particular requirements for storage water heaters | |
197 | GOST IEC 60335-2-21-2012 | Safety of household and similar electrical appliances. Part 2-21. Particular requirements for storage water heaters | applies until 01.01.2017 | |
198 | STB IEC 60335-2-21-2005 | Household and similar electrical appliances. Safety. Part 2-21. Additional requirements for storage water heaters | applies until 01.06.2017 | |
199 | Articles 4 and 5 | GOST IEC 60335-2-23-2009 | Household and similar electrical appliances. Part 2-23. Additional requirements for appliances for skin or hair care | |
200 | Articles 4 and 5 | GOST IEC 60335-2-24-2016 | Safety of household and similar electrical appliances. Part 2.24. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers | |
201 | GOST IEC 60335-2-24-2012 | Safety of household and similar electrical appliances. Part 2.24. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers | applies until 01.06.2017 | |
202 | СТБ IEC 60335-2-24-2013 | Household and similar electrical appliances. Safety. Part 2-24. Additional requirements for refrigerating appliances, ice-cream appliances and ice-makers | applies until 01.06.2017 | |
203 | Articles 4 and 5 | ГОСТ IEC 60335-2-25-2014 | Safety of household and similar electrical appliances. Part 2-25. Particular requirements for microwave ovens, including combination microwave ovens | |
204 | СТБ IEC 60335-2-25-2012 | Household and similar electrical appliances. Safety. Part 2-25. Additional requirements for microwave ovens, including combination microwave ovens | applies until 01.06.2017 | |
205 | Articles 4 and 5 | ГОСТ IEC 60335-2-26-2013 | Safety of household and similar electrical appliances. Part 2-26. Particular requirements for clocks | |
206 | Articles 4 and 5 | ГОСТ IEC 60335-2-27-2014 | Safety of household and similar electrical appliances. Part 2-27. Particular requirements for ultraviolet and infrared radiation appliances for skin care | |
207 | ГОСТ МЭК 60335-2-27-2009 | Household and similar electrical appliances. Safety. Part 2-27. Additional requirements for appliances exposing the skin to ultraviolet and infrared radiation | applies until 01.06.2017 | |
208 | Articles 4 and 5 | ГОСТ IEC 60335-2-28-2012 | Safety of household and similar electrical appliances. Part 2-28. Particular requirements for sewing machines | |
209 | СТБ МЭК 60335-2-28-2006 | Household and similar electrical appliances. Safety. Part 2-28. Additional requirements for sewing machines | applies until 01.06.2017 | |
210 | Articles 4 and 5 | ГОСТ IEC 60335-2-29-2012 | Safety of household and similar electrical appliances. Part 2-29. Particular requirements for battery chargers | |
211 | Articles 4 and 5 | ГОСТ IEC 60335-2-30-2013 | Safety of household and similar electrical appliances. Part 2-30. Particular requirements for room heaters | |
212 | СТБ IEC 60335-2-30-2013 | Household and similar electrical appliances. Safety. Part 2-30. Additional requirements for room heaters | applies until 01.06.2017 | |
213 | Articles 4 and 5 | ГОСТ IEC 60335-2-31-2014 | Household and similar electrical appliances. Safety. Part 2-31. Additional requirements for range hoods and other cooking fume extractors | |
214 | ГОСТ IEC 60335-2-31-2010 | Household and similar electrical appliances. Safety. Part 2-31. Additional requirements for range hoods and other cooking fume extractors | applies until 01.06.2017 | |
215 | Articles 4 and 5 | ГОСТ IEC 60335-2-32-2012 | Safety of household and similar electrical appliances. Part 2-32. Particular requirements for massage appliances | |
216 | Articles 4 and 5 | ГОСТ IEC 60335-2-34-2016 | Household and similar electrical appliances. Safety. Part 2-34. Particular requirements for motor-compressors | |
217 | ГОСТ IEC 60335-2-34-2012 | Safety of household and similar electrical appliances. Part 2-34. Additional requirements for motor-compressors | applies until 01.06.2017 | |
218 | СТБ IEC 60335-2-34-2010 | Household and similar electrical appliances. Safety. Part 2-34. Additional requirements for motor-compressors | applies until 01.06.2017 | |
219 | Articles 4 and 5 | ГОСТ IEC 60335-2-35-2014 | Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters | |
220 | ГОСТ IEC 60335-2-35-2009 | Safety of household and similar electrical appliances. Part 2-35. Additional requirements for instantaneous water heaters | applies until 01.06.2017 | |
221 | Articles 4 and 5 | СТБ МЭК 60335-2-36-2005 | Household and similar electrical appliances. Safety. Part 2-36. Additional requirements for electric cooking ranges, ovens, hotplates and heating elements for catering establishments | |
222 | Articles 4 and 5 | ГОСТ IEC 60335-2-37-2012 | Safety of household and similar electrical appliances. Part 2-37. Particular requirements for electric deep fat fryers for catering establishments | |
223 | СТБ IEC 60335-2-37-2011 | Household and similar electrical appliances. Safety. Part 2-37. Additional requirements for electric deep fat fryers for catering establishments | applies until 01.06.2017 | |
224 | Articles 4 and 5 | ГОСТ IEC 60335-2-38-2013 | Safety of household and similar electrical appliances. Part 2-38. Particular requirements for electric contact cooking appliances with one and two heating surfaces for catering establishments | |
225 | Articles 4 and 5 | ГОСТ IEC 60335-2-39-2013 | Safety of household and similar electrical appliances. Part 2-39. Particular requirements for electric multi-purpose cooking pans for catering establishments | |
226 | Articles 4 and 5 | ГОСТ IEC 60335-2-40-2016 | Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | |
227 | ГОСТ IEC 60335-2-40-2010 | Household and similar electrical appliances. Safety. Part 2-40. Additional requirements for electrical heat pumps, air-conditioners and dehumidifiers | applies until 01.06.2017 | |
228 | Articles 4 and 5 | ГОСТ IEC 60335-2-41-2015 | Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps | |
229 | ГОСТ МЭК 60335-2-41-2009 | Household and similar electrical appliances. Safety. Part 2-41. Additional requirements for pumps | applies until 01.06.2017 | |
230 | Articles 4 and 5 | ГОСТ IEC 60335-2-42-2013 | Safety of household and similar electrical appliances. Part 2-42. Particular requirements for electric forced convection ovens, steam cookers and steam-convection ovens for catering establishments | |
231 | Articles 4 and 5 | ГОСТ IEC 60335-2-43-2012 | Safety of household and similar electrical appliances. Part 2-43. Particular requirements for clothes dryers and towel rails | |
232 | Articles 4 and 5 | ГОСТ IEC 60335-2-44-2016 | Safety of household and similar electrical appliances. Part 2-44. Particular requirements for ironing machines | |
233 | ГОСТ IEC 60335-2-44-2012 | Safety of household and similar electrical appliances. Part 2-44. Particular requirements for ironing machines | applies until 01.06.2017 | |
234 | Articles 4 and 5 | ГОСТ IEC 60335-2-45-2014 | Safety of household and similar electrical appliances. Part 2-45. Particular requirements for portable heating tools and similar appliances | |
235 | Articles 4 and 5 | GOST IEC 60335-2-47-2012 | Safety of household and similar electrical appliances. Part 2-47. Particular requirements for commercial electric boiling pans | |
236 | STB IEC 60335-2-47-2011 | Household and similar electrical appliances. Safety. Part 2-47. Additional requirements for commercial electric boiling pans | applies until 01.06.2017 | |
237 | Articles 4 and 5 | GOST IEC 60335-2-48-2013 | Safety of household and similar electrical appliances. Part 2-48. Particular requirements for commercial electric grillers and toasters | |
238 | Articles 4 and 5 | STB IEC 60335-2-49-2010 | Household and similar electrical appliances. Safety. Part 2-49. Additional requirements for commercial electric hot cupboards | |
239 | Articles 4 and 5 | GOST IEC 60335-2-50-2013 | Safety of household and similar electrical appliances. Part 2-50. Particular requirements for electric bains-marie for catering kitchens | |
240 | Articles 4 and 5 | GOST IEC 60335-2-51-2012 | Safety of household and similar electrical appliances. Part 2.51. Particular requirements for stationary circulation pumps for heating and service water installations | |
241 | Articles 4 and 5 | GOST IEC 60335-2-52-2013 | Safety of household and similar electrical appliances. Part 2.52. Particular requirements for oral hygiene appliances | |
242 | Articles 4 and 5 | GOST IEC 60335-2-53-2014 | Household and similar electrical appliances. Safety. Part 2.53. Particular requirements for sauna heating appliances and infrared cabins | |
243 | STB IEC 60335-2-53-2005 | Household and similar electrical appliances. Safety. Part 2-53. Additional requirements for sauna heating appliances | applies until 01.06.2017 | |
244 | Articles 4 and 5 | GOST IEC 60335-2-54-2014 | Safety of household and similar electrical appliances. Part 2.54. Particular requirements for surface-cleaning appliances for household use employing liquids or steam | |
245 | GOST IEC 60335-2-54-2012 | Safety of household and similar electrical appliances. Part 2.54. Particular requirements for surface-cleaning appliances employing liquids or steam | applies until 01.06.2017 | |
246 | Articles 4 and 5 | GOST IEC 60335-2-55-2013 | Safety of household and similar electrical appliances. Part 2-55. Particular requirements for electrical appliances for use with aquariums and garden ponds | |
247 | Articles 4 and 5 | GOST IEC 60335-2-56-2013 | Safety of household and similar electrical appliances. Part 2-56. Particular requirements for projectors and similar appliances | |
248 | Articles 4 and 5 | GOST IEC 60335-2-58-2009 | Household and similar electrical appliances. Safety. Part 2-58. Additional requirements for commercial dishwashing machines | |
249 | Articles 4 and 5 | GOST IEC 60335-2-59-2012 | Safety of household and similar electrical appliances. Part 2-59. Particular requirements for insect killers | |
250 |
GOST R 52161.2.59-2008 | Safety of household and similar electrical appliances. Part 2.59. Particular requirements for insect killers | applies until 01.06.2017 | |
251 | Articles 4 and 5 | GOST IEC 60335-2-60-2002 | Safety of household and similar electrical appliances. Additional requirements for whirlpool baths and test methods |
252 |
GOST R 52161.2.60-2011 | Safety of household and similar electrical appliances. Part 2.60. Particular requirements for whirlpool baths and whirlpool baths for spa salons | ||
253 | Articles 4 and 5 | GOST IEC 60335-2-61-2013 | Safety of household and similar electrical appliances. Part 2-61. Particular requirements for thermal storage room heaters | |
254 | Articles 4 and 5 | GOST IEC 60335-2-62-2013 | Safety of household and similar electrical appliances. Part 2-62. Particular requirements for electrically heated rinsing sinks for catering establishments | |
255 | Articles 4 and 5 | GOST IEC 60335-2-65-2012 | Safety of household and similar electrical appliances. Part 2-65. Particular requirements for air-cleaning appliances | |
256 | STB IEC 60335-2-65-2011 | Household and similar electrical appliances. Safety. Part 2-65. Supplementary requirements for air-cleaning appliances | applies until 01.06.2017 | |
257 | Articles 4 and 5 | GOST IEC 60335-2-66-2013 | Safety of household and similar electrical appliances. Part 2-66. Particular requirements for water-bed heaters | |
258 | Articles 4 and 5 | GOST IEC 60335-2-70-2015 | Safety of household and similar electrical appliances. Supplementary requirements for milking machines | |
259 | GOST IEC 60335-2-70-2011 | Safety of household and similar electrical appliances. Supplementary requirements for milking machines | applies until 01.01.2018 | |
260 | STB IEC 60335-2-70-2013 | Household and similar electrical appliances. Safety. Part 2-70. Supplementary requirements for milking machines | applies until 01.01.2018 | |
261 | Articles 4 and 5 | GOST IEC 60335-2-71-2013 | Safety of household and similar electrical appliances. Part 2-71. Particular requirements for electrical heating appliances for breeding and rearing animals | |
262 | Articles 4 and 5 |
GOST R 52161.2.73-2011 | Safety of household and similar electrical appliances. Part 2.73. Particular requirements for fixed immersion heaters | |
263 | Articles 4 and 5 | GOST IEC 60335-2-74-2012 | Safety of household and similar electrical appliances. Part 2-74. Particular requirements for portable immersion heaters | |
264 | Articles 4 and 5 | GOST IEC 60335-2-75-2013 | Safety of household and similar electrical appliances. Part 2-75. Particular requirements for dispensing appliances and vending machines for catering establishments | |
265 | Articles 4 and 5 | GOST IEC 60335-2-76-2013 | Safety of household and similar electrical appliances. Part 2-76. Particular requirements for electric fence energizers | |
266 | Articles 4 and 5 | GOST IEC 60335-2-77-2011 | Safety of household and similar electrical appliances. Supplementary requirements for manually controlled lawnmowers and test methods | |
267 | Articles 4 and 5 | GOST IEC 60335-2-78-2013 | Safety of household and similar electrical appliances. Part 2-78. Particular requirements for outdoor barbecues | |
268 | Articles 4 and 5 | GOST IEC 60335-2-79-2014 | Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high-pressure cleaners and steam cleaners | |
269 | Articles 4 and 5 | GOST IEC 60335-2-80-2012 | Safety of household and similar electrical appliances. Part 2.80. Particular requirements for fans | |
270 | Articles 4 and 5 | GOST IEC 60335-2-81-2013 | Safety of household and similar electrical appliances. Part 2-81. Supplementary requirements for foot warmers and heating mats | |
271 | Articles 4 and 5 | STB IEC 60335-2-82-2011 | Household and similar electrical appliances. Safety. Part 2-82. Supplementary requirements for amusement machines and self-service machines | |
272 | Articles 4 and 5 | GOST IEC 60335-2-83-2013 | Safety of household and similar electrical appliances. Part 2-83. Supplementary requirements for heated gullies intended for roof drainage | |
273 | Articles 4 and 5 | GOST IEC 60335-2-84-2013 | Safety of household and similar electrical appliances. Part 84. Particular requirements for toilets | |
274 | Articles 4 and 5 | GOST IEC 60335-2-85-2012 | Safety of household and similar electrical appliances. Part 2.85. Particular requirements for fabric steamers | |
275 | Articles 4 and 5 | GOST IEC 60335-2-86-2015 | Household and similar electrical appliances. Safety. Part 2-86. Supplementary requirements for electrical devices for catching fish | |
276 | Articles 4 and 5 | GOST IEC 60335-2-87-2015 | Safety of household and similar electrical appliances. Part 2-87. Particular requirements for electrical equipment for stunning livestock | |
277 | GOST IEC 60335-2-87-2004 | Safety of household and similar electrical appliances. Part 2-87. Supplementary requirements for electrical equipment for stunning livestock | applies until 01.01.2018 | |
278 | Articles 4 and 5 | GOST IEC 60335-2-88-2013 | Safety of household and similar electrical appliances. Part 2-88. Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems | |
279 | Articles 4 and 5 | GOST IEC 60335-2-89-2013 | Safety of household and similar electrical appliances. Part 2-89. Particular requirements for commercial refrigerating equipment with an incorporated or remote refrigerant condensing unit or compressor for catering establishments | |
280 | Articles 4 and 5 | GOST IEC 60335-2-90-2013 | Safety of household and similar electrical appliances. Part 2-90. Particular requirements for microwave ovens for catering establishments | |
281 | Articles 4 and 5 | GOST IEC 60335-2-92-2004 | Safety of household and similar electrical appliances. Part 2-92. Supplementary requirements for pedestrian-controlled lawn scarifiers and aerators | |
282 | Articles 4 and 5 | GOST IEC 60335-2-94-2004 | Safety of household and similar electrical appliances. Part 2-94. Supplementary requirements for scissors-type grass shears | |
283 | Articles 4 and 5 | GOST IEC 60335-2-95-2013 | Safety of household and similar electrical appliances. Part 2-95. Particular requirements for drives for vertically moving garage doors for residential use | |
284 | Articles 4 and 5 | GOST IEC 60335-2-96-2012 | Safety of household and similar electrical appliances. Part 2-96. Particular requirements for flexible sheet heating elements for heating residential premises | |
285 | Articles 4 and 5 | GOST IEC 60335-2-97-2013 | Safety of household and similar electrical appliances. Part 2-97. Particular requirements for drives for opening rolling shutters, awnings, blinds and similar equipment | |
286 | Articles 4 and 5 | GOST IEC 60335-2-98-2012 | Safety of household and similar electrical appliances. Part 2-98. Supplementary requirements for humidifiers | |
287 | Articles 4 and 5 | GOST IEC 60335-2-101-2013 | Safety of household and similar electrical appliances. Part 2-101. Particular requirements for vaporizers | |
288 | Articles 4 and 5 | GOST IEC 60335-2-102-2014 | Household and similar electrical appliances. Safety. Part 2-102. Supplementary requirements for appliances burning gaseous, liquid and solid fuels and having electrical connections | |
289 | Articles 4 and 5 | GOST IEC 60335-2-103-2013 | Safety of household and similar electrical appliances. Part 2-103. Particular requirements for drives for gates, doors and windows | |
290 | Articles 4 and 5 | GOST IEC 60335-2-104-2013 | Household and similar electrical appliances. Safety. Part 2-104. Supplementary requirements for appliances intended for the recovery and/or recycling of refrigerants in air-conditioning and refrigeration equipment | |
291 | STB IEC 60335-2-104-2011 | Household and similar electrical appliances. Safety. Part 2-104. Supplementary requirements for appliances intended for the recovery and/or recycling of refrigerants in air-conditioning and refrigeration equipment | applies until 01.06.2017 | |
292 | Articles 4 and 5 | GOST IEC 60335-2-105-2015 | Household and similar electrical appliances. Safety. Part 2-105. Supplementary requirements for multifunctional shower cabinets | |
293 | Articles 4 and 5 | GOST IEC 60335-2-106-2013 | Electrical appliances for household and similar purposes. Safety. Part 2-106. Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings | |
294 | Articles 4 and 5 | GOST IEC 60335-2-108-2014 | Household and similar electrical appliances. Safety. Part 2-108. Supplementary requirements for electrolysers | |
295 | Articles 4 and 5 | GOST IEC 60335-2-109-2013 | Safety of household and similar electrical appliances. Part 2-109. Particular requirements for UV radiation water treatment appliances | |
296 | paragraphs one – four, | GOST IEC 60358-1-2014 | Coupling capacitors and capacitor dividers. Part 1. General rules | |
297 |
six, seven | ST RK IEC 60358-2012 | Coupling capacitors and capacitor dividers | applies until 01.06.2017 |
298 |
paragraphs | GOST IEC 60400-2011 | Lampholders for tubular fluorescent lamps and starterholders | |
299 |
paragraphs | GOST 31998.1-2012 | Safety requirements for incandescent lamps. Part 1. Tungsten filament lamps for domestic and similar general lighting purposes | |
300 | STB IEC 60432-1-2008 | Incandescent lamps. Safety requirements. Part 1. Tungsten filament lamps for domestic and similar general lighting purposes | ||
301 |
paragraphs | GOST IEC 60432-2-2011 | Safety requirements for incandescent lamps. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes | |
302 | STB IEC 60432-2-2008 | Incandescent lamps. Safety requirements. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes | applies until 01.06.2017 | |
303 |
paragraphs |
GOST R | Incandescent lamps. Safety requirements. Part 3. Tungsten halogen lamps (non-vehicle) | |
304 |
paragraphs | STB IEC 60439-1-2007 | Low-voltage switchgear and controlgear assemblies. Part 1. Assemblies subject to full or partial type testing | |
305 |
GOST R 51321.1-2007 | Low-voltage switchgear and controlgear assemblies. Part 1. Fully or partially tested assemblies. General technical requirements and test methods | ||
306 |
paragraphs | STB IEC 60439-2-2007 | Low-voltage switchgear and controlgear assemblies. Part 2. Supplementary requirements for busbar trunking systems (busways) | |
307 |
GOST R 51321.2-2009 | Low-voltage switchgear and controlgear assemblies. Part 2. Supplementary requirements for busbar trunking systems | ||
308 |
paragraphs | GOST IEC 60439-3-2012 | Low-voltage switchgear and controlgear assemblies. Part 3. Supplementary requirements for distribution and control assemblies intended for operation in locations accessible to unskilled persons, and test methods | |
309 | STB IEC 60439-3-2007 | Low-voltage switchgear and controlgear assemblies. Part 3. Supplementary requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards | applies until 01.06.2017 | |
310 | paragraphs one – three, six, eight | GOST IEC 60439-4-2013 | Low-voltage switchgear and controlgear assemblies. Part 4. Supplementary requirements for assemblies for construction sites | |
311 | and eleven | STB IEC | Low-voltage assemblies for distribution | applies |
of Article 4 | 60439-4-2007 | and control. Part 4. Supplementary requirements for assemblies for construction sites | until 01.06.2017 | |
312 | GOST R | Low-voltage assemblies for distribution | applies | |
51321.4-2011 | and control. Part 4. Supplementary requirements for assemblies for construction sites (ACS) | until 01.06.2017 | ||
313 | paragraph twelve | GOST R | Basic principles and safety principles for interface | |
of Article 4, Article 5 | 50462-2009 (IEC 60446:2007) | "man-machine", marking and identification. Identification of conductors by colours and alphanumerics | ||
314 |
paragraphs | GOST IEC 60477-2013 | Laboratory direct current resistors | |
315 | paragraphs | GOST IEC | Laboratory resistance standards. Part 2. Standards | |
one, two, | 60477-2-2013 | of alternating current resistance, laboratory | ||
316 | Article 4 | ST RK IEC 60502-1-2012 | Power cables with extruded insulation and cable accessories for rated voltages from 1 kV (Um=1, 2kV) up to 30 kV (Um=36kV). Part 1. Cables for rated voltages of 1 kV (Um=1, 2kV) and 3 kV (Um=3, 6kV) | |
317 | STB IEC 60502-1-2012 | Power cables with extruded insulation and cable accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV). Part 1. Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | ||
318 |
paragraphs | GOST IEC 60519-1-2011 | Safety of electrothermal equipment. Part 1. General requirements | |
319 |
paragraphs first, |
GOST 31636.2-2012 | Safety of electrothermal equipment. Part 2. Particular requirements for resistance heating installations | |
320 |
paragraphs |
GOST 31636.3-2012 | Safety of electrothermal equipment. Part 3. Particular requirements for electrothermal devices for induction and direct resistance heating and for induction furnaces | |
321 |
paragraphs | GOST IEC 60519-4-2015 | Safety of electrothermal equipment. Part 4. Additional requirements for arc furnace equipment | |
322 |
paragraphs |
GOST R | Safety of electrothermal equipment. Part 6. Safety specifications for industrial microwave heating equipment | |
323 |
paragraphs |
GOST 31636.7-2012 | Safety of electrothermal equipment. Part 7. Particular requirements for electron-beam furnaces | |
324 |
paragraphs | GOST IEC 60519-8-2015 | Electroheating installations. Safety. Part 8. Particular requirements for electroslag remelting furnaces | |
325 |
paragraphs |
GOST R | Safety of electrothermal equipment. Part 9. Particular requirements for high-frequency dielectric heating installations | |
326 |
paragraphs | GOST IEC 60519-10-2015 | Electroheating installations. Safety. Part 10. Particular requirements for electrical resistance heating systems for industrial and commercial applications | |
327 |
paragraphs | GOST IEC 60519-21-2015 | Electroheating installations. Safety. Part 21. Particular requirements for resistance heating installations. Glass heating and melting equipment | |
328 |
paragraphs | GOST IEC 60523-2014 | Direct current potentiometers | |
329 |
paragraphs | GOST 11282-93 (IEC 524-75) | Direct current resistive voltage dividers | |
330 |
paragraphs | GOST 14254-2015 (IEC 60529:2013) | Degrees of protection provided by enclosures (IP Code) |
331 | GOST 14254-96 (IEC 529-89) | Degrees of protection provided by enclosures (IP Code) | applies until 01.01.2018 | |
332 |
paragraphs | GOST 7165-93 (IEC 564-77) | Direct current bridges for measuring resistance | |
333 |
paragraphs | GOST IEC 60570-2012 | Electrical supply track systems for luminaires | |
334 | GOST IEC 60570-2-1-2011 | Electrical supply track systems for luminaires. Part 2. Combined supply track systems. Section 1. Class I and Class II supply track systems | applies until 01.06.2017 | |
335 |
paragraphs | GOST IEC 60598-1-2013 | Luminaires. Part 1. General requirements and tests | |
336 |
paragraphs | GOST IEC 60598-2-1-2011 | Luminaires. Part 2. Particular requirements. Section 1. Fixed general purpose luminaires | |
337 | STB IEC 598-2-1-99 | Luminaires. Part 2. Particular requirements. Section 1. Fixed general purpose luminaires | applies until 01.06.2017 | |
338 |
paragraphs | GOST IEC 60598-2-2-2012 | Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires | |
339 | STB IEC 60598-2-2-99 | Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires | applies until 01.06.2017 | |
340 |
paragraphs | GOST IEC 60598-2-3-2012 | Luminaires. Part 2. Particular requirements. Section 3. Luminaires for road and street lighting | |
341 | STB IEC 60598-2-3-2009 | Luminaires. Part 2-3. Supplementary requirements for luminaires for road and street lighting | ||
342 | paragraphs first – fourth | GOST IEC 60598-2-4-2012 | Luminaires. Part 2. Particular requirements. Section 4. Portable general purpose luminaires | |
343 |
and sixth – | STB IEC 60598-2-4-99 | Luminaires. Part 2. Particular requirements. Section 4. Portable general purpose luminaires | applies until 01.06.2017 |
344 |
paragraphs | GOST IEC 60598-2-5-2012 | Luminaires. Part 2. Particular requirements. Section 5. Floodlights | |
345 | STB IEC 60598-2-5-2002 | Luminaires. Part 2. Particular requirements. Section 5. Floodlights | applies until 01.06.2017 | |
346 |
paragraphs | GOST IEC 60598-2-6-2012 | Luminaires. Part 2. Particular requirements. Section 6. Luminaires with built-in transformers or converters for filament lamps | |
347 | STB IEC 60598-2-6-2002 | Luminaires. Part 2. Particular requirements. Section 6. Luminaires with built-in transformers or converters for filament lamps | applies until 01.06.2017 | |
348 |
paragraphs | GOST IEC 60598-2-7-2011 | Luminaires. Part 2. Particular requirements. Section 7. Portable luminaires for garden use | |
349 | STB IEC 60598-2-7-2002 | Luminaires. Part 2. Particular requirements. Section 7. Portable luminaires for garden use | applies until 01.06.2017 | |
350 |
paragraphs | GOST IEC 60598-2-8-2011 | Luminaires. Part 2. Particular requirements. Section 8. Handlamps | |
351 | STB IEC 60598-2-8-2002 | Luminaires. Part 2. Particular requirements. Section 8. Handlamps | applies until 01.06.2017 | |
352 |
paragraphs | GOST IEC 60598-2-9-2011 | Luminaires. Part 2. Particular requirements. Section 9. Photo and film luminaires (non-professional) | |
353 | STB IEC 60598-2-9-2003 | Luminaires. Part 2. Particular requirements. Section 9. Luminaires for photo and film shooting (non-professional) | applies until 01.06.2017 | |
354 |
paragraphs | GOST IEC 60598-2-10-2012 | Luminaires. Part 2-10. Particular requirements. Portable children's luminaires | |
355 | STB IEC 60598-2-10-2003 | Luminaires. Part 2. Particular requirements. Section 10. Portable children's play luminaires | applies until 01.06.2017 | |
356 |
paragraphs | GOST R IEC 60598-2-11-2010 | Luminaires. Part 2-11. Particular requirements. Aquarium luminaires | |
357 |
paragraphs | STB IEC 60598-2-12-2009 | Luminaires. Part 2-12. Supplementary requirements for night lights for mounting in a mains socket-outlet | |
358 |
paragraphs | GOST IEC 60598-2-13-2011 | Luminaires. Part 2-13. Particular requirements. Ground recessed luminaires | |
359 |
paragraphs | GOST IEC 60598-2-14-2014 | Luminaires. Part 2-14. Supplementary requirements. Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment | |
360 |
paragraphs | GOST IEC 60598-2-17-2011 | Luminaires. Part 2. Particular requirements. Section 17. Luminaires for indoor and outdoor lighting of stages, television, film and photographic studios | |
361 | STB IEC 598-2-17-2002 | Luminaires. Part 2. Particular requirements. Section 17. Luminaires for indoor and outdoor lighting of stages, television, film and photographic studios | applies until 01.06.2017 | |
362 |
paragraphs | GOST IEC 60598-2-19-2012 | Luminaires. Part 2. Particular requirements. Section 19. Ventilated luminaires. Safety requirements | |
363 | STB IEC 60598-2-19-2003 | Luminaires. Part 2. Particular requirements. Section 19. Ventilated luminaires. Safety requirements | applies until 01.06.2017 | |
364 |
paragraphs | GOST IEC 60598-2-20-2012 | Luminaires. Part 2-20. Particular requirements. Lighting chains | |
365 |
paragraphs | GOST IEC 60598-2-22-2012 | Luminaires. Part 2. Particular requirements. Section 22. Luminaires for emergency lighting | |
366 | STB IEC 60598-2-22-2011 | Luminaires. Part 2-22. Supplementary requirements. Luminaires for emergency lighting | ||
367 |
paragraphs | GOST IEC 60598-2-23-2012 | Luminaires. Part 2. Particular requirements. Section 23. Extra-low-voltage lighting systems for filament lamps | |
368 | STB IEC 60598-2-23-2002 | Luminaires. Part 2. Particular requirements. Section 23. Extra-low-voltage lighting systems for filament lamps | ||
369 | paragraphs one – four | GOST IEC 60598-2-24-2011 | Luminaires. Part 2-24. Particular requirements. Luminaires with limited surface temperature | |
370 | and six – | STB IEC | Luminaires. Part 2-24. Luminaires with limited | applies |
twelve of Article 4, Article 5 | 60598-2-24-2002 | surface temperature | until 01.06.2017 | |
371 | paragraphs | GOST IEC | Luminaires. Part 2. Particular requirements. Section 25. | |
one – four | 60598-2-25-2011 | Luminaires for use in clinical areas of hospitals and other medical institutions | ||
372 | STB IEC | Luminaires. Part 2. Particular requirements. Section 25. | applies | |
of Article 4, Article 5 | 60598-2-25-2002 | Luminaires for use in clinical areas of hospitals and other medical institutions | until 01.06.2017 | |
373 |
paragraphs | GOST IEC 60618-2013 | Inductive voltage dividers | |
374 | paragraphs | GOST IEC | Insulation coordination for equipment of low-voltage systems. | |
one and six of Article 4 | 60664-3-2015 | Part 3. Use of coating, potting and moulding for protection against pollution | ||
375 | paragraphs | STB IEC | Electroacoustics. Audiometric equipment. Part 1. | |
one, five | 60645-1-2014 | Pure-tone audiometers | ||
376 | paragraphs | GOST R | High-pressure sodium lamps. Performance | |
one, five | 53073-2008 (IEC 60662:2002) | requirements | ||
377 | paragraphs |
GOST R IEC | Insulation coordination for equipment within low-voltage | |
one, three | systems. Part 1. Principles, requirements and tests | |||
378 |
paragraphs | GOST 30850.1-2002 | Switches for household and similar fixed electrical installations. Part 1. General requirements and test methods | |
379 |
GOST R 51324.1-2012 | Switches for household and similar fixed electrical installations. Part 1. General requirements | ||
380 |
paragraphs | GOST 30850.2.1-2002 | Switches for household and similar fixed electrical installations. Part 2-1. Additional requirements for semiconductor switches and test methods | |
381 |
GOST R 51324.2.1-2012 | Switches for household and similar fixed electrical installations. Part 2-1. Additional requirements for semiconductor switches | ||
382 |
paragraphs | GOST 30850.2.2-2002 | Switches for household and similar fixed electrical installations. Part 2-2. Additional requirements for remote-control switches (RCS) and test methods | |
383 |
GOST R 51324.2.2-2012 | Switches for household and similar fixed electrical installations. Part 2-2. Additional requirements for remote-control switches (RCS) | ||
384 |
paragraphs | GOST 30850.2.3-2002 | Switches for household and similar fixed electrical installations. Part 2-3. Additional requirements for time-delay switches (timers) and test methods | |
385 | of Article 4, Article 5 |
GOST R 51324.2.3-2012 | Switches for household and similar fixed electrical installations. Part 2-3. Additional requirements for time-delay switches (timers) | |
386 |
paragraphs | GOST IEC 60669-2-6-2015 | Switches for household and similar fixed electrical installations. Part 2-6 Additional requirements for emergency switches for exterior and interior luminaires | |
387 |
paragraphs |
GOST 32126.1-2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 1. General requirements | |
388 |
paragraphs | GOST IEC 60670-21-2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 21. Special requirements for boxes and enclosures with provision for suspension means | |
389 |
paragraphs |
GOST R | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 22. Special requirements for connecting boxes and enclosures | |
390 |
paragraphs |
GOST 32126.23-2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 23. Special requirements for floor boxes and enclosures | |
391 |
paragraphs | GOST IEC 60670-24-2013 | Boxes and enclosures for electrical devices for household and similar fixed electrical installations. Part 24. Additional requirements for enclosures for housing protective devices and other electrical equipment with power dissipation | |
392 |
GOST R | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24. Special requirements for boxes and enclosures intended to house protective and similar devices with high power dissipation | applies until 01.06.2017 | |
393 |
paragraphs | GOST IEC 60691-2012 | Thermal-links. Requirements and application guide | |
394 |
paragraphs | GOST R IEC 60695-1-1-2003 | Fire hazard testing. Part 1-1. Guidance for assessing the fire hazard of electrotechnical products. General guidelines | |
395 |
paragraphs | GOST IEC 60715-2013 | Low-voltage switchgear and controlgear. Installation and mounting of electrical devices on rails in switchgear and controlgear assemblies | |
396 | STB IEC 60715-2006 | Low-voltage switchgear and controlgear. Installation and mounting of electrical devices on rails in switchgear and controlgear assemblies | applies until 01.06.2017 | |
397 | GOST R IEC 60715-2003 | Low-voltage switchgear and controlgear. Mounting and fixing of electrical devices on rails in low-voltage switchgear and controlgear assemblies | applies until 01.06.2017 | |
398 |
paragraphs one – three, six, eight, | GOST IEC 60728-11-2014 | Cable networks for sound and television signals and interactive services. Part 11. Safety | |
399 |
paragraphs one – three, six, eight, | GOST IEC 60730-1-2016 | Automatic electrical controls for household and similar use. Part 1. General requirements | |
400 | GOST IEC 60730-1-2011 | Automatic electrical controls for household and similar use. General requirements and test methods | applies until 01.01.2018 | |
401 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-2-2011 | Automatic electrical controls for household and similar use. Part 2-2. Particular requirements for thermal motor protectors | |
402 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-3-2014 | Automatic electrical controls for household and similar use. Part 2-3. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | |
403 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-4-2011 | Automatic electrical controls for household and similar use. Part 2-4. Particular requirements for thermal motor protectors for hermetic and semi-hermetic type motor-compressors and test methods | |
404 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-5-2012 | Automatic electrical controls for household and similar use. Part 2-5. Supplementary requirements for automatic electrical burner control devices | |
405 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-6-2014 | Automatic electrical controls for household and similar use. Part 2-6. Particular requirements for automatic electrical controls, pressure sensors, including requirements for mechanical characteristics | |
406 |
paragraphs | GOST IEC 60730-2-7-2011 | Automatic electrical controls for household and similar use. Part 2-7. Particular requirements for timers and time switches |
407 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-8-2012 | Automatic electrical controls for household and similar use. Part 2-8. Supplementary requirements for electrically operated water valves, including requirements for mechanical characteristics | |
408 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-9-2011 | Automatic electrical controls for household and similar use. Part 2-9. Particular requirements for temperature sensing controls and test methods | |
409 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-10-2013 | Automatic electrical controls for household and similar use. Part 2-10. Particular requirements for motor-starting relays | |
410 |
paragraphs first – third, sixth, eighth, |
GOST 32128.2.11-2013 | Automatic electrical controls for household and similar use. Part 2-11. Particular requirements for energy regulators | |
411 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-12-2012 | Automatic electrical controls for household and similar use. Part 2-12. Supplementary requirements for electrically operated door locks | |
412 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-13-2015 | Automatic electrical controls for household and similar use. Part 2-13. Particular requirements for humidity sensing controls | |
413 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-14-2012 | Automatic electrical controls for household and similar use. Part 2-14. Supplementary requirements for electric power actuators | |
414 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-15-2013 | Automatic electrical controls for household and similar use. Part 2-15. Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
415 |
GOST R 53994.2.15-2011 | Automatic electrical controls for household and similar use. Part 2.15. Particular requirements for automatic electrical air flow, water flow and water level sensing controls | applies until 01.06.2017 | |
416 |
paragraphs first – third, sixth, eighth, | GOST IEC 60730-2-19-2012 | Automatic electrical controls for household and similar use. Part 2-19. Particular requirements for electrically operated oil valves, including mechanical requirements | |
417 |
paragraphs | GOST IEC 60745-1-2011 | Hand-held electric machinery. Safety and test methods. Part 1. General requirements | |
418 | GOST R IEC 60745-1-2009 | Hand-held electric machinery. Safety and test methods. Part 1. General requirements | ||
419 | STB IEC 60745-1-2012 | Hand-held motor-operated electric tools. Safety. Part 1. General requirements | ||
420 |
paragraphs | GOST IEC 60745-2-1-2014 | Hand-held electric machinery. Safety and test methods. Part 2-1. Particular requirements for drills and impact drills | |
421 | GOST IEC 60745-2-1-2011 | Hand-held electric machinery. Safety and test methods. Part 2-1. Particular requirements for drills and impact drills | applies until 01.06.2017 | |
422 |
paragraphs | GOST IEC 60745-2-2-2011 | Hand-held electric machinery. Safety and test methods. Part 2-2. Particular requirements for screwdrivers and impact wrenches | |
423 |
paragraphs | GOST R IEC 60745-2-3-2011 | Hand-held electric machinery. Safety and test methods. Part 2-3. Particular requirements for grinders, disc-type sanders and polishers with rotary motion of the working tool | |
No. |
Elements | Standard designation | Standard title | Note |
424 |
paragraphs | GOST IEC 60745-2-4-2011 | Hand-held electric machinery. Safety and test methods. Part 2-4. Particular requirements for flat sanders and belt sanders | |
425 |
paragraphs | GOST IEC 60745-2-5-2014 | Hand-held electric machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | |
426 | GOST IEC 60745-2-5-2011 | Hand-held electric machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | applies until 01.06.2017 | |
427 |
paragraphs | GOST IEC 60745-2-6-2014 | Hand-held electric machinery. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers | |
428 | GOST IEC 60745-2-6-2011 | Hand-held electric machinery. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers | applies until 01.06.2017 | |
429 |
paragraphs | GOST 30700-2000 (IEC 745-2-7-89) | Hand-held electric machinery. Particular safety requirements and test methods for spray guns for non-flammable liquids | |
430 |
paragraphs | GOST IEC 60745-2-8-2011 | Hand-held electric machinery. Safety and test methods. Part 2-8. Particular requirements for sheet metal shears | |
431 |
paragraphs | GOST IEC 60745-2-9-2011 | Hand-held electric machinery. Safety and test methods. Part 2-9. Particular requirements for internal thread tappers | |
432 |
paragraphs | GOST IEC 60745-2-11-2014 | Hand-held electric machinery. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jigsaws and hacksaws) | |
433 |
paragraphs | GOST IEC 60745-2-12-2013 | Hand-held electric machinery. Safety and test methods. Part 2-12. Particular requirements for vibrators for compacting concrete mix | |
434 | GOST R IEC 60745-2-12-2011 | Hand-held electric machinery. Safety and test methods. Part 2-12. Particular requirements for concrete vibrators | applies until 01.06.2017 | |
435 |
paragraphs |
GOST 30506-97 | Hand-held electric machinery. Particular safety requirements and test methods for chain saws | |
436 | GOST R IEC 60745-2-13-2012 | Hand-held electric machinery. Safety and test methods. Part 2-13. Particular requirements for chain saws | ||
437 |
paragraphs | GOST IEC 60745-2-14-2014 | Hand-held electric machinery. Safety and test methods. Part 2-14. Particular requirements for planers | |
438 | GOST IEC 60745-2-14-2011 | Hand-held electric machinery. Safety and test methods. Part 2-14. Particular requirements for planers | applies until 01.04.2017 | |
439 |
paragraphs |
GOST 30505-97 | Hand-held electric machinery. Particular safety requirements and test methods for hedge trimmers and grass shears | |
440 | GOST R IEC 60745-2-15-2012 | Hand-held electric machinery. Safety and test methods. Part 2-15. Particular requirements for hedge trimmers | ||
441 |
paragraphs |
GOST 30701-2001 | Hand-held electric machinery. Particular safety requirements and test methods for tackers | |
442 | GOST R IEC 60745-2-16-2012 | Hand-held electric machinery. Safety and test methods. Part 2-16. Particular requirements for tackers | ||
443 |
paragraphs | GOST IEC 60745-2-17-2014 | Hand-held electric machinery. Safety and test methods. Part 2-17. Particular requirements for hand-held routers and edge trimmers | |
444 | GOST R IEC 60745-2-17-2010 | Hand-held electric machinery. Safety and test methods. Part 2-17. Particular requirements for hand-held routers and edge trimmers | applies until 01.04.2017 | |
445 |
paragraphs | GOST IEC 60745-2-18-2014 | Hand-held electric machinery. Safety and test methods. Part 2-19. Particular requirements for strapping tools | |
446 |
paragraphs | GOST IEC 60745-2-19-2014 | Hand-held electric machinery. Safety and test methods. Part 2-19. Particular requirements for jointers | |
447 |
paragraphs | GOST R IEC 60745-2-20-2011 | Hand-held electric machinery. Safety and test methods. Part 2-20. Particular requirements for band saws | |
448 |
paragraphs | GOST IEC 60745-2-21-2014 | Hand-held electric machinery. Safety and test methods. Part 2-21. Particular requirements for drain cleaners | |
449 | paragraphs | GOST IEC | Hand-held electric machinery. Safety and methods | |
first – fourth and | 60745-2-22-2014 | of testing. Part 2-22. Particular requirements for cut-off machines | ||
450 | paragraphs | GOST IEC | Electrical accessories. Cord sets and cords | |
first, fourth | 60799-2011 | for interconnection | ||
451 | Article 4 | GOST R IEC 60800-2012 | Heating cables with a rated voltage of 300/500 V for space heating and prevention of ice formation | |
452 | paragraphs | GOST IEC | Safety of laser equipment. Part 1. Classification | |
first – third, fifth and twelfth | 60825-1-2013 | of equipment, requirements and user's guide | ||
453 | STB IEC | Safety of laser products. Part 1. Classification | applies | |
of Article 4, Article 5 | 60825-1-2011 | of equipment and requirements | until 01.06.2017 | |
454 | paragraphs | GOST IEC | Safety of laser equipment. Part 2. Safety | |
first, fifth, | 60825-2-2013 | of optical fibre communication systems | ||
455 | twelfth paragraph | GOST IEC | Safety of laser equipment. Part 4. Means of protection against | |
of Article 4, Article 5 | 60825-4-2014 | laser radiation | ||
456 | paragraphs | GOST IEC | Safety of laser equipment. Part 12. Safety | |
first, fifth, | 60825-12-2013 | of free space optical communication systems used for transmission of information | ||
457 | paragraphs first, | GOST IEC | Miscellaneous lampholders. Part 1. General requirements | |
third, sixth, | 60838-1-2011 | and test methods | ||
458 |
paragraphs first, | GOST IEC 60838-2-1-2014 | Miscellaneous lampholders. Part 2-1. Particular requirements for S14 lampholders | |
459 |
paragraphs first, | GOST IEC 60838-2-2-2013 | Lampholders of various types. Part 2-2. Supplementary requirements. Connectors for light-emitting diode modules | |
460 | GOST R IEC 60838-2-2-2011 | Miscellaneous lampholders. Part 2-2. Particular requirements. Connectors for LED modules | applies until 01.06.2017 | |
461 |
paragraphs first, | GOST IEC 60884-1-2013 | Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and test methods | |
462 |
paragraphs first, |
GOST 30988.2.2-2012 | Plugs and socket-outlets for household and similar purposes. Part 2. Supplementary requirements for socket-outlets for appliances and test methods | |
463 |
paragraphs first, |
GOST 30988.2.5-2003 | Plugs and socket-outlets for household and similar purposes. Part 2. Supplementary requirements for adaptors and test methods | |
464 |
paragraphs first, |
GOST 30988.2.6-2012 | Plugs and socket-outlets for household and similar purposes. Part 2-6. Supplementary requirements for switched socket-outlets with interlock for fixed electrical installations and test methods | |
465 |
paragraphs first, | GOST IEC 60884-2-7-2013 | Plugs and socket-outlets for household and similar purposes. Part 2-7. Additional requirements for cord extension sets | |
466 |
paragraphs |
GOST R | Small-sized electrical equipment. Circuit-breakers for overcurrent protection for household and similar purposes. Part 1. Circuit-breakers for alternating current | |
467 |
paragraphs | GOST IEC 60898-2-2011 | Circuit-breakers for overcurrent protection of household and similar electrical installations. Part 2. Circuit-breakers for alternating and direct current | |
468 |
paragraphs first, | GOST IEC 60931-1-2013 | Shunt power capacitors of the non-self-healing type for alternating current systems having a rated voltage up to and including 1000 V. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation | |
469 | paragraphs | GOST IEC | Shunt power capacitors | |
first and sixth of Article 4 | 60931-2-2013 | of the non-self-healing type for systems with alternating current and a rated voltage up to 1000 V (inclusive). Part 2. Ageing test and destruction test | ||
470 | paragraphs | GOST IEC | Shunt power capacitors | |
first, sixth | 60931-3-2013 | of the non-self-healing type for alternating current systems with a rated voltage up to and including 1000 V. Part 3. Internal fuses | ||
471 |
paragraphs | GOST IEC 60934-2015 | Circuit-breakers for equipment (CBE) | |
472 | GOST R | Circuit-breakers for electrical equipment (CBE) | applicable | |
tenth | 50031-2012 (IEC 60934:2007) | until 01.06.2017 | ||
473 | paragraphs | GOST IEC | Low-voltage switchgear and controlgear. Part 1. | |
first to third, sixth to eighth, | 60947-1-2014 | General rules | ||
474 | GOST | Low-voltage switchgear and controlgear. Part 1. | applicable | |
tenth |
30011.1-2012 | General requirements | until 01.06.2017 | |
475 | paragraphs | GOST IEC | Low-voltage switchgear and controlgear. Part 2. | |
first to third, sixth to eighth, | 60947-2-2014 | Circuit-breakers | ||
476 | GOST R | Low-voltage switchgear and controlgear. Part 2. | applicable | |
tenth |
50030.2-2010 | Circuit-breakers | until 01.06.2017 |
477 | ST RK IEC | Low-voltage switchgear and controlgear. Part 2. | applies | |
60947-2-2012 | Circuit-breakers | until 01.06.2017 | ||
478 |
paragraphs |
GOST 30011.3-2002 | Low-voltage switchgear and controlgear. Part 3. Switches, disconnectors, switch-disconnectors and their combinations with fuses | |
479 |
GOST R 50030.3-2012 | Low-voltage switchgear and controlgear. Part 3. Switches, disconnectors, switch-disconnectors and their combinations with fuses | ||
480 | ST RK IEC 60947-3-2011 | Low-voltage complete switchgear and control mechanisms. Part 3. Switches, disconnectors, switch-disconnectors and fuse units | ||
481 |
paragraphs | GOST IEC 60947-4-1-2015 | Low-voltage complete switchgear and control mechanisms. Part 4-1. Contactors and motor starters. Electromechanical contactors and motor starters | |
482 |
GOST R 50030.4.1-2012 | Low-voltage switchgear and controlgear. Part 4. Contactors and starters. Section 1. Electromechanical contactors and starters | applies until 01.06.2017 | |
483 | ST RK IEC 60947-4-1-2011 | Low-voltage switchgear and controlgear. Part 4-1. Contactors and starters. Electromechanical contactors and motor starters | applies until 01.06.2017 | |
484 |
paragraphs |
GOST R 50030.4.2-2012 | Low-voltage switchgear and controlgear. Part 4. Contactors and starters. Section 2. Semiconductor controllers and starters for alternating current circuits | |
485 |
paragraphs | GOST IEC 60947-5-1-2014 | Low-voltage switchgear and controlgear. Part 5-1. Control circuit devices and switching elements. Electromechanical control circuit devices | |
486 |
GOST 30011.5.1-2012 | Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Chapter 1. Electromechanical control circuit devices | applies until 01.06.2017 | |
487 | STB IEC 60947-5-1-2012 | Low-voltage switchgear and controlgear. Part 5-1. Devices in secondary switching circuits and switching elements. Electromechanical devices in secondary switching circuits | applies until 01.06.2017 | |
488 |
paragraphs | GOST IEC 60947-5-2-2012 | Low-voltage switchgear and controlgear. Part 5-2. Control circuit devices and switching elements. Proximity sensors | |
489 |
GOST R 50030.5.2-99 | Low-voltage switchgear and controlgear. Part 5-2. Control circuit devices and switching elements. Proximity sensors | applies until 01.06.2017 | |
490 |
paragraphs | GOST IEC 60947-5-3-2014 | Low-voltage switchgear and controlgear. Part 5-3. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions | |
491 |
paragraphs |
GOST 30011.5.5-2012 | Low-voltage switchgear and controlgear. Part 5-5. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function | |
492 |
paragraphs | GOST 30011.6.1-2012 | Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 1. Automatic transfer switching equipment | |
493 | STB IEC 60947-6-1-2012 | Low-voltage switchgear and controlgear. Part 6-1. Multiple function equipment. Transfer switching equipment | ||
494 |
GOST R 50030.6.1-2010 | Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 1. Transfer switching equipment | ||
495 |
paragraphs | GOST IEC 60947-6-2-2013 | Low-voltage switchgear and controlgear. Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) | |
496 |
GOST R 50030.6.2-2011 | Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 2. Control and protective switching devices (or equipment) (CPS) | applies until 01.06.2017 | |
497 |
paragraphs |
GOST 30011.7.1-2012 | Low-voltage switchgear and controlgear. Part 7. Ancillary electrical equipment. Section 1. Terminal blocks for copper conductors | |
498 | paragraphs | GOST | Low-voltage switchgear and controlgear. Part 7. | |
first to fourth, | 30011.7.2-2012 | Ancillary electrical equipment. Section 2. Terminal | ||
sixth to tenth | (IEC | blocks for protective conductors for connecting copper | ||
and twelfth of Article 4, Article 5 | 60947-7-2:2002) | conductors | ||
499 | paragraphs | GOST R | Low-voltage switchgear and controlgear. | |
first to fourth, | 50030.7.3-2009 | Part 7.3. Ancillary electrical equipment. Requirements | ||
sixth to tenth | (IEC 60947-7-3:2002) | for safety of fuse terminal blocks | ||
500 | paragraphs | GOST IEC | Switchgear and control mechanisms | |
first to fourth, sixth to tenth | 60947-7-4-2015 | low-voltage, complete. Part 7-4. Ancillary equipment. PCB terminal blocks for copper conductors | ||
501 | paragraphs | GOST IEC | Low-voltage switchgear and controlgear. Part 8. | |
first to fourth, sixth to tenth | 60947-8-2015 | Control units for built-in thermal protection (PTC) for rotating electrical machines | ||
502 | paragraphs | GOST IEC | Information technology equipment. Requirements | |
first to fourth and sixth to twelfth | 60950-1-2014 | for safety. Part 1. General requirements | ||
503 | GOST IEC | Information technology equipment. Requirements | applies | |
of Article 4, Article 5 | 60950-1-2011 | for safety. Part 1. General requirements | until 01.06.2017 | |
504 | СТБ МЭК | Information technology equipment. Safety. | applies | |
60950-1-2003 | Part 1. General requirements | until 01.06.2017 | ||
505 | paragraphs | ГОСТ IEC | Information technology equipment. Requirements | |
one, two | 60950-21-2013 | for safety. Part 21. Remote power feeding | ||
506 |
paragraphs | ГОСТ IEC 60950-22-2013 | Information technology equipment. Safety requirements. Part 22. Equipment intended for outdoor installation | |
507 |
paragraphs | ГОСТ Р МЭК 60950-23-2011 | Information technology equipment. Safety requirements. Part 23. Large data storage equipment | |
508 |
paragraphs | ГОСТ 31999-2012 (IEC 60968:1988) | Lamps with integral ballasts for general lighting. Safety requirements | |
509 | СТБ IEC 60968-2008 | Lamps with integral ballasts for general lighting. Safety requirements | applies until 01.06.2017 | |
510 |
paragraphs | ГОСТ Р МЭК 60974-1-2012 | Arc welding equipment. Part 1. Welding power sources | |
511 |
paragraphs | ГОСТ IEC 60974-2-2014 | Arc welding equipment. Part 2. Liquid cooling systems | |
512 |
paragraphs | ГОСТ IEC 60974-3-2014 | Arc welding equipment. Part 3. Arc striking and stabilizing devices | |
513 |
paragraphs | ГОСТ IEC 60974-5-2014 | Arc welding equipment. Part 5. Wire feed mechanism | |
514 |
paragraphs | ГОСТ IEC 60974-7-2015 | Arc welding equipment. Part 7. Torches | |
515 | СТ РК МЭК 60974-7-2011 | Arc welding equipment. Part 7. Torches | applies until 01.06.2017 | |
516 |
paragraphs | ГОСТ IEC 60974-8-2014 | Arc welding equipment. Part 8. Gas consoles for welding and plasma cutting systems | |
517 |
paragraphs | ГОСТ IEC 60974-11-2014 | Arc welding equipment. Part 11. Electrode holders | |
518 |
paragraphs | ГОСТ IEC 60974-12-2014 | Arc welding equipment. Part 12. Coupling devices for welding cables | |
519 |
paragraphs |
ГОСТ 31195.1-2012 | Connecting devices for low-voltage circuits for household and similar purposes. Part 1. General requirements | |
520 |
paragraphs | ГОСТ IEC 60998-2-1-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-1. Additional requirements for connecting devices with screw-type clamping units used as separate units | |
521 |
paragraphs | ГОСТ IEC 60998-2-2-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-2. Additional requirements for connecting devices with screwless clamping units used as separate units | |
522 |
paragraphs |
ГОСТ 31195.2.3-2012 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-3. Additional requirements for clamping units that pierce the insulation of copper conductors to connect them | |
523 |
paragraphs | ГОСТ IEC 60998-2-4-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-4. Additional requirements for twist-on connecting devices | |
524 |
paragraphs |
ГОСТ 31602.1-2012 | Connecting devices. Safety requirements for clamping units. Part 1. Requirements for screw-type and screwless clamping units for connecting copper conductors with a rated cross-section from 0,2 to 35 mm2 | |
525 |
paragraphs |
ГОСТ 31602.2-2012 | Connecting devices. Safety requirements for clamping units. Part 2. Additional requirements for screw-type and screwless clamping units for connecting copper conductors with a rated cross-section from 35 to 300 mm2 | |
526 |
paragraphs | ГОСТ IEC 61008-1-2012 | Residual current operated circuit breakers for household and similar use without integral overcurrent protection. Part 1. General requirements and test methods | |
527 |
ГОСТ Р | Residual current operated circuit breakers for household and similar use without integral overcurrent protection. Part 1. General requirements and test methods | applies until 01.06.2017 | |
528 | paragraphs | ГОСТ | Automatic circuit breakers operated by residual | |
one – four and | 31601.2.1-2012 | current, for household and similar use, without integral | ||
six – twelve | (IEC | overcurrent protection. Part 2-1. Applicability of the general rules | ||
of Article 4, Article 5 | 61008-2-1:1990) | to RCCBs functionally independent of line voltage | ||
529 | paragraphs | ГОСТ IEC | Automatic circuit breakers operated by residual | |
one – four and | 61009-1-2014 | current, with integral overload current protection, for household and similar use. Part 1. General rules | ||
530 | ГОСТ Р | Automatic circuit breakers operated by residual | applies | |
51327.1-2010 | current, for household and similar use, with integral overcurrent protection. Part 1. General requirements and test methods | until 01.06.2017 | ||
531 | paragraphs | ГОСТ | Automatic circuit breakers operated by residual | |
one – four and | 31225.2.1-2012 | current, for household and similar use, with integral | ||
six – twelve | (IEC | overcurrent protection. Part 2-1. Applicability of the general rules | ||
of Article 4, Article 5 | 61009-2-1:1991) | to RCBOs functionally independent of line voltage | ||
532 | paragraphs | ГОСТ IEC | Safety of electrical control and measuring instruments | |
first – fourth and sixth – twelfth | 61010-1-2014 | and laboratory equipment. Part 1. General requirements | ||
533 | GOST | Safety of electrical equipment for measurement, | applies | |
of Article 4, Article 5 |
12.2.091-2012 | control and laboratory use. Part 1. General requirements | until 01.06.2017 | |
534 | GOST | Safety of electrical control and measuring instruments | applies | |
12.2.091-2002 | and laboratory equipment. Part 1. General requirements | until 01.06.2017 | ||
535 | paragraphs | GOST IEC | Safety of electrical control and measuring instruments | |
first – fourth and | 61010-2-010-2013 | and laboratory equipment. Part 2-010. Particular requirements for laboratory equipment for the heating of materials | ||
536 |
paragraphs | GOST IEC 61010-2-020-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-020. Particular requirements for laboratory centrifuges | |
537 |
paragraphs | GOST IEC 61010-2-030-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-030. Particular requirements for testing and measuring circuits | |
538 |
paragraphs | GOST IEC 61010-2-032-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-032. Particular requirements for hand-held and hand-manipulated current sensors for electrical testing and measurement | |
539 | GOST IEC 61010-2-032-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-032. Particular requirements for hand-held current clamps for electrical measurement and testing | applies until 01.06.2017 | |
540 |
paragraphs | GOST IEC 61010-2-033-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-033. Particular requirements for portable multimeters and other measuring instruments for household and professional use capable of measuring mains voltage |
541 |
paragraphs | GOST IEC 61010-2-051-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-051. Particular requirements for laboratory equipment for mixing and shaking | |
542 | GOST IEC 61010-2-051-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-051. Particular requirements for laboratory equipment for mixing and shaking | applies until 01.06.2017 | |
543 |
paragraphs | GOST IEC 61010-2-061-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
544 | GOST IEC 61010-2-061-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | applies until 01.06.2017 | |
545 |
paragraphs | GOST IEC 61010-2-081-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
546 |
paragraphs | GOST IEC 61010-031-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 031. Safety requirements for portable measuring probes for electrical measurement and testing | |
547 | GOST IEC 61010-031-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 031. Particular requirements for hand-held electrical probes for electrical measurement and testing | applies until 01.06.2017 | |
548 |
paragraphs | GOST IEC 61029-1-2012 | Portable electric machinery. General safety requirements and test methods | |
549 |
paragraphs | GOST IEC 61029-2-1-2011 | Portable electric machinery. Particular safety requirements and test methods for circular saws | |
550 |
paragraphs | GOST IEC 61029-2-2-2011 | Portable electric machinery. Particular safety requirements and test methods for radial arm saws | |
551 |
paragraphs | GOST IEC 61029-2-3-2011 | Portable electric machinery. Particular safety requirements and test methods for planers and thicknessers | |
552 |
paragraphs | GOST IEC 61029-2-4-2012 | Portable electric machinery. Particular safety requirements and test methods for bench grinders | |
553 | GOST R IEC 1029-2-4-96 | Portable electric machinery. Particular safety requirements and test methods for bench grinders | applies until 01.06.2017 | |
554 |
paragraphs | GOST IEC 61029-2-5-2011 | Portable electric machinery. Particular safety requirements and test methods for band saws | |
555 |
paragraphs | GOST IEC 61029-2-6-2011 | Portable electric machinery. Particular safety requirements and test methods for diamond drilling machines with water supply | |
556 |
paragraphs | GOST IEC 61029-2-7-2011 | Portable electric machinery. Particular safety requirements and test methods for diamond saws with water supply | |
557 |
paragraphs | GOST IEC 61029-2-8-2011 | Portable electric machinery. Particular safety requirements and test methods for single-spindle vertical moulding machines | |
558 |
paragraphs | GOST IEC 61029-2-9-2012 | Portable electric machinery. Particular safety requirements and test methods for mitre saws | |
559 | GOST R IEC 1029-2-9-99 | Portable electric machinery. Particular safety requirements and test methods for mitre saws | applies until 01.06.2017 | |
560 |
paragraphs | GOST IEC 61029-2-10-2013 | Portable electric machinery. Particular safety requirements and test methods for cutting-off grinders | |
561 |
paragraphs | GOST IEC 61029-2-12-2014 | Portable electric machinery. Part 2-12. Particular safety requirements and test methods for external threading machines | |
562 |
paragraphs | GOST IEC 61048-2011 | Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General requirements and safety requirements | |
563 |
paragraphs | GOST IEC 61050-2011 | Transformers for tubular discharge lamps having a no-load voltage exceeding 1000 V (formerly called "Neon transformers"). General requirements and safety requirements | |
564 |
paragraphs | GOST IEC 61058-1-2012 | Switches for appliances. Part 1. General requirements | |
565 | STB IEC 61058-1-2009 | Switches for appliances. Part 1. General requirements | applies until 01.06.2017 | |
566 | GOST R IEC 61058.1-2000 | Switches for appliances. Part 1. General requirements and test methods | applies until 01.06.2017 | |
567 |
paragraphs | GOST IEC 61058-2-1-2013 | Switches for electrical household appliances. Part 2-1. Additional requirements for cord switches | |
568 |
paragraphs | GOST IEC 61058-2-4-2012 | Switches for electrical household appliances. Part 2-4. Additional requirements for independently mounted switches | |
569 |
paragraphs | GOST IEC 61058-2-5-2012 | Switches for appliances. Part 2-5. Additional requirements for pole-changing switches | |
570 |
paragraphs | GOST IEC 61071-2014 | Power electronic capacitors | |
571 |
paragraphs | GOST 31637-2012 | Electromechanical contactors for household and similar use | |
572 |
GOST R | Electromechanical contactors for household and similar purposes | ||
573 |
paragraphs | GOST IEC 61131-2-2012 | Programmable controllers. Part 2. Equipment requirements and tests | |
574 | STB IEC 61131-2-2010 | Programmable controllers. Part 2. Equipment requirements and tests | applies until 01.06.2017 | |
575 |
paragraphs | GOST IEC 61140-2012 | Protection against electric shock. General safety provisions for installations and equipment | |
576 | twelfth paragraph of Article 4, Article 5 |
GOST R | Metal halide lamps. Performance requirements | |
577 |
paragraphs | GOST IEC 61184-2011 | Bayonet lampholders | |
578 |
paragraphs | GOST R 51288-99 (IEC 187-93) | Measuring instruments for electrical and magnetic quantities. Operational documents | |
579 |
paragraphs | GOST IEC 61195-2012 | Double-capped fluorescent lamps. Safety requirements | |
580 | STB IEC 61195-2001 | Double-capped fluorescent lamps. Safety requirements | applies until 01.06.2017 | |
581 |
paragraphs | GOST IEC 61199-2011 | Single-capped fluorescent lamps. Safety requirements | |
582 | STB IEC 61199-2006 | Single-capped fluorescent lamps. Safety requirements | applies until 01.06.2017 | |
583 | paragraphs | GOST IEC | Low-voltage DC power supplies. Performance | |
first, fifth | 61204-2013 | characteristics | ||
584 | paragraphs | GOST IEC | Low-voltage DC power supplies. Part 7. | |
first – fourth and | 61204-7-2014 | Safety requirements | ||
585 | paragraphs | GOST IEC | Connecting devices. Flat terminals | |
first, third | 61210-2011 | of quick-connect type for copper electrical conductors. Safety requirements | ||
586 | paragraphs | GOST IEC | Live working. Portable | |
first, fifth and | 61230-2012 | equipment for earthing or earthing and short-circuiting | ||
587 | paragraphs | GOST 31223-2012 | Extension cords for household and similar purposes on cable | |
first – fourth and | (IEC 61242:1995) | reels. General requirements and test methods | ||
588 | paragraphs | GOST IEC | Live working. Voltage detectors. Part 3. | |
first – fourth and | 61243-3-2014 | Two-pole type low-voltage detectors | ||
589 |
paragraphs | GOST IEC 61270-1-2013 | Capacitors for microwave ovens. Part 1. General | |
590 | twelfth paragraph of Article 4, Article 5 | GOST R IEC 61293-2000 | Electrical equipment. Marking with power supply ratings and characteristics. Safety requirements | |
591 |
paragraphs | STB IEC 61310-1-2005 | Safety of machinery. Indication, marking and actuation. Part 1. Requirements for visual, acoustic and tactile signals | |
592 | ST RK IEC 61310-1-2008 | Safety of machinery. Indication, marking and actuation. Part 1. Requirements for visual, acoustic and tactile signals | ||
593 | twelfth paragraph of Article 4, Article 5 | STB IEC 61310-2-2005 | Safety of machinery. Indication, marking and actuation. Part 2. Requirements for marking | |
594 | ST RK IEC 61310-2-2008 | Safety of machinery. Indication, marking and actuation. Part 2. Requirement for marking | ||
595 | twelfth paragraph of Article 4, Article 5 | STB IEC 61310-3-2005 | Safety of machinery. Indication, marking and actuation. Part 3. Requirements for the location and operation of actuators | |
596 |
paragraphs | GOST R IEC 61347-1-2011 | Lamp control gear. Part 1. General and safety requirements | |
597 | STB IEC 61347-1-2008 | Lamp controlgear. Part 1. General and safety requirements | ||
598 |
ST RK IEC | Lamp control equipment. Part 1. General and safety requirements | ||
599 |
paragraphs | GOST IEC 61347-2-2-2014 | Lamp controlgear. Part 2-2. Supplementary requirements for DC or AC supplied electronic step-down converters for incandescent lamps | |
600 |
paragraphs | GOST R IEC 61347-2-3-2011 | Control gear for lamps. Part 2-3. Particular requirements for AC supplied electronic ballasts for tubular fluorescent lamps | |
601 |
paragraphs | GOST IEC 61347-2-7-2014 | Lamp control gear. Part 2-7. Particular requirements for battery-supplied electronic ballasts used for emergency lighting (self-contained) | |
602 |
paragraphs | GOST R IEC 61347-2-8-2011 | Lamp control gear. Part 2-8. Particular requirements for ballasts for fluorescent lamps | |
603 |
paragraphs | GOST IEC 61347-2-9-2014 | Lamp control gear. Part 2-9. Particular requirements for electromagnetic ballasts for discharge lamps (excluding fluorescent lamps) | |
604 |
paragraphs | GOST IEC 61347-2-10-2014 | Lamp controlgear. Part 2-10. Supplementary requirements for electronic inverters and converters for high-frequency operation of cold-start tubular gas-discharge lamps (neon lamps) | |
605 |
paragraphs | GOST IEC 61347-2-11-2014 | Lamp controlgear. Part 2-11. Supplementary requirements for auxiliary electronic circuits for luminaires | |
606 |
paragraphs | GOST IEC 61347-2-12-2015 | Lamp controlgear. Part 2-12. Supplementary requirements for DC or AC supplied electronic ballasts for gas-discharge lamps (excluding fluorescent lamps) | |
607 |
paragraphs | GOST IEC 61347-2-13-2013 | Lamp controlgear. Part 2-13. Additional requirements for DC or AC supplied electronic controlgear for LED modules | |
608 | GOST R IEC 61347-2-13-2011 | Lamp control gear. Part 2-13. Particular requirements for DC or AC supplied electronic control gear for LED modules | applies until 01.06.2017 | |
609 |
paragraphs | GOST IEC 61439-1-2013 | Low-voltage switchgear and controlgear assemblies. Part 1. General requirements | |
610 |
paragraphs | GOST IEC 61439-2-2015 | Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies | |
611 |
paragraphs | GOST IEC 61439-5-2013 | Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for power distribution in public networks | |
612 |
paragraphs | GOST IEC 61535-2015 | Installation couplers intended for permanent connection in fixed installations | |
613 |
paragraphs first, |
GOST R | Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods | |
614 |
paragraphs | GOST IEC 61549-2012 | Miscellaneous lamps. Technical requirements | |
615 |
paragraphs first, |
GOST R 54127-1-2010 | Low-voltage electrical distribution networks up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements | |
616 |
paragraphs | GOST IEC 61557-2-2013 | Low-voltage electrical distribution networks up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance | |
617 |
GOST R 54127-2-2011 | Low-voltage electrical distribution networks up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance | applies until 01.06.2017 |
618 |
paragraphs one, | GOST IEC 61557-3-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance | |
619 |
GOST R 54127-3-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance | applies until 01.06.2017 | |
620 |
paragraphs one, | GOST IEC 61557-4-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding | |
621 |
GOST R 54127-4-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding | applies until 01.06.2017 | |
622 |
paragraphs one, | GOST IEC 61557-5-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance of earth electrode to earth | |
623 |
GOST R 54127-5-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance of earth electrode to earth | applies until 01.06.2017 | |
624 |
paragraphs one, | GOST IEC 61557-6-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current devices (RCDs) in TT and TN systems | |
625 |
GOST R 54127-6-2012 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current devices (RCDs) in TT, TN and IT systems | applies until 01.06.2017 | |
626 |
paragraphs one, | GOST IEC 61557-7-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence | |
627 |
GOST R | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence | applies until 01.06.2017 | |
628 |
paragraphs one, | GOST IEC 61557-8-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 8. Insulation monitoring devices in IT systems | |
629 |
paragraphs one, | GOST IEC 61557-9-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 9. Equipment for insulation fault location in IT systems | |
630 |
paragraphs one, | GOST IEC 61557-10-2015 | Electrical safety in low-voltage distribution systems up to 1000 V AC 1500 V DC. Equipment for testing, measuring or monitoring of protective devices. Part 10. Combined measuring equipment for testing, measuring or monitoring of protective devices | |
631 |
paragraphs one, | GOST IEC 61557-11-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 11. Effectiveness of residual current monitors (RCMs) of type A and type B in TT, TN and IT systems | |
632 |
paragraphs one, | GOST IEC 61557-12-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 12. Performance measuring and monitoring devices (PMD) | |
633 |
paragraphs one, | GOST IEC 61557-13-2014 | Low-voltage electrical distribution networks up to 1000 V AC and 1500 V DC. Safety. Equipment for testing, measuring or monitoring of protective measures. Part 13. Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems | |
634 |
paragraphs | GOST IEC 61558-1-2012 | Safety of power transformers, power supplies, electrical reactors and similar products. Part 1. General requirements and test methods | |
635 |
paragraphs | GOST IEC 61558-2-1-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-1. Supplementary requirements and test methods for separating transformers and power supplies incorporating separating transformers for general applications | |
636 |
paragraphs | GOST IEC 61558-2-2-2015 | Safety of power transformers, power supply units, reactors and similar equipment. Part 2-2. Additional requirements and tests for control transformers and power supply units incorporating control transformers | |
637 |
paragraphs | GOST IEC 61558-2-3-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-3. Additional requirements and test methods for ignition transformers for gas and liquid-fuel burners | |
638 |
paragraphs | GOST IEC 61558-2-4-2015 | Safety of transformers, reactors, power supply units and similar equipment for supply voltages up to 1100 V. Part 2-4. Additional requirements and tests for isolating transformers and power supply units with isolating transformers | |
639 |
paragraphs | GOST IEC 61558-2-5-2013 | Safety of power transformers, power supply units and similar equipment. Part 2-5. Additional requirements for transformers and power supply units for electric shavers | |
640 |
paragraphs | GOST IEC 61558-2-6-2012 | Safety of transformers, electrical reactors, power supplies and similar products for supply voltages up to 1100 V. Part 2-6. Additional requirements and test methods for safety isolating transformers and power supplies with safety isolating transformers | |
641 |
paragraphs | GOST IEC 61558-2-7-2012 | Power transformers, power supply units, reactors and similar products. Safety. Part 2-7. Particular requirements for transformers and power supplies for toys | |
642 |
paragraphs | GOST IEC 61558-2-8-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-8. Additional requirements and test methods for transformers and power supply units for bells and audible signalling devices | |
643 |
paragraphs | GOST IEC 61558-2-9-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-9. Additional requirements and test methods for transformers and power supply units for class III portable luminaires with tungsten filament lamps | |
644 |
paragraphs | GOST IEC 61558-2-10-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-10. Additional requirements and test methods for separating transformers with a high insulation level and separating transformers with secondary voltages exceeding 1000 V | |
645 |
paragraphs | GOST IEC 61558-2-12-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-12. Additional requirements and test methods for transformers with stabilized secondary voltage and stabilized power supply units | |
646 |
paragraphs | GOST IEC 61558-2-13-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-13. Additional requirements and test methods for autotransformers and power supply units with autotransformers | |
647 |
paragraphs | GOST IEC 61558-2-14-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-14. Additional requirements and test methods for variable transformers and power supplies incorporating variable transformers | |
648 |
paragraphs | GOST IEC 61558-2-15-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-15. Additional requirements and test methods for isolating transformers for electrical networks of medical locations | |
649 |
paragraphs | GOST IEC 61558-2-16-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-16. Additional requirements and test methods for switch mode power supply units and transformers for switch mode power supply units | |
650 |
paragraphs | GOST IEC 61558-2-20-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-20. Additional requirements and test methods for low-power reactors | |
651 |
paragraphs | GOST IEC 61558-2-23-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-23. Additional requirements and test methods for transformers and power supply units for construction sites | |
652 |
paragraphs | GOST IEC 61643-11-2013 | Low-voltage surge protective devices. Part 11. Surge protective devices for low-voltage power systems | |
653 |
paragraphs | GOST IEC 61643-21-2014 | Low-voltage surge protective devices. Part 21. Surge protective devices connected to telecommunications and signalling networks. Performance requirements and test methods | |
654 |
paragraphs | GOST IEC 61770-2012 | Electrical appliances connected to the water mains. Prevention of backsiphonage and damage to connecting hoses. | |
655 | STB IEC 61770-2007 | Electrical appliances connected to the water mains. Prevention of backsiphonage and damage to connecting hoses | applies until 01.06.2017 | |
656 |
paragraphs | GOST R IEC 61730-1-2013 | Photovoltaic modules. Safety Assessment. Part 1. Requirements for construction | |
657 |
paragraphs | GOST IEC 61810-1-2013 | Electromechanical logic relays with non-specified operate time. Part 1. General requirements | |
658 |
paragraphs | GOST IEC 61812-1-2013 | Specified-time relays for industrial use. Part 1. Requirements and tests | |
659 |
paragraphs | STB IEC 61851-1-2008 | Electric vehicle conductive charging system. Part 1. General requirements | |
660 | GOST R IEC 61851-1-2013 | Electric vehicle conductive charging system. Part 1. General requirements | ||
661 |
paragraphs | STB IEC 61851-21-2007 | Electric vehicle conductive charging system. Part 21. Requirements for electric vehicles with regard to connection to an AC or DC power supply | |
662 |
paragraphs | GOST IEC 61869-1-2015 | Instrument transformers. Part 1. General requirements | |
663 |
paragraphs | GOST R IEC 61869-2-2015 | Instrument transformers. Part 2. Additional requirements for current transformers | |
664 | ST RK IEC 61869-2-2013 | Instrument transformers. Part 2. Additional requirements for current transformers | ||
665 |
paragraphs | GOST IEC 61869-3-2012 | Instrument transformers. Part 3. Additional requirements for inductive voltage transformers | |
666 |
paragraphs | GOST IEC 61921-2013 | Power capacitors. Capacitor banks for power factor correction at low voltage | |
667 |
paragraphs | GOST IEC 61995-1-2013 | Devices for the connection of luminaires for household and similar purposes. Part 1. General requirements | |
668 |
paragraphs | GOST IEC 62026-1-2015 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDI). Part 1. General rules | |
669 |
paragraphs | GOST IEC 62026-3-2015 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDI). Part 3. DeviceNet communication system | |
670 |
paragraphs | GOST IEC 62031-2011 | Light-emitting diode modules for general lighting. Safety requirements | |
671 | STB IEC 62031-2009 | Modules with light-emitting diodes for general lighting. Safety requirements | applies until 01.06.2017 | |
672 |
paragraphs | GOST 31948-2012 (IEC 62035:1999) | Discharge lamps (excluding fluorescent lamps). Safety requirements | |
673 | STB IEC 62035-2007 | Gas-discharge lamps (excluding fluorescent lamps). Safety requirements | ||
674 | paragraphs first – fourth and sixth – twelfth | GOST IEC 62040-1-2013 | Uninterruptible power systems (UPS). Part 1. General and safety requirements for uninterruptible power supply installations (UPS) | |
675 | of Article 4, Article 5 | ST RK IEC 62040-1-2011 | Uninterruptible power supplies (UPS). Part 1. General and safety requirements for UPS | applies until 01.06.2017 |
676 |
paragraphs | GOST IEC 62208-2013 | Enclosures for low-voltage switchgear and controlgear assemblies. General requirements | |
677 | GOST 32127-2013 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements | applies until 01.06.2017 | |
678 |
paragraphs fifth |
section 6 | Measurement methods for electromagnetic fields generated by household and similar electrical appliances with regard to human exposure | |
679 |
section 6 | Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement | applies until 01.06.2017 | |
680 |
paragraphs fifth | GOST IEC 62311-2013 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz) | |
681 |
paragraphs | GOST IEC 62368-1-2014 | Audio/video, information technology and communication technology equipment. Part 1. Safety requirements | |
682 |
paragraphs fifth | GOST IEC 62423-2013 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
683 |
paragraphs fifth | GOST IEC 62471-2013 | Photobiological safety of lamps and lamp systems | |
684 |
paragraphs fifth | GOST IEC 62479-2013 | Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz – 300 GHz) | |
685 |
paragraphs fifth | GOST IEC 62493-2014 | Assessment of lighting equipment related to human exposure to electromagnetic fields | |
686 |
paragraphs | GOST IEC 62552-2013 | Household refrigerating appliances. Technical requirements and test methods | |
687 |
paragraphs | STB IEC 62560-2011 | Lamps with light-emitting diodes with built-in ballasts for general lighting with supply voltages above 50 V. Safety requirements | |
688 | GOST R IEC 62560-2011 | LED lamps with built-in control gear for general lighting for voltages above 50 V. Safety requirements | ||
689 | Articles 4 and 5 | ST RK IEC 62821-1-2015 | Electric cables. Halogen-free, low-smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V. Part 1. General requirements | |
690 | Articles 4 and 5 | ST RK IEC 62821-3-2015 | Electric cables. Halogen-free, low-smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V. Part 3. Flexible cables (cords) | |
691 | Articles 4 and 5 | GOST IEC 62841-1-2014 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 1. General requirements | |
692 | Articles 4 and 5 | GOST IEC 62841-2-2-2015 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 2-2. Particular requirements for screwdrivers and impact wrenches | |
693 | Articles 4 and 5 | GOST IEC 62841-2-4-2015 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 2-4. Particular requirements for flat sanders and belt sanders | |
694 | Articles 4 and 5 | GOST IEC 62841-2-5-2015 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | |
695 | Articles 4 and 5 | GOST IEC 62841-3-1-2015 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 3-1. Particular requirements for circular saws | |
696 | Articles 4 and 5 | GOST IEC 62841-3-6-2015 | Electric hand-held, transportable and lawn and garden machinery. Safety and test methods. Part 3-6. Particular requirements for diamond drilling machines with a liquid system |
APPROVED
by Decision of the Customs Union Commission
No. 768 of 16 August 2011
LIST
of standards containing rules and methods of research (testing) and measurement, including sampling rules, necessary for the application and fulfilment of the requirements of the Technical Regulation of the Customs Union "On the Safety of Low‑Voltage Equipment" (TR CU 004/2011) and for the conformity assessment of objects of technical regulation
Footnote. The List as amended by Decision of the Board of the Eurasian Economic Commission No. 120 of 25.10.2016 (enters into force upon the expiry of 30 calendar days from the date of its official publication).
No. | Elements of the Technical Regulation of the Customs Union | Standard designation | Standard title | Note |
1 | 2 | 3 | 4 | 5 |
1 | Article 4 | GOST 12.1.044-89 (ISO 4589-84) | Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination | |
2 | Article 4 | sections 3 and 4 of GOST 433-73 | Rubber-insulated power cables. Specifications | |
3 | Article 4 | sections 3 and 4 of GOST 839-80 | Bare wires for overhead power transmission lines. Specifications | |
4 | Article 4 | sections 3 and 4 of GOST 1508-78 | Control cables with rubber and plastic insulation. Specifications | |
5 | Article 4 | sections 3 and 4 of GOST 2190-77 | Sapper wires. Specifications | |
6 | Article 4 | sections 3 and 4 of GOST 6285-74 | Wires for industrial blasting operations. Specifications | |
7 | Article 4 | sections 3 and 4 of GOST 7006-72 | Protective coverings of cables. Design and types, technical requirements and test methods | |
8 | Article 4 | sections 5 and 6 of GOST 7399-97 | Wires and cords for rated voltage up to 450/750 V. Specifications | |
9 | Article 4 | sections 3 and 4 of GOST 10348-80 | Multicore plastic-insulated installation cables. Specifications | |
10 | paragraphs one and eight of Article 4 | GOST 16962.1-89 | Electrical products. Test methods for resistance to climatic external influencing factors | |
11 |
paragraphs | GOST 16962.2-90 | Electrical products. Test methods for resistance to mechanical external influencing factors | |
12 | Article 4 | sections 3 and 4 of GOST 17515-72 | Plastic-insulated installation wires. Specifications | |
13 | Article 4 | sections 3 and 4 of GOST 18404.0-78 | Control cables. General specifications | |
14 | Article 4 | sections 3 and 4 of GOST 18404.1-73 | Control cables with fluoroplastic insulation in a reinforced rubber sheath. Specifications | |
15 | Article 4 | sections 3 and 4 of GOST 18404.2-73 | Control cables with polyethylene insulation in a rubber sheath. Specifications | |
16 | Article 4 | sections 3 and 4 of GOST 18404.3-73 | Control cables with polyethylene insulation in a polyvinyl chloride compound sheath. Specifications | |
17 | Article 4 | sections 3 and 4 of GOST 18410-73 | Power cables with impregnated paper insulation. Specifications | |
18 | Article 4 | sections 3 and 4 of GOST 24641-81 | Lead and aluminium cable sheaths. Specifications | |
19 | Article 4 | sections 4 and 5 of GOST 26411-85 | Control cables. General specifications | |
20 | Article 4 | sections 3 and 4 of GOST 26445-85 | Insulated power wires. General specifications | |
21 | Article 4 | section 4 of GOST 27179-86 | Household electric storage heaters. Safety requirements and test methods | |
22 | Article 4 | sections 5 and 6 of GOST 28244-96 | Wires and cords with fittings. Specifications | |
23 | Article 4 | GOST 20.57.406-81 | Integrated quality control system. Electronic, quantum electronic and electrical products. Test methods | |
24 | Article 4 | GOST 2933-93 | Low-voltage electrical apparatus. Test methods | |
25 | Article 4 | GOST 2990-78 | Cables, wires and cords. Voltage test methods | |
26 | Article 4 | GOST 3345-76 | Cables, wires and cords. Method for determining the electrical resistance of insulation | |
27 | Article 4 | GOST 7229-76 | Cables, wires and cords. Method for determining the electrical resistance of conductive cores and conductors | |
28 | Article 4 | GOST 10169-77 | Three-phase synchronous electrical machines. Test methods | |
29 | Article 4 | GOST 10446-80 (ISO 6892-84) | Wire. Tensile test method | |
30 | Article 4 | GOST 11262-80 | Plastics. Tensile test method | |
31 | Article 4 | GOST 12174-76 | Cables. Tensile test method for metal sheaths | |
32 | Article 4 | GOST 12177-79 | Cables, wires and cords. Methods for checking construction | |
33 | Article 4 | GOST 12182.0-80 | Cables, wires and cords. Methods for checking resistance to mechanical stresses. General requirements | |
34 | Article 4 | GOST 12182.1-80 | Cables, wires and cords. Methods for checking resistance to repeated bending over a system of pulleys | |
35 | Article 4 | GOST 12182.2-80 | Cables, wires and cords. Method for checking resistance to winding | |
36 | Article 4 | GOST 12182.3-80 | Cables, wires and cords. Methods for checking resistance to bending with axial torsion | |
37 | Article 4 | GOST 12182.4-80 | Cables, wires and cords. Method for checking resistance to rewinding | |
38 | Article 4 | GOST 12182.5-80 | Cables, wires and cords. Method for checking resistance to tension | |
39 | Article 4 | GOST 12182.6-80 | Cables, wires and cords. Method for checking resistance to crushing | |
40 | Article 4 | GOST 12182.7-80 | Cables, wires and cords. Method for checking resistance to axial torsion | |
41 | Article 4 | GOST 12182.8-80 | Cables, wires and cords. Method for checking resistance to bending | |
42 | Article 4 | GOST 16962.2-90 | Electrical products. Test methods for resistance to mechanical external influencing factors | |
43 | Article 4 | GOST 17491-80 | Cables, wires and cords with rubber and plastic insulation and sheath. Cold resistance test methods | |
44 | Article 4 | GOST 17492-72 | Flexible screened cables. Method for measuring the electrical resistance of screens | |
45 | Article 4 | GOST 22220-76 | Cables, wires and cords. Methods for determining the resistance of polyvinyl chloride plastic insulation and sheaths to cracking and deformation at elevated temperature | |
46 | Article 4 | GOST 24683-81 | Electrical products. Methods for testing resistance to special media | |
47 | Article 4 | GOST 25018-81 | Cables, wires and cords. Methods for determining the mechanical properties of insulation and sheath | |
48 | Article 4 | GOST 27893-88 | Communication cables. Test methods | |
49 | Article 4 | GOST 28249-93 | Short circuits in electrical installations. Calculation methods for AC electrical installations with voltage up to 1 kV | |
50 | Article 4 | sections 6 and 7 of GOST 31565-2012 | Cable products. Fire safety requirements | |
51 | Article 4 | sections 6 and 7 of GOST 31943-2012 | Telephone cables with polyethylene insulation in a plastic sheath. Specifications | |
52 | Article 4 | sections 6 and 7 of GOST 31944-2012 | Armoured load-carrying geophysical cables. General specifications | |
53 | Article 4 | sections 6 and 7 of GOST 31945-2012 | Flexible cables and cords for underground and open-pit mining. General specifications | |
54 | Article 4 | sections 7 and 8 of GOST 31946-2012 | Self-supporting insulated and covered wires for overhead power transmission lines. General specifications | |
55 | Article 4 | sections 7 and 8 of GOST 31947-2012 | Wires and cables for electrical installations for rated voltage up to and including 450/750 V. General specifications | |
56 | sections 6 and 7 of ST RK 2341-2013 | Stationary cross-connect wire with polyvinyl chloride compound insulation. Specifications | ||
57 | sections 6 and 7 of ST RK 2462-2014 | Flexible bare copper wires. Specifications | ||
58 | sections 6 and 7 of ST RK 2526-2014 | Heating wires. Specifications | ||
59 | sections 6 and 7 of ST RK 2527-2014 | Wires with polyethylene insulating and protective sheath for field communication. Specifications | ||
60 | ST RK 2641-2015 | Single-pair telephone distribution wires. Specifications | ||
61 | ST RK 2794-2015 | Self-supporting insulated and covered wires for overhead power transmission lines. Specifications | ||
62 | Article 4 | sections 6 and 7 of GOST 31995-2012 | Signalling and interlocking cables with polyethylene insulation in plastic sheath. Specifications | |
63 | Article 4 | sections 7 and 8 of GOST 31996-2012 | Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications | |
64 | sections 4 and 5 of GOST 16442-80 | Power cables with plastic insulation. Specifications | applies until 01.06.2017 | |
65 | sections 6 and 7 of ST RK 2338-2013 | Flexible cables with polyvinyl chloride insulation and sheath. General specifications | ||
66 | sections 6 and 7 of ST RK 2339-2013 | Low-pair-count telephone cables with plastic insulation in plastic sheath. Specifications | ||
67 | sections 6 and 7 of ST RK 2340-2013 | Stationary telephone cables. Specifications | ||
68 | sections 6 and 7 of ST RK 2643-2015 | High-frequency local communication cables. Specifications | ||
69 | sections 6 and 7 of ST RK 2644-2015 | Combined cables for video surveillance systems. Specifications | ||
70 |
paragraphs | STB EN 41003-2008 | Additional safety requirements for equipment to be connected to telecommunication networks | |
71 |
paragraphs | GOST EN 50087-2014 | Safety of household and similar electrical appliances. Additional requirements for coolers of freshly drawn milk | |
72 |
paragraphs | GOST EN 50085-1-2008 | Cable trunking systems for electrical installations. Part 1. General requirements | |
73 |
paragraphs | GOST EN 50085-2-3-2008 | Cable trunking systems for electrical installations. Part 2-3. Additional requirements for wiring ducts installed in distribution cabinets | |
74 |
paragraphs | STB EN 50106-2011 | Household and similar electrical appliances. Safety. Requirements for routine tests of appliances within the scope of EN 60335-1 | |
75 |
paragraphs | GOST EN 50274-2012 | Low-voltage switchgear and controlgear. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts | |
76 |
paragraphs | STB EN 50395-2013 | Electrical test methods for low-voltage power cables | |
77 |
paragraphs | GOST EN 50445-2013 | Equipment for resistance and arc welding and allied processes. Conformity assessment against basic restrictions related to human exposure to electromagnetic fields (0 Hz – 300 GHz) | |
78 | Article 4 | GOST EN 50497-2015 | Tests on cables with polyvinyl chloride (PVC) insulation and sheath. Method for determining released plasticizer | |
79 |
paragraphs first, | GOST IEC 60034-1-2014 | Rotating electrical machines. Part 1. Rated values of parameters and performance characteristics | |
80 | GOST IEC 60034-1-2007 | Rotating electrical machines. Part 1. Rating and performance | applies until 01.06.2017 | |
81 |
paragraphs | GOST IEC 60034-5-2011 | Rotating electrical machines. Part 5. Classification of degrees of protection provided by enclosures of rotating electrical machines (IP Code) | |
82 |
paragraphs | GOST IEC 60034-6-2007 | Rotating electrical machines. Part 6. Methods of cooling (IC code) | |
83 |
paragraphs first, tenth | GOST IEC 60034-7-2007 | Rotating electrical machines. Part 7. Classification of types of construction depending on mounting arrangements and terminal box position (IM code) | |
84 | twelfth paragraph of Article 4, Article 5 | GOST IEC 60034-8-2015 | Rotating electrical machines. Part 8. Terminal markings and direction of rotation | |
85 |
paragraphs | GOST IEC 60034-9-2014 | Rotating electrical machines. Part 9. Noise limits | |
86 | paragraphs first, third, | GOST IEC 60034-11-2014 | Rotating electrical machines. Part 11. Thermal protection | |
87 |
ninth, tenth | GOST 27888-88 (IEC 34-11) | Rotating electrical machines. Built-in thermal protection. Rules for protection | applies until 01.06.2017 |
88 | GOST 27917-88 (IEC 34-11-2) | Rotating electrical machines. Built-in thermal protection. Thermal detectors and auxiliary control equipment used in thermal protection systems | applies until 01.06.2017 | |
89 | GOST 27895-88 (IEC 34-11-3) | Rotating electrical machines. Built-in thermal protection. General rules for thermal-current relays used in thermal protection systems | applies until 01.06.2017 | |
90 | ST RK IEC 60034-11-2012 | Rotating electrical machines. Part 11. Thermal protection | applies until 01.06.2017 | |
91 |
paragraphs | GOST 28327-89 (IEC 34-12–80) | Rotating electrical machines. Starting performance of single-speed three-phase squirrel-cage induction motors for voltages up to and including 660 V | |
92 | GOST R IEC 60034-12-2009 | Rotating electrical machines. Part 12. Starting performance of single-speed three-phase squirrel-cage motors | ||
93 |
paragraphs | GOST IEC 60034-14-2014 | Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft heights of 56 mm and higher. Measurement, evaluation and limits of vibration severity | |
94 | GOST R IEC 60034-14-2008 | Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft axis heights of 56 mm and higher. Measurement, evaluation and limits of vibration | applies until 01.06.2017 | |
95 |
paragraphs | GOST IEC 60034-29-2013 | Rotating electrical machines. Part 29. Equivalent loading and superposition techniques. Indirect determination of temperature rise | |
96 |
paragraphs |
GOST 30012.1-2002 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts | |
97 |
paragraphs | GOST 8711-93 (IEC 51-2–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters | |
98 |
paragraphs | GOST 8476-93 (IEC 51-3–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters | |
99 |
paragraphs | GOST 7590-93 (IEC 51-4–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4. Special requirements for frequency meters |
100 |
paragraphs | GOST 8039-93 (IEC 51-5–85) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes | |
101 |
paragraphs | GOST 23706-93 (IEC 51-6–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters | |
102 |
paragraphs | GOST 10374-93 (IEC 51-7–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments | |
103 |
paragraphs | GOST 8042-93 (IEC 51-8–84) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories | |
104 |
paragraphs | GOST 30012.9-93 (IEC 51-9-88) | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9. Recommended test methods | |
105 | Articles 4 and 5 | GOST IEC 60065-2013 | Audio, video and similar electronic apparatus. Safety requirements. | |
106 | Articles 4 and 5 | GOST IEC 60110-1-2013 | Power capacitors for induction heating installations. Part 1. General | |
107 | ST RK IEC 60110-1-2012 | Power capacitors for induction heating installations. Part 1. General | applies until 01.06.2017 | |
108 |
paragraphs | GOST IEC 60127-1-2010 | Miniature fuses. Part 1. Terminology for miniature fuses and general requirements for miniature fuse-links | |
109 |
paragraphs | GOST IEC 60127-2-2013 | Miniature fuses. Part 2. Cartridge fuse-links | |
110 | GOST R IEC 60127-2-2010 | Miniature fuses. Part 2. Cartridge fuse-links | applies until 01.06.2017 | |
111 |
paragraphs | GOST IEC 60127-3-2013 | Miniature fuses. Part 3. Sub-miniature fuse-links | |
112 | GOST R IEC 60127-3-2010 | Miniature fuses. Part 3. Sub-miniature fuse-links | applies until 01.06.2017 | |
113 |
paragraphs | GOST IEC 60127-4-2011 | Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mounting | |
114 |
paragraphs | GOST IEC 60127-6-2013 | Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links. Fuse-holders with a miniature fuse-link | |
115 | GOST R IEC 127-6-99 | Miniature fuses. Part 6. Fuse-holders for miniature fuse-links | applies until 01.06.2017 | |
116 |
paragraphs | GOST IEC 60143-2-2013 | Series capacitors for power systems. Part 2. Protective equipment for series capacitor banks | |
117 |
paragraphs | GOST IEC 60155-2012 | Glow starters for fluorescent lamps | |
118 | GOST IEC 60155-2002 | Glow starters for fluorescent lamps | applies until 01.06.2017 | |
119 | Articles 4 and 5 | GOST IEC 60204-1-2002 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements | |
120 | GOST R IEC 60204-1-2007 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements | ||
121 | Articles 4 and 5 | GOST IEC 60204-31-2012 | Safety of machinery. Electrical equipment of machines and mechanisms. Part 31. Additional safety requirements and electromagnetic compatibility requirements for sewing machines, units and systems | |
122 | Articles 4 and 5 | STB IEC 60215-2011 | Safety requirements for radio transmitting equipment | |
123 | Article 4 | GOST IEC 60227-1-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | |
124 | STB IEC 60227-1-2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | applies until 01.06.2017 | |
125 | Article 4 | GOST IEC 60227-2-2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods | |
126 | Article 4 | GOST IEC 60227-3-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring | |
127 | Article 4 | GOST IEC 60227-4-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Sheathed cables for fixed wiring | |
128 | Article 4 | GOST IEC 60227-5-2013 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5. Flexible cables (cords) | |
129 | Article 4 | GOST IEC 60227-6-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Lift cables and cables for flexible connections | |
130 | STB IEC 60227-6-2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6. Lift cables and cables for flexible connections | ||
131 | Article 4 | GOST IEC 60227-7-2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Flexible cables, screened and unscreened, with two or more conductors | |
132 | STB IEC 60227-7-2010 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Flexible cables, screened and unscreened, with two or more conductors | ||
133 |
paragraphs | GOST 22483-2012 (IEC 60228:2004) | Copper and aluminium current-carrying conductors for cables, wires and cords | |
134 |
paragraphs | GOST IEC 60238-2012 | Screw lampholders | |
135 | GOST IEC 60238-2002 | Screw lampholders | applies until 01.06.2017 | |
136 | Article 4 | GOST IEC 60245-1-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | |
137 | STB IEC 60245-1-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements | applies until 01.06.2017 | |
138 | Article 4 | GOST IEC 60245-2-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods | |
139 | STB IEC 60245-2-2012 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods | ||
140 | Article 4 | GOST IEC 60245-3-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Cables with heat-resistant silicone insulation | |
141 | STB IEC 60245-3-2012 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 3. Cables with heat-resistant silicone insulation | ||
142 | Article 4 | GOST IEC 60245-4-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 4. Cords and flexible cables | |
143 | Article 4 | GOST IEC 60245-5-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Lift cables | |
144 | STB IEC 60245-5-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 5. Lift cables | ||
145 | Article 4 | GOST IEC 60245-6-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Electrode arc welding cables | |
146 | STB IEC 60245-6-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 6. Cables for arc welding with an electrode | ||
147 | Article 4 | GOST IEC 60245-7-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Cables with heat-resistant ethylene-vinyl acetate rubber insulation | |
148 | STB IEC 60245-7-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 7. Cables with heat-resistant ethylene-vinyl acetate rubber insulation | applies until 01.06.2017 | |
149 | Article 4 | GOST IEC 60245-8-2011 | Rubber insulated cables of rated voltages up to and including 450/750 V. Part 8. Cords for applications requiring high flexibility | |
150 |
paragraphs | GOST IEC 60252-1-2011 | AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation | |
151 |
paragraphs | GOST IEC 60252-2-2011 | AC motor capacitors. Part 2. Motor start capacitors | |
152 | STB IEC 60252-2-2007 | AC motor capacitors. Part 2. Motor start capacitors | applies until 01.06.2017 | |
153 | Articles 4 and 5 | GOST IEC 60255-1-2014 | Measuring relays and protection equipment. Part 1. General requirements | |
154 |
GOST 30329-95 | Electrical all-or-nothing relays | applies until 01.06.2017 | |
155 |
paragraphs | GOST IEC 60255-5-2014 | Electrical relays. Part 5. Insulation coordination for measuring relays and protection equipment. Requirements and tests | |
156 | GOST 30328-95 (IEC 255-5–77) | Electrical relays. Insulation testing | applies until 01.06.2017 | |
157 |
paragraphs | GOST IEC 60255-16-2013 | Electrical relays. Part 16. Impedance measuring relays | |
158 |
paragraphs | GOST IEC 60255-27-2013 | Measuring relays and protection equipment. Part 27. Safety requirements | |
159 | Articles 4 and 5 | GOST IEC 60269-1-2012 | Low-voltage fuses. Part 1. General requirements | |
160 | GOST R IEC 60269-1-2010 | Low-voltage fuses. Part 1. General requirements | ||
161 |
paragraphs |
GOST 31196.2-2012 | Low-voltage fuses. Part 2. Supplementary requirements for fuses for industrial application | |
162 |
paragraphs |
GOST 31196.2.1-2012 | Low-voltage fuses. Part 2-1. Supplementary requirements for fuses for industrial application. Sections I – III | |
163 |
paragraphs |
GOST 31196.3-2012 | Low-voltage fuses. Part 3. Supplementary requirements for fuses for household and similar application | |
164 |
paragraphs | GOST IEC 60269-3-1-2011 | Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses for household and similar application). Sections I – IV | |
165 |
paragraphs |
GOST 31196.4-2012 | Low-voltage fuses. Part 4. Supplementary requirements for fuses for the protection of semiconductor devices | |
166 | paragraphs | GOST IEC | Low-voltage fuses. Part 4-1. | |
first and seventh of Article 4 | 60269-4-1-2011 | Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I – III. Examples of types of standardized fuse-links | ||
167 | paragraphs | GOST IEC | Low-voltage fuses. Part 6. | |
first – fourth, sixth, eighth | 60269-6-2013 | Supplementary requirements for fuse-links for solar photovoltaic energy systems | ||
168 | paragraphs | GOST | Plugs, socket-outlets and couplers | |
first – fourth, sixth, eighth | 30849.1-2002 (IEC 60309-1-99) | for industrial purposes. Part 1. General requirements | ||
169 | paragraphs | GOST | Plugs, socket-outlets and couplers | |
first – fourth, | 30849.2-2002 | for industrial purposes. Part 2. Requirements for | ||
sixth, eighth | (IEC 60309-2-99) | dimensional interchangeability of connector pins and contact sockets | ||
170 | paragraphs | GOST IEC | Plugs, socket-outlets and couplers for industrial purposes. | |
first – fourth, sixth, eighth | 60309-4-2013 | Part 4. Switched socket-outlets and connectors with and without interlock | ||
171 |
paragraphs | GOST 30851.1-2002 | Electrical connectors for household and similar purposes. Part 1. General requirements and test methods | |
172 |
paragraphs |
GOST 30851.2.2-2002 | Electrical connectors for household and similar purposes. Part 2-2. Additional requirements for plugs and sockets for the interconnection of appliances and test methods | |
173 |
paragraphs |
GOST 30851.2.3-2012 | Electrical connectors for household and similar purposes. Part 2-3. Additional requirements for connectors with a degree of protection higher than IPX0 and test methods | |
174 |
paragraphs | GOST IEC 60331-1-2013 | Tests for electric cables under fire conditions. Circuit integrity. Part 1. Test method for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm, exposed to fire at a temperature of at least 830°C combined with mechanical shock | |
175 | ST RK IEC 60331-1-2010 | Tests for electric cables under fire conditions. Circuit integrity. Part 1. Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm | applies until 01.06.2017 | |
176 |
paragraphs | GOST IEC 60331-2-2013 | Tests for electric cables under fire conditions. Circuit integrity. Part 2. Test method for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm, exposed to fire at a temperature of at least 830 °C combined with mechanical shock | |
177 | ST RK IEC 60331-2-2010 | Tests for electric cables under fire conditions. Circuit integrity. Part 2. Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm | applies until 01.06.2017 | |
178 |
paragraphs | GOST IEC 60331-3-2013 | Tests for electric cables under fire conditions. Circuit integrity. Part 3. Test method for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure, exposed to fire at a temperature of at least 830 °C combined with mechanical shock |
179 | ST RK IEC 60331-3-2010 | Tests on electric cables under fire conditions. Circuit integrity. Part 3. Test method for exposure to flame combined with mechanical shock at a temperature of not less than 830 °C for cables with a rated voltage up to and including 0,6/1,0 kV in a metal enclosure | applies until 01.06.2017 | |
180 |
paragraphs | GOST R IEC 60331-11-2012 | Tests on electric and optical cables under fire conditions. Circuit integrity. Part 11. Test equipment. Exposure to flame at a temperature of not less than 750°C | |
181 | of Article 4 | GOST R IEC 60331-11-2003 | Tests on electric and optical cables under fire conditions. Circuit integrity. Part 11. Test equipment. Exposure to flame at a temperature of not less than 750°C | applies until 01.01.2018 |
182 | ST RK IEC 60331-11-2010 | Tests on electric cables under fire conditions. Circuit integrity. Part 11. Test equipment. Exposure to flame at a temperature of not less than 750°C | ||
183 |
paragraphs | GOST IEC 60331-21-2011 | Tests on electric and optical cables under fire conditions. Circuit integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV | |
184 |
paragraphs | GOST IEC 60331-23-2011 | Tests on electric and optical cables under fire conditions. Circuit integrity. Part 23. Procedures and requirements. Electric data cables | |
185 | ST RK IEC 60331-23-2010 | Tests on electric cables under fire conditions. Circuit integrity. Part 23. Procedures and requirements. Electric data cables | applies until 01.06.2017 | |
186 |
paragraphs | GOST IEC 60331-25-2011 | Tests on electric and optical cables under fire conditions. Circuit integrity. Part 25. Procedures and requirements. Optical cables | |
187 | ST RK IEC 60331-25-2010 | Tests on electric cables under fire conditions. Circuit integrity. Part 25. Procedures and requirements. Optical fibre cables | applies until 01.06.2017 | |
188 |
paragraphs | GOST IEC 60332-1-1-2011 | Tests on electric and optical cables under fire conditions. Part 1-1. Test for non-propagation of flame for a single vertically arranged insulated wire or cable. Test equipment | |
189 | STB IEC 60332-1-1-2010 | Tests on electric and optical cables under fire conditions. Part 1-1. Test for non-propagation of flame for a single, vertically arranged insulated wire or cable. Test equipment | applies until 01.06.2017 | |
190 | ST RK IEC 60332-1-1-2010 | Tests on electric and optical fibre cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Test equipment | applies until 01.06.2017 | |
191 |
paragraphs | GOST IEC 60332-1-2-2011 | Tests on electric and optical cables under fire conditions. Part 1-2. Test for non-propagation of flame for a single vertically arranged insulated wire or cable. Test procedure with exposure to the flame of a 1 kW gas burner with pre-mixing of gases | |
192 | STB IEC 60332-1-2-2010 | Tests on electric and optical cables under fire conditions. Part 1-2. Test for non-propagation of flame for a single, vertically arranged insulated wire or cable. Test procedure with exposure to the flame of a 1 kW gas burner with pre-mixing of gases | applies until 01.06.2017 | |
193 | ST RK IEC | Tests on electric and optical fibre cables under | applies | |
60332-1-2-2010 | fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Test procedure with a 1 kW burner flame with pre-mixing of gases | until 01.06.2017 | ||
194 | paragraphs | GOST IEC | Tests on electric and optical cables under conditions of | |
first – fourth, | 60332-1-3-2011 | exposure to flame. Part 1-3. Test for non-propagation of flame for a single vertically arranged insulated wire or cable. Test procedure for the formation of flaming droplets/particles | ||
195 | ST RK IEC | Tests on electric and optical fibre cables under | applies | |
60332-1-3-2010 | fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Test procedure for the formation of flaming droplets/particles | until 01.06.2017 | ||
196 | paragraphs | GOST IEC | Tests on electric and optical cables under conditions of | |
first – fourth, | 60332-2-1-2011 | exposure to flame. Part 2-1. Test for non-propagation of flame for a single vertically arranged small insulated wire or cable. Test equipment | ||
197 | ST RK IEC | Tests on electric and optical fibre cables under | applies | |
60332-2-1-2010 | fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Test equipment | until 01.06.2017 | ||
198 |
paragraphs | GOST IEC 60332-2-2-2011 | Tests on electric and optical cables under fire conditions. Part 2-2. Test for non-propagation of flame for a single vertically arranged small insulated wire or cable. Test procedure with a diffusion flame | |
199 | ST RK IEC 60332-2-2-2010 | Tests on electric and optical fibre cables under fire conditions. Part 2-2. Test for vertical flame propagation for a single small insulated wire or cable. Test procedure with a diffusion flame | applies until 01.06.2017 | |
200 |
paragraphs | GOST IEC 60332-3-10-2015 | Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread along vertically mounted bunched wires or cables. Test apparatus | |
201 | STB IEC 60332-3-10-2011 | Tests on electric and optical cables under fire conditions. Part 3-10. Test for vertical flame spread along vertically mounted bunched wires or cables. Test apparatus | applies until 01.01.2018 | |
202 | GOST R IEC 60332-3-10-2011 | Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread along vertically mounted bunched wires or cables. Test apparatus | applies until 01.01.2018 | |
203 | ST RK IEC 60332-3-10-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-10. Test of wires or cables bunched in a vertical position for vertical flame spread. Test equipment | applies until 01.01.2018 | |
204 |
paragraphs | GOST IEC 60332-3-21-2011 | Tests on electric and optical cables under fire conditions. Part 3-21. Flame spread along vertically mounted bunched wires or cables. Category A F/R | |
205 | STB IEC 60332-3-21-2011 | Tests on electric and optical cables under fire conditions. Part 3-21. Test for vertical flame spread along vertically mounted bunched wires or cables. Category A F/R | applies until 01.06.2017 | |
206 | ST RK IEC 60332-3-21-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-21. Test of wires or cables bunched in a vertical position for vertical flame spread. Category A F/R | applies until 01.06.2017 | |
207 |
paragraphs | GOST IEC 60332-3-22-2011 | Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread along vertically mounted bunched wires or cables. Category A | |
208 | STB IEC 60332-3-22-2011 | Tests on electric and optical cables under fire conditions. Part 3-22. Test for vertical flame spread along vertically mounted bunched wires or cables. Category A | applies until 01.06.2017 | |
209 | ST RK IEC 60332-3-22-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-22. Test of wires or cables bunched in a vertical position for vertical flame spread. Category A | applies until 01.06.2017 | |
210 |
paragraphs | GOST IEC 60332-3-23-2011 | Tests on electric and optical cables under fire conditions. Part 3-23. Flame spread along vertically mounted bunched wires or cables. Category B | |
211 | of Article 4 | STB IEC 60332-3-23-2011 | Tests on electric and optical cables under fire conditions. Part 3-23. Test for vertical flame spread along vertically mounted bunched wires or cables. Category B | applies until 01.06.2017 |
212 | ST RK IEC 60332-3-23-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-23. Test of wires or cables bunched in a vertical position for vertical flame spread. Category B | applies until 01.06.2017 | |
213 |
paragraphs | GOST IEC 60332-3-24-2011 | Tests on electric and optical cables under fire conditions. Part 3-24. Flame spread along vertically mounted bunched wires or cables. Category C | |
214 | STB IEC 60332-3-24-2011 | Tests on electric and optical cables under fire conditions. Part 3-24. Test for vertical flame spread along vertically mounted bunched wires or cables. Category C | applies until 01.06.2017 | |
215 | ST RK IEC 60332-3-24-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-24. Test of wires or cables bunched in a vertical position for vertical flame spread. Category C | applies until 01.06.2017 | |
216 |
paragraphs | GOST IEC 60332-3-25-2011 | Tests on electric and optical cables under fire conditions. Part 3-25. Flame spread along vertically mounted bunched wires or cables. Category D | |
217 | STB IEC 60332-3-25-2011 | Tests on electric and optical cables under fire conditions. Part 3-25. Test for vertical flame spread along vertically mounted bunched wires or cables. Category D | applies until 01.06.2017 | |
218 | ST RK IEC 60332-3-25-2010 | Tests on electric and optical fibre cables under fire conditions. Part 3-25. Test of wires or cables bunched in a vertical position for vertical flame spread. Category D | applies until 01.06.2017 | |
219 | Articles 4 and 5 | GOST IEC 60335-1-2015 | Household and similar electrical appliances. Safety. Part 1. General requirements | |
220 | STB IEC 60335-1-2013 | Household and similar electrical appliances. Safety. Part 1. General requirements | applies until 01.01.2018 | |
221 | GOST IEC 60335-1-2008 | Household and similar electrical appliances. Safety. Part 1. General requirements | applies until 01.06.2017 | |
222 | Articles 4 and 5 | GOST IEC 60335-2-2-2013 | Safety of household and similar electrical appliances. Part 2.2.Particular requirements for vacuum cleaners and water-suction cleaning appliances | |
223 | Articles 4 and 5 | GOST IEC 60335-2-3-2014 | Household and similar electrical appliances. Safety. Part 2-3. Particular requirements for electric irons | |
224 | GOST IEC 60335-2-3-2009 | Household and similar electrical appliances. Safety. Part 2-3. Additional requirements for electric irons | applies until 01.06.2017 | |
225 | Articles 4 and 5 | GOST IEC 60335-2-4-2013 | Safety of household and similar electrical appliances. Part 2.4. Particular requirements for spin extractors | |
226 | Articles 4 and 5 | GOST IEC 60335-2-5-2014 | Household and similar electrical appliances. Safety. Part 2-5. Particular requirements for dishwashers | |
227 | GOST IEC 60335-2-5-2012 | Safety of household and similar electrical appliances. Part 2-5. Particular requirements for dishwashers | applicable until 01.01.2017 | |
228 | STB IEC 60335-2-5-2005 | Household and similar electrical appliances. Safety. Part 2-5. Additional requirements for dishwashers | applicable until 01.06.2017 | |
229 | Articles 4 and 5 | GOST IEC 60335-2-6-2010 | Safety of household and similar electrical appliances. Part 2-6. Additional requirements for stationary cooking ranges, hobs, ovens and similar appliances | |
230 | Articles 4 and 5 | GOST IEC 60335-2-7-2014 | Safety of household and similar electrical appliances. Part 2.7. Particular requirements for washing machines | |
231 | Articles 4 and 5 | GOST IEC 60335-2-8-2016 | Household and similar electrical appliances. Safety. Part 2-8. Particular requirements for shavers, hair clippers and similar appliances | |
232 | GOST IEC 60335-2-8-2012 | Safety of household and similar electrical appliances. Part 2-8. Particular requirements for shavers, hair clippers and similar appliances | applicable until 01.06.2017 | |
233 | Articles 4 and 5 | GOST IEC 60335-2-9-2013 | Safety of household and similar electrical appliances. Part 2.9. Particular requirements for grills, toasters and similar portable cooking appliances | |
234 | STB IEC 60335-2-9-2008 | Household and similar electrical appliances. Safety. Part 2-9. Additional requirements for grills, toasters and similar portable cooking appliances | applicable until 01.06.2017 | |
235 | Articles 4 and 5 | GOST IEC 60335-2-10-2012 | Safety of household and similar electrical appliances. Part 2-10. Particular requirements for floor treatment machines and wet scrubbing machines | |
236 | STB IEC 60335-2-10-2004 | Household and similar electrical appliances. Safety. Part 2-10. Additional requirements for floor treatment machines and wet scrubbing machines | applicable until 01.06.2017 | |
237 | Articles 4 and 5 | GOST IEC 60335-2-11-2016 | Safety of household and similar electrical appliances. Part 2-11. Particular requirements for tumble dryers | |
238 | GOST IEC 60335-2-11-2012 | Safety of household and similar electrical appliances. Part 2-11. Particular requirements for tumble dryers | applicable until 01.06.2017 | |
239 | Articles 4 and 5 | GOST IEC 60335-2-12-2012 | Safety of household and similar electrical appliances. Part 2-12. Particular requirements for warming plates and similar appliances | |
240 | Articles 4 and 5 | GOST IEC 60335-2-13-2013 | Safety of household and similar electrical appliances. Part 2-13. Particular requirements for deep fat fryers, frying pans and similar appliances | |
241 | Articles 4 and 5 | GOST IEC 60335-2-14-2013 | Safety of household and similar electrical appliances. Part 2-14. Particular requirements for kitchen machines | |
242 | Articles 4 and 5 | GOST IEC 60335-2-15-2014 | Household and similar electrical appliances. Safety. Part 2-15. Particular requirements for appliances for heating liquids | |
243 | GOST IEC 60335-2-15-2012 | Safety of household and similar electrical appliances. Part 2-15. Particular requirements for appliances for heating liquids | applicable until 01.01.2017 | |
244 | STB IEC 60335-2-15-2006 | Household and similar electrical appliances. Safety. Part 2-15. Additional requirements for appliances for heating liquids | applicable until 01.06.2017 | |
245 | Articles 4 and 5 | GOST IEC 60335-2-16-2012 | Safety of household and similar electrical appliances. Part 2-16. Particular requirements for food waste disposers | |
246 | Articles 4 and 5 | GOST IEC 60335-2-17-2014 | Household and similar electrical appliances. Safety. Part 2-17. Particular requirements for blankets, pads, clothing and similar flexible heating appliances | |
247 | GOST IEC 60335-2-17-2012 | Safety of household and similar electrical appliances. Part 2-17. Particular requirements for blankets, pads, clothing and similar flexible heating appliances | applicable until 01.01.2017 | |
248 | Articles 4 and 5 | GOST IEC 60335-2-21-2014 | Household and similar electrical appliances. Safety. Part 2-21. Particular requirements for storage water heaters | |
249 | GOST IEC 60335-2-21-2012 | Safety of household and similar electrical appliances. Part 2-21. Particular requirements for storage water heaters | applicable until 01.06.2017 |
250 | STB IEC 60335-2-21-2005 | Household and similar electrical appliances. Safety. Part 2-21. Additional requirements for storage water heaters | applies until 01.06.2017 | |
251 | Articles 4 and 5 | GOST IEC 60335-2-23-2009 | Household and similar electrical appliances. Part 2-23. Additional requirements for appliances for skin or hair care | |
252 | Articles 4 and 5 | GOST IEC 60335-2-24-2016 | Safety of household and similar electrical appliances. Part 2.24. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers | |
253 | GOST IEC 60335-2-24-2012 | Safety of household and similar electrical appliances. Part 2.24. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers | applies until 01.06.2017 | |
254 | STB IEC 60335-2-24-2013 | Household and similar electrical appliances. Safety. Part 2-24. Additional requirements for refrigerating appliances, ice-cream appliances and ice-making appliances | applies until 01.06.2017 | |
255 | Articles 4 and 5 | GOST IEC 60335-2-25-2014 | Safety of household and similar electrical appliances. Part 2-25. Particular requirements for microwave ovens, including combination microwave ovens | |
256 | STB IEC 60335-2-25-2012 | Household and similar electrical appliances. Safety. Part 2-25. Additional requirements for microwave ovens, including combination microwave ovens | applies until 01.06.2017 | |
257 | Articles 4 and 5 | GOST IEC 60335-2-26-2013 | Safety of household and similar electrical appliances. Part 2-26. Particular requirements for clocks | |
258 | Articles 4 and 5 | GOST IEC 60335-2-27-2014 | Safety of household and similar electrical appliances. Part 2-27. Particular requirements for ultraviolet and infrared radiation appliances for skin care | |
259 | GOST IEC 60335-2-27-2009 | Household and similar electrical appliances. Safety. Part 2-27. Additional requirements for appliances for skin exposure to ultraviolet and infrared radiation | applies until 01.06.2017 | |
260 | Articles 4 and 5 | GOST IEC 60335-2-28-2012 | Safety of household and similar electrical appliances. Part 2-28. Particular requirements for sewing machines | |
261 | STB IEC 60335-2-28-2006 | Household and similar electrical appliances. Safety. Part 2-28. Additional requirements for sewing machines | applies until 01.06.2017 | |
262 | Articles 4 and 5 | GOST IEC 60335-2-29-2012 | Safety of household and similar electrical appliances. Part 2-29. Particular requirements for battery chargers | |
263 | Articles 4 and 5 | GOST IEC 60335-2-30-2013 | Safety of household and similar electrical appliances. Part 2-30. Particular requirements for room heaters | |
264 | STB IEC 60335-2-30-2013 | Household and similar electrical appliances. Safety. Part 2-30. Additional requirements for room heaters | applies until 01.06.2017 | |
265 | Articles 4 and 5 | GOST IEC 60335-2-31-2014 | Household and similar electrical appliances. Safety. Part 2-31. Additional requirements for kitchen hoods and other cooking fume extractors | |
266 | GOST IEC 60335-2-31-2010 | Household and similar electrical appliances. Safety. Part 2-31. Additional requirements for kitchen hoods and other cooking fume extractors | applies until 01.06.2017 | |
267 | Articles 4 and 5 | GOST IEC 60335-2-32-2012 | Safety of household and similar electrical appliances. Part 2-32. Particular requirements for massage appliances | |
268 | Articles 4 and 5 | GOST IEC 60335-2-34-2016 | Household and similar electrical appliances. Safety. Part 2-34. Particular requirements for motor-compressors | |
269 | GOST IEC 60335-2-34-2012 | Safety of household and similar electrical appliances. Part 2-34. Additional requirements for motor-compressors | applies until 01.06.2017 | |
270 | STB IEC 60335-2-34-2010 | Household and similar electrical appliances. Safety. Part 2-34. Additional requirements for motor-compressors | applies until 01.06.2017 | |
271 | Articles 4 and 5 | GOST IEC 60335-2-35-2014 | Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters | |
272 | GOST IEC 60335-2-35-2009 | Safety of household and similar electrical appliances. Part 2-35. Additional requirements for instantaneous water heaters | applies until 01.06.2017 | |
273 | Articles 4 and 5 | STB IEC 60335-2-36-2005 | Household and similar electrical appliances. Safety. Part 2-36. Additional requirements for electric cooking ranges, ovens, hobs and heating elements for catering establishments | |
274 | Articles 4 and 5 | GOST IEC 60335-2-37-2012 | Safety of household and similar electrical appliances. Part 2-37. Particular requirements for electric deep fat fryers for catering establishments | |
275 | STB IEC 60335-2-37-2011 | Household and similar electrical appliances. Safety. Part 2-37. Additional requirements for electric deep fat fryers for catering establishments | applies until 01.06.2017 | |
276 | Articles 4 and 5 | GOST IEC 60335-2-38-2013 | Safety of household and similar electrical appliances. Part 2-38. Particular requirements for electric contact-cooking appliances with one and two heating surfaces for catering establishments | |
277 | Articles 4 and 5 | GOST IEC 60335-2-39-2013 | Safety of household and similar electrical appliances. Part 2-39. Particular requirements for electric multi-purpose cooking pans for catering establishments | |
278 | Articles 4 and 5 | GOST IEC 60335-2-40-2016 | Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | |
279 | GOST IEC 60335-2-40-2010 | Household and similar electrical appliances. Safety. Part 2-40. Additional requirements for electrical heat pumps, air-conditioners and dehumidifiers | applies until 01.06.2017 | |
280 | Articles 4 and 5 | GOST IEC 60335-2-41-2015 | Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps | |
281 | GOST IEC 60335-2-41-2009 | Household and similar electrical appliances. Safety. Part 2-41. Additional requirements for pumps | applies until 01.06.2017 | |
282 | Articles 4 and 5 | GOST IEC 60335-2-42-2013 | Safety of household and similar electrical appliances. Part 2-42. Particular requirements for electric forced-air-circulation ovens, steam cookers and steam-convection ovens for catering establishments | |
283 | Articles 4 and 5 | ГОСТ IEC 60335-2-43-2012 | Safety of household and similar electrical appliances. Part 2-43. Particular requirements for clothes dryers and towel rails | |
284 | Articles 4 and 5 | ГОСТ IEC 60335-2-44-2016 | Safety of household and similar electrical appliances. Part 2-44. Particular requirements for ironers | |
285 | ГОСТ IEC 60335-2-44-2012 | Safety of household and similar electrical appliances. Part 2-44. Particular requirements for ironers | applies until 01.06.2017 | |
286 | Articles 4 and 5 | ГОСТ IEC 60335-2-45-2014 | Safety of household and similar electrical appliances. Part 2-45. Particular requirements for portable heating tools and similar appliances | |
287 | Articles 4 and 5 | ГОСТ IEC 60335-2-47-2012 | Safety of household and similar electrical appliances. Part 2-47. Particular requirements for electric boiling pans for public catering establishments | |
288 | СТБ IEC 60335-2-47-2011 | Household and similar electrical appliances. Safety. Part 2-47. Additional requirements for electric boiling pans for public catering establishments | applies until 01.06.2017 | |
289 | Articles 4 and 5 | ГОСТ IEC 60335-2-48-2013 | Safety of household and similar electrical appliances. Part 2-48. Particular requirements for electric grills and toasters for public catering establishments | |
290 | Articles 4 and 5 | СТБ IEC 60335-2-49-2010 | Household and similar electrical appliances. Safety. Part 2-49. Additional requirements for electric hot cupboards for public catering establishments | |
291 | Articles 4 and 5 | ГОСТ IEC 60335-2-50-2013 | Safety of household and similar electrical appliances. Part 2-50. Particular requirements for electric bains-marie for catering facilities | |
292 | Articles 4 and 5 | ГОСТ IEC 60335-2-51-2012 | Safety of household and similar electrical appliances. Part 2.51. Particular requirements for stationary circulation pumps for heating systems and water supply systems | |
293 | Articles 4 and 5 | ГОСТ IEC 60335-2-52-2013 | Safety of household and similar electrical appliances. Part 2.52. Particular requirements for oral hygiene appliances | |
294 | Articles 4 and 5 | ГОСТ IEC 60335-2-53-2014 | Household and similar electrical appliances. Safety. Part 2.53. Particular requirements for sauna heating appliances and infrared cabins | |
295 | СТБ МЭК 60335-2-53-2005 | Household and similar electrical appliances. Safety. Part 2-53. Additional requirements for sauna heating appliances | applies until 01.06.2017 | |
296 | Articles 4 and 5 | ГОСТ IEC 60335-2-54-2014 | Safety of household and similar electrical appliances. Part 2.54. Particular requirements for household surface-cleaning appliances employing liquids or steam | |
297 | ГОСТ IEC 60335-2-54-2012 | Safety of household and similar electrical appliances. Part 2.54. Particular requirements for surface-cleaning appliances employing liquids or steam | applies until 01.06.2017 | |
298 | Articles 4 and 5 | ГОСТ IEC 60335-2-55-2013 | Safety of household and similar electrical appliances. Part 2-55. Particular requirements for electrical appliances for use with aquariums and garden ponds | |
299 | Articles 4 and 5 | ГОСТ IEC 60335-2-56-2013 | Safety of household and similar electrical appliances. Part 2-56. Particular requirements for projectors and similar appliances | |
300 | Articles 4 and 5 | ГОСТ МЭК 60335-2-58-2009 | Household and similar electrical appliances. Safety. Part 2-58. Additional requirements for dishwashing machines for public catering establishments | |
301 | Articles 4 and 5 | ГОСТ IEC 60335-2-59-2012 | Safety of household and similar electrical appliances. Part 2-59. Particular requirements for insect killers | |
302 |
ГОСТ Р 52161.2.59-2008 | Safety of household and similar electrical appliances. Part 2.59. Particular requirements for insect killers | applies until 01.06.2017 | |
303 | Articles 4 and 5 | ГОСТ МЭК 60335-2-60-2002 | Safety of household and similar electrical appliances. Additional requirements for hydromassage baths and test methods | |
304 |
ГОСТ Р 52161.2.60-2011 | Safety of household and similar electrical appliances. Part 2.60. Particular requirements for whirlpool baths and whirlpool baths for spa salons | ||
305 | Articles 4 and 5 | ГОСТ IEC 60335-2-61-2013 | Safety of household and similar electrical appliances. Part 2-61. Particular requirements for thermal storage room heaters | |
306 | Articles 4 and 5 | ГОСТ IEC 60335-2-62-2013 | Safety of household and similar electrical appliances. Part 2-62. Particular requirements for electrically heated rinsing sinks for public catering establishments | |
307 | Articles 4 and 5 | ГОСТ IEC 60335-2-65-2012 | Safety of household and similar electrical appliances. Part 2-65. Particular requirements for air-cleaning appliances | |
308 | СТБ IEC 60335-2-65-2011 | Household and similar electrical appliances. Safety. Part 2-65. Additional requirements for air-cleaning appliances | applies until 01.06.2017 | |
309 | Articles 4 and 5 | ГОСТ IEC 60335-2-66-2013 | Safety of household and similar electrical appliances. Part 2-66. Particular requirements for water-bed heaters | |
310 | Articles 4 and 5 | ГОСТ IEC 60335-2-70-2015 | Safety of household and similar electrical appliances. Additional requirements for milking machines | |
311 | ГОСТ IEC 60335-2-70-2011 | Safety of household and similar electrical appliances. Additional requirements for milking machines | applies until 01.01.2018 | |
312 | СТБ IEC 60335-2-70-2013 | Household and similar electrical appliances. Safety. Part 2-70. Additional requirements for milking machines | applies until 01.01.2018 | |
313 | Articles 4 and 5 | ГОСТ IEC 60335-2-71-2013 | Safety of household and similar electrical appliances. Part 2-71. Particular requirements for electrical heating appliances for breeding and rearing animals | |
314 | Articles 4 and 5 |
ГОСТ Р 52161.2.73-2011 | Safety of household and similar electrical appliances. Part 2.73. Particular requirements for fixed immersion heaters | |
315 | Articles 4 and 5 | ГОСТ IEC 60335-2-74-2012 | Safety of household and similar electrical appliances. Part 2-74. Particular requirements for portable immersion heaters | |
316 | Articles 4 and 5 | ГОСТ IEC 60335-2-75-2013 | Safety of household and similar electrical appliances. Part 2-75. Particular requirements for dispensing appliances and vending machines for public catering establishments | |
317 | Articles 4 and 5 | ГОСТ IEC 60335-2-76-2013 | Safety of household and similar electrical appliances. Part 2-76. Particular requirements for electric fence energizers | |
318 | Articles 4 and 5 | ГОСТ IEC 60335-2-77-2011 | Safety of household and similar electrical appliances. Additional requirements for hand-controlled lawnmowers and test methods | |
319 | Articles 4 and 5 | ГОСТ IEC 60335-2-78-2013 | Safety of household and similar electrical appliances. Part 2-78. Particular requirements for outdoor barbecues | |
320 | Articles 4 and 5 | ГОСТ IEC 60335-2-79-2014 | Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high-pressure cleaners and steam cleaners | |
321 | Articles 4 and 5 | ГОСТ IEC 60335-2-80-2012 | Safety of household and similar electrical appliances. Part 2.80. Particular requirements for fans | |
322 | Articles 4 and 5 | ГОСТ IEC 60335-2-81-2013 | Safety of household and similar electrical appliances. Part 2-81. Additional requirements for foot warmers and heating mats | |
323 | Articles 4 and 5 | СТБ IEC 60335-2-82-2011 | Household and similar electrical appliances. Safety. Part 2-82. Additional requirements for amusement machines and self-service machines | |
324 | Articles 4 and 5 | ГОСТ IEC 60335-2-83-2013 | Safety of household and similar electrical appliances. Part 2-83. Additional requirements for heated gullies for roof drainage | |
325 | Articles 4 and 5 | ГОСТ IEC 60335-2-84-2013 | Safety of household and similar electrical appliances. Part 2-84. Particular requirements for toilets | |
326 | Articles 4 and 5 | ГОСТ IEC 60335-2-85-2012 | Safety of household and similar electrical appliances. Part 2.85. Particular requirements for fabric steamers | |
327 | Articles 4 and 5 | ГОСТ IEC 60335-2-86-2015 | Household and similar electrical appliances. Safety. Part 2-86. Additional requirements for electric fishing machines | |
328 | Articles 4 and 5 | ГОСТ IEC 60335-2-87-2015 | Safety of household and similar electrical appliances. Part 2-87. Particular requirements for electrical equipment for stunning livestock | |
329 | ГОСТ МЭК 60335-2-87-2004 | Safety of household and similar electrical appliances. Part 2-87. Additional requirements for electrical equipment for stunning livestock | applies until 01.01.2018 | |
330 | Articles 4 and 5 | ГОСТ IEC 60335-2-88-2013 | Safety of household and similar electrical appliances. Part 2-88. Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems | |
331 | Articles 4 and 5 | ГОСТ IEC 60335-2-89-2013 | Safety of household and similar electrical appliances. Part 2-89. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor for catering establishments | |
332 | Articles 4 and 5 | ГОСТ IEC 60335-2-90-2013 | Safety of household and similar electrical appliances. Part 2-90. Particular requirements for microwave ovens for catering establishments | |
333 | Articles 4 and 5 | ГОСТ МЭК 60335-2-92-2004 | Safety of household and similar electrical appliances. Part 2-92. Additional requirements for pedestrian-controlled lawn scarifiers and aerators | |
334 | Articles 4 and 5 | ГОСТ МЭК 60335-2-94-2004 | Safety of household and similar electrical appliances. Part 2-94. Additional requirements for scissors-type grass shears |
335 | Articles 4 and 5 | GOST IEC 60335-2-95-2013 | Safety of household and similar electrical appliances. Part 2-95. Particular requirements for drives for vertically moving garage doors used in residential areas | |
336 | Articles 4 and 5 | GOST IEC 60335-2-96-2012 | Safety of household and similar electrical appliances. Part 2-96. Particular requirements for flexible sheet heating elements for heating residential premises | |
337 | Articles 4 and 5 | GOST IEC 60335-2-97-2013 | Safety of household and similar electrical appliances. Part 2-97. Particular requirements for drives for opening rolling shutters, awnings, blinds and similar equipment | |
338 | Articles 4 and 5 | GOST IEC 60335-2-98-2012 | Safety of household and similar electrical appliances. Part 2-98. Additional requirements for air humidifiers | |
339 | Articles 4 and 5 | GOST IEC 60335-2-101-2013 | Safety of household and similar electrical appliances. Part 2-101. Particular requirements for vaporizers | |
340 | Articles 4 and 5 | GOST IEC 60335-2-102-2014 | Household and similar electrical appliances. Safety. Part 2-102. Additional requirements for appliances operating on gaseous, liquid and solid fuels and having electrical connections | |
341 | Articles 4 and 5 | GOST IEC 60335-2-103-2013 | Safety of household and similar electrical appliances. Part 2-103. Particular requirements for drives for gates, doors and windows | |
342 | Articles 4 and 5 | GOST IEC 60335-2-104-2013 | Household and similar electrical appliances. Safety. Part 2-104. Additional requirements for appliances intended to recover and/or recycle refrigerant from air-conditioning and refrigeration equipment | |
343 | STB IEC 60335-2-104-2011 | Household and similar electrical appliances. Safety. Part 2-104. Additional requirements for appliances intended to recover and/or recycle refrigerant from air-conditioning and refrigeration equipment | applies until 01.06.2017 | |
344 | Articles 4 and 5 | GOST IEC 60335-2-105-2015 | Household and similar electrical appliances. Safety. Part 2-105. Additional requirements for multifunctional shower cabinets | |
345 | Articles 4 and 5 | GOST IEC 60335-2-106-2013 | Electrical appliances for household and similar purposes. Safety. Part 2-106. Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings | |
346 | Articles 4 and 5 | GOST IEC 60335-2-108-2014 | Household and similar electrical appliances. Safety. Part 2-108. Additional requirements for electrolysers | |
347 | Articles 4 and 5 | GOST IEC 60335-2-109-2013 | Safety of household and similar electrical appliances. Part 2-109. Particular requirements for UV radiation water treatment appliances | |
348 | paragraphs first – fourth, | GOST IEC 60358-1-2014 | Coupling capacitors and capacitor dividers. Part 1. General rules | |
349 |
sixth, seventh | ST RK IEC 60358-2012 | Coupling capacitors and capacitor dividers | applies until 01.06.2017 |
350 |
paragraphs | GOST IEC 60360-2012 | Standard method of measurement of lamp cap temperature rise | |
351 | STB 1174-99 (IEC 60360:1987) | Standard method of measurement of lamp cap temperature rise | applies until 01.06.2017 | |
352 |
paragraphs | GOST IEC 60400-2011 | Lampholders for tubular fluorescent lamps and starterholders | |
353 |
paragraphs | GOST 31998.1-2012 | Safety requirements for incandescent lamps. Part 1. Tungsten filament lamps for domestic and similar general lighting purposes | |
354 | STB IEC 60432-1-2008 | Incandescent lamps. Safety requirements. Part 1. Tungsten filament lamps for domestic and similar general lighting purposes | ||
355 |
paragraphs | GOST IEC 60432-2-2011 | Safety requirements for incandescent lamps. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes | |
356 | STB IEC 60432-2-2008 | Incandescent lamps. Safety requirements. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes | applies until 01.06.2017 | |
357 |
paragraphs |
GOST R | Incandescent lamps. Safety requirements. Part 3. Tungsten halogen lamps (non-vehicle) | |
358 |
paragraphs | STB IEC 60439-1-2007 | Low-voltage switchgear and controlgear assemblies. Part 1. Type-tested and partially type-tested assemblies | |
359 |
GOST R 51321.1-2007 | Low-voltage switchgear and controlgear assemblies. Part 1. Fully or partially tested assemblies. General technical requirements and test methods | ||
360 |
paragraphs | STB IEC 60439-2-2007 | Low-voltage switchgear and controlgear assemblies. Part 2. Additional requirements for busbar trunking systems (busways) | |
361 |
GOST R 51321.2-2009 | Low-voltage switchgear and controlgear assemblies. Part 2. Additional requirements for busbar trunking systems | ||
362 |
paragraphs | GOST IEC 60439-3-2012 | Low-voltage switchgear and controlgear assemblies. Part 3. Additional requirements for switchgear and controlgear assemblies intended for use in locations accessible to unskilled persons, and test methods | |
363 | STB IEC 60439-3-2007 | Low-voltage switchgear and controlgear assemblies. Part 3. Additional requirements for low-voltage switching and control devices intended to be installed in places accessible for use by unskilled persons. Distribution boards | applies until 01.06.2017 | |
364 |
paragraphs | GOST IEC 60439-4-2013 | Low-voltage switchgear and controlgear assemblies. Part 4. Additional requirements for assemblies for construction sites | |
365 | STB IEC 60439-4-2007 | Low-voltage switchgear and controlgear assemblies. Part 4. Additional requirements for assemblies for construction sites | applies until 01.06.2017 | |
366 |
GOST R 51321.4-2011 | Low-voltage switchgear and controlgear assemblies. Part 4. Particular requirements for assemblies for construction sites (NKU SP) | applies until 01.06.2017 | |
367 | paragraph twelve of Article 4, Article 5 |
GOST R | Basic and safety principles for the "man-machine" interface, marking and identification. Identification of conductors by colours and alphanumerics | |
368 |
paragraphs | GOST IEC 60477-2013 | Laboratory DC resistors | |
369 |
paragraphs | GOST IEC 60477-2-2013 | Laboratory resistance standards. Part 2. Laboratory AC resistance standards | |
370 | Article 4 | ST RK IEC 60502-1-2012 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1, 2kV) up to 30 kV (Um=36kV). Part 1. Cables for rated voltages of 1 kV (Um=1, 2kV) and 3 kV (Um=3, 6kV) | |
371 | STB IEC 60502-1-2012 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV). Part 1. Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | ||
372 |
paragraphs | GOST IEC 60519-1-2011 | Safety in electroheat installations. Part 1. General requirements | |
373 |
paragraphs |
GOST 31636.2-2012 | Safety in electroheat installations. Part 2. Particular requirements for resistance heating installations | |
374 |
paragraphs |
GOST 31636.3-2012 | Safety in electroheat installations. Part 3. Particular requirements for induction and direct resistance heating electroheat installations and induction furnaces | |
375 |
paragraphs | GOST IEC 60519-4-2015 | Safety in electroheat installations. Part 4. Particular requirements for arc furnace installations | |
376 |
paragraphs |
GOST R | Safety in electroheat installations. Part 6. Safety specifications for industrial microwave heating equipment | |
377 |
paragraphs |
GOST 31636.7-2012 | Safety in electroheat installations. Part 7. Particular requirements for electron beam furnaces | |
378 |
paragraphs | GOST IEC 60519-8-2015 | Electroheating installations. Safety. Part 8. Particular requirements for electroslag remelting furnaces | |
379 |
paragraphs |
GOST R | Safety in electroheat installations. Part 9. Particular requirements for high-frequency dielectric heating installations | |
380 |
paragraphs | GOST IEC 60519-10-2015 | Electroheating installations. Safety. Part 10. Particular requirements for electrical resistance heating systems for industrial and commercial applications | |
381 |
paragraphs | GOST IEC 60519-21-2015 | Electroheating installations. Safety. Part 21. Particular requirements for resistance heating installations. Heating and melting glass equipment | |
382 |
paragraphs | GOST IEC 60523-2014 | DC potentiometers | |
383 |
paragraphs | GOST 11282-93 (IEC 524-75) | DC resistive voltage dividers | |
384 | paragraphs one, three, | GOST 14254-2015 (IEC 60529:2013) | Degrees of protection provided by enclosures (IP Code) | |
385 |
seven | GOST 14254-96 (IEC 529-89) | Degrees of protection provided by enclosures (IP Code) | applies until 01.01.2018 |
386 |
paragraphs | GOST 7165-93 (IEC 564-77) | DC bridges for resistance measurement | |
387 |
paragraphs | GOST IEC 60570-2012 | Electrical supply track systems for luminaires | |
388 | GOST IEC 60570-2-1-2011 | Electrical supply track systems for luminaires. Part 2. Combination supply track systems. Section 1. Supply track systems of classes I and II | applies until 01.06.2017 | |
389 |
paragraphs | GOST IEC 60598-1-2013 | Luminaires. Part 1. General requirements and tests | |
390 |
paragraphs | GOST IEC 60598-2-1-2011 | Luminaires. Part 2. Particular requirements. Section 1. Fixed general purpose luminaires | |
391 | STB IEC 598-2-1-99 | Luminaires. Part 2. Particular requirements. Section 1. Fixed general purpose luminaires | applies until 01.06.2017 | |
392 |
paragraphs | GOST IEC 60598-2-2-2012 | Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires | |
393 | STB IEC 60598-2-2-99 | Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires | applies until 01.06.2017 | |
394 | paragraphs one to four and | GOST IEC 60598-2-3-2012 | Luminaires. Part 2. Particular requirements. Section 3. Luminaires for road and street lighting | |
395 | six to twelve of Article 4, Article 5 | STB IEC 60598-2-3-2009 | Luminaires. Part 2-3. Particular requirements for luminaires for road and street lighting | |
396 |
paragraphs | GOST IEC 60598-2-4-2012 | Luminaires. Part 2. Particular requirements. Section 4. Portable general purpose luminaires | |
397 | STB IEC 60598-2-4-99 | Luminaires. Part 2. Particular requirements. Section 4. Portable general purpose luminaires | applies until 01.06.2017 | |
398 |
paragraphs | GOST IEC 60598-2-5-2012 | Luminaires. Part 2. Particular requirements. Section 5. Floodlights | |
399 | STB IEC 60598-2-5-2002 | Luminaires. Part 2. Particular requirements. Section 5. Floodlights | applies until 01.06.2017 | |
400 |
paragraphs | GOST IEC 60598-2-6-2012 | Luminaires. Part 2. Particular requirements. Section 6. Luminaires with built-in transformers or converters for filament lamps | |
401 | STB IEC 60598-2-6-2002 | Luminaires. Part 2. Particular requirements. Section 6. Luminaires with built-in transformers or converters for filament lamps | applies until 01.06.2017 | |
402 |
paragraphs | GOST IEC 60598-2-7-2011 | Luminaires. Part 2. Particular requirements. Section 7. Portable luminaires for garden use | |
403 | STB IEC 60598-2-7-2002 | Luminaires. Part 2. Particular requirements. Section 7. Portable luminaires for garden use | applies until 01.06.2017 | |
404 |
paragraphs | GOST IEC 60598-2-8-2011 | Luminaires. Part 2. Particular requirements. Section 8. Handlamps | |
405 | STB IEC 60598-2-8-2002 | Luminaires. Part 2. Particular requirements. Section 8. Handlamps | applies until 01.06.2017 | |
406 |
paragraphs | GOST IEC 60598-2-9-2011 | Luminaires. Part 2. Particular requirements. Section 9. Photo and film luminaires (non-professional) | |
407 | STB IEC 60598-2-9-2003 | Luminaires. Part 2. Particular requirements. Section 9. Photo and film luminaires (non-professional) | applies until 01.06.2017 | |
408 |
paragraphs | GOST IEC 60598-2-10-2012 | Luminaires. Part 2-10. Particular requirements. Portable luminaires for children | |
409 | STB IEC 60598-2-10-2003 | Luminaires. Part 2. Particular requirements. Section 10. Portable play luminaires for children | applies until 01.06.2017 | |
410 |
paragraphs | GOST R IEC 60598-2-11-2010 | Luminaires. Part 2-11. Particular requirements. Aquarium luminaires | |
411 |
paragraphs | STB IEC 60598-2-12-2009 | Luminaires. Part 2-12. Additional requirements for night lights mounted in mains socket-outlets | |
412 |
paragraphs | GOST IEC 60598-2-13-2011 | Luminaires. Part 2-13. Particular requirements. Ground-recessed luminaires | |
413 |
paragraphs | GOST IEC 60598-2-14-2014 | Luminaires. Part 2-14. Additional requirements. Luminaires for cold-cathode tubular discharge lamps (neon lamps) and similar equipment | |
414 |
paragraphs | GOST IEC 60598-2-17-2011 | Luminaires. Part 2. Particular requirements. Section 17. Luminaires for indoor and outdoor lighting of stages and television, film and photographic studios | |
415 | STB IEC 598-2-17-2002 | Luminaires. Part 2. Particular requirements. Section 17. Luminaires for indoor and outdoor lighting of stages and television, film and photographic studios | applies until 01.06.2017 |
416 | paragraphs one to four and | GOST IEC 60598-2-19-2012 | Luminaires. Part 2. Particular requirements. Section 19. Ventilated luminaires. Safety requirements | |
417 | six to twelve of Article 4, Article 5 | STB IEC 60598-2-19-2003 | Luminaires. Part 2. Particular requirements. Section 19. Ventilated luminaires. Safety requirements | applies until 01.06.2017 |
418 |
paragraphs | GOST IEC 60598-2-20-2012 | Luminaires. Part 2-20. Particular requirements. Lighting chains | |
419 |
paragraphs | GOST IEC 60598-2-22-2012 | Luminaires. Part 2. Particular requirements. Section 22. Luminaires for emergency lighting | |
420 | STB IEC 60598-2-22-2011 | Luminaires. Part 2-22. Additional requirements. Luminaires for emergency lighting | ||
421 |
paragraphs | GOST IEC 60598-2-23-2012 | Luminaires. Part 2. Particular requirements. Section 23. Extra-low-voltage lighting systems for incandescent lamps | |
422 | STB IEC 60598-2-23-2002 | Luminaires. Part 2. Particular requirements. Section 23. Extra-low-voltage lighting systems for incandescent lamps | ||
423 |
paragraphs | GOST IEC 60598-2-24-2011 | Luminaires. Part 2-24. Particular requirements. Luminaires with limited surface temperature | |
424 | STB IEC 60598-2-24-2002 | Luminaires. Part 2-24. Luminaires with limited surface temperature | applies until 01.06.2017 | |
425 |
paragraphs | GOST IEC 60598-2-25-2011 | Luminaires. Part 2. Particular requirements. Section 25. Luminaires for use in clinical areas of hospitals and other medical institutions | |
426 | STB IEC 60598-2-25-2002 | Luminaires. Part 2. Particular requirements. Section 25. Luminaires for use in clinical areas of hospitals and other medical institutions | applies until 01.06.2017 | |
427 |
paragraphs | GOST IEC 60618-2013 | Inductive voltage dividers | |
428 |
paragraphs | GOST IEC 60664-3-2015 | Insulation coordination for equipment of low-voltage systems. Part 3. Use of coating, potting and moulding for protection against pollution | |
429 |
paragraphs | GOST IEC 60664-5-2013 | Insulation coordination for equipment within low-voltage systems. Part 5. Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm | |
430 |
paragraphs | STB IEC 60645-1-2014 | Electroacoustics. Audiometric equipment. Part 1. Pure-tone audiometers | |
431 |
paragraphs |
GOST R | High-pressure sodium lamps. Performance requirements | |
432 |
paragraphs | GOST R IEC 60664.1-2012 | Insulation coordination for equipment within low-voltage systems. Part 1. Principles, requirements and tests | |
433 | paragraphs one to four and six to twelve | GOST 30850.1-2002 | Switches for household and similar fixed electrical installations. Part 1. General requirements and test methods | |
434 | of Article 4, Article 5 |
GOST R 51324.1-2012 | Switches for household and similar fixed electrical installations. Part 1. General requirements and test methods | |
435 |
paragraphs | GOST 30850.2.1-2002 | Switches for household and similar fixed electrical installations. Part 2-1. Additional requirements for semiconductor switches and test methods | |
436 |
GOST R 51324.2.1-2012 | Switches for household and similar fixed electrical installations. Part 2-1. Additional requirements for semiconductor switches | ||
437 |
paragraphs | GOST 30850.2.2-2002 | Switches for household and similar fixed electrical installations. Part 2-2. Additional requirements for remote-control switches (RCS) and test methods | |
438 |
GOST R 51324.2.2-2012 | Switches for household and similar fixed electrical installations. Part 2-2. Additional requirements for remote-control switches (RCS) | ||
439 |
paragraphs | GOST 30850.2.3-2002 | Switches for household and similar fixed electrical installations. Part 2-3. Additional requirements for time-delay switches (timers) and test methods | |
440 |
GOST R 51324.2.3-2012 | Switches for household and similar fixed electrical installations. Part 2-3. Additional requirements for time-delay switches (timers) | ||
441 |
paragraphs | GOST IEC 60669-2-6-2015 | Switches for household and similar fixed electrical installations. Part 2-6. Additional requirements for emergency switches for exterior and interior lighting devices | |
442 |
paragraphs |
GOST 32126.1-2013 | Boxes and enclosures for electrical accessories installed in household and similar fixed electrical installations. Part 1. General requirements | |
443 |
paragraphs | GOST IEC 60670-21-2013 | Boxes and enclosures for electrical accessories installed in household and similar fixed electrical installations. Part 21. Special requirements for boxes and enclosures equipped with means for attaching suspension devices | |
444 |
paragraphs |
GOST R | Boxes and enclosures for electrical accessories installed in household and similar fixed electrical installations. Part 22. Special requirements for connecting boxes and enclosures | |
445 |
paragraphs |
GOST 32126.23-2013 | Boxes and enclosures for electrical accessories installed in household and similar fixed electrical installations. Part 23. Special requirements for floor boxes and enclosures | |
446 |
paragraphs | GOST IEC 60670-24-2013 | Boxes and enclosures for electrical devices installed in fixed electrical installations for household and similar purposes. Part 24. Additional requirements for enclosures for housing protective devices and other electrical equipment with dissipated power | |
447 |
GOST R | Boxes and enclosures for electrical accessories installed in fixed electrical installations for household and similar purposes. Part 24. Particular requirements for boxes and enclosures intended for housing protective and similar devices with high dissipated power | applicable until 01.06.2017 | |
448 |
paragraphs | GOST IEC 60691-2012 | Thermal-links. Requirements and application guide | |
449 |
paragraphs | GOST R IEC 60695-1-1-2003 | Fire hazard testing. Part 1-1. Guidance for assessing the fire hazard of electrotechnical products. General guidelines | |
450 |
paragraphs | STB IEC 60695-2-10-2008 | Fire hazard testing. Part 2-10. Glow-wire test methods. Apparatus and general test procedure | |
451 | GOST R IEC 60695-2-10-2011 | Fire hazard testing. Part 2-10. Basic glow-wire test methods. Glow-wire test apparatus and general test procedures | ||
452 |
paragraphs | GOST IEC 60695-2-11-2013 | Fire hazard testing. Part 2-11. Basic glow-wire test methods. Glow-wire flammability test for end products | |
453 | STB IEC 60695-2-11-2008 | Fire hazard testing. Part 2-11. Glow-wire test methods. Flammability test of finished products | applicable until 01.06.2017 | |
454 |
paragraphs | GOST IEC 60695-2-12-2015 | Fire hazard testing. Part 2-12. Glow-wire test methods. Method for determining the glow-wire flammability index (GWFI) of materials | |
455 | STB IEC 60695-2-12-2008 | Fire hazard testing. Part 2-12. Glow-wire test methods. Flammability test of materials | applicable until 01.01.2018 | |
456 |
Section 6 | Fire hazard testing. Test methods. Hot-wire tests | applicable until 01.01.2018 | |
457 |
paragraphs | GOST IEC 60695-2-13-2012 | Fire hazard testing. Part 2-13. Glowing/hot-wire test methods. Method for determining the glow-wire ignition temperature (GWIT) of materials | |
458 |
paragraphs | GOST IEC 60695-10-2-2013 | Fire hazard testing. Part 10-2. Excessive heat. Ball pressure test | |
459 | STB IEC 60695-10-2-2008 | Fire hazard testing. Part 10-2. Abnormal heat. Ball indentation test method | applicable until 01.06.2017 | |
460 |
paragraphs | STB IEC/TS 60695-11-4-2008 | Fire hazard testing. Part 11-4. 50 W test flame. Apparatus and test method for proof of conformity | |
461 |
paragraphs | GOST IEC 60695-11-5-2013 | Fire hazard testing. Part 11-5. Needle-flame test method. Apparatus, guidance and procedure for proof-of-conformity testing | |
462 |
paragraphs | STB IEC 60695-11-10-2008 | Fire hazard testing. Part 11-10. Horizontal and vertical burning test methods using a 50 W flame | |
463 |
paragraphs one, | GOST IEC 60719-2002 | Cables with circular copper conductors for rated voltages up to and including 450/750 V. Calculation of the lower and upper limits for average outer dimensions | |
464 | GOST R IEC 60719-99 | Cables with circular copper conductors for rated voltages up to and including 450/750 V. Calculation of the lower and upper limits for average outer dimensions | applicable until 01.06.2017 | |
465 |
paragraphs one – three, six, eight, | GOST IEC 60728-11-2014 | Cable networks for sound and television signals and interactive services. Part 11. Safety | |
466 |
paragraphs one – three, six, eight, | GOST IEC 60730-1-2016 | Automatic electrical controls for household and similar use. Part 1. General requirements | |
467 | GOST IEC 60730-1-2011 | Automatic electrical controls for household and similar use. General requirements and test methods | applicable until 01.06.2017 | |
468 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-2-2011 | Automatic electrical controls for household and similar use. Part 2-2. Particular requirements for thermal motor protectors | |
469 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-3-2014 | Automatic electrical controls for household and similar use. Part 2-3. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | |
470 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-4-2011 | Automatic electrical controls for household and similar use. Part 2-4. Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type and test methods | |
471 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-5-2012 | Automatic electrical controls for household and similar use. Part 2-5. Additional requirements for automatic electrical burner control systems | |
472 |
paragraphs one – three, six, eight, | GOST IEC 60730-2-6-2014 | Automatic electrical controls for household and similar use. Part 2-6. Particular requirements for automatic electrical controls, pressure sensors, including requirements for mechanical characteristics | |
473 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-7-2011 | Automatic electrical controls for household and similar use. Part 2-7. Particular requirements for timers and time switches | |
474 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-8-2012 | Automatic electrical controls for household and similar use. Part 2-8. Additional requirements for electrically operated water valves, including requirements for mechanical characteristics | |
475 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-9-2011 | Automatic electrical controls for household and similar use. Part 2-9. Particular requirements for temperature sensing controls and test methods | |
476 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-10-2013 | Automatic electrical controls for household and similar use. Part 2-10. Particular requirements for motor starting relays | |
477 |
paragraphs one to three, six, eight, |
GOST 32128.2.11-2013 | Automatic electrical controls for household and similar use. Part 2-11. Particular requirements for energy regulators | |
478 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-12-2012 | Automatic electrical controls for household and similar use. Part 2-12. Additional requirements for electrically operated door locks | |
479 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-13-2015 | Automatic electrical controls for household and similar use. Part 2-13. Particular requirements for humidity sensing controls | |
480 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-14-2012 | Automatic electrical controls for household and similar use. Part 2-14. Additional requirements for electric actuators | |
481 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-15-2013 | Automatic electrical controls for household and similar use. Part 2-15. Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
482 |
GOST R 53994.2.15-2011 | Automatic electrical controls for household and similar use. Part 2.15. Particular requirements for automatic electrical air flow, water flow and water level sensing controls | applies until 01.06.2017 | |
483 |
paragraphs one to three, six, eight, | GOST IEC 60730-2-19-2012 | Automatic electrical controls for household and similar use. Part 2-19. Particular requirements for electrically operated oil valves, including mechanical requirements | |
484 |
paragraphs | GOST IEC 60745-1-2011 | Hand-held electric machinery. Safety and test methods. Part 1. General requirements | |
485 | GOST R IEC 60745-1-2009 | Hand-held electric machinery. Safety and test methods. Part 1. General requirements | ||
486 | STB IEC 60745-1-2012 | Hand-held motor-operated electric tools. Safety. Part 1. General requirements | ||
487 |
paragraphs | GOST IEC 60745-2-1-2014 | Hand-held electric machinery. Safety and test methods. Part 2-1. Particular requirements for drills and impact drills | |
488 | GOST IEC 60745-2-1-2011 | Hand-held electric machinery. Safety and test methods. Part 2-1. Particular requirements for drills and impact drills | applies until 01.06.2017 |
489 |
paragraphs | GOST IEC 60745-2-2-2011 | Hand-held electric machinery. Safety and test methods. Part 2-2. Particular requirements for screwdrivers and impact wrenches | |
490 |
paragraphs | GOST R IEC 60745-2-3-2011 | Hand-held electric machinery. Safety and test methods. Part 2-3. Particular requirements for grinders, disc-type sanders and polishers with a rotating working tool | |
491 |
paragraphs | GOST IEC 60745-2-4-2011 | Hand-held electric machinery. Safety and test methods. Part 2-4. Particular requirements for surface sanders and belt sanders | |
492 |
paragraphs | GOST IEC 60745-2-5-2014 | Hand-held electric machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | |
493 | GOST IEC 60745-2-5-2011 | Hand-held electric machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | applies until 01.06.2017 | |
494 |
paragraphs | GOST IEC 60745-2-6-2014 | Hand-held electric machinery. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers | |
495 | GOST IEC 60745-2-6-2011 | Hand-held electric machinery. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers | applies until 01.06.2017 | |
496 |
paragraphs | GOST 30700-2000 (IEC 745-2-7-89) | Hand-held electric machinery. Particular safety requirements and test methods for spray guns for non-flammable liquids | |
497 |
paragraphs |
GOST IEC |
Hand-held electric machinery. Safety and test | |
498 |
paragraphs |
GOST IEC |
Hand-held electric machinery. Safety and test | |
499 |
paragraphs |
GOST IEC |
Hand-held electric machinery. Safety and test | |
500 |
paragraphs |
GOST IEC |
Hand-held electric machinery. Safety and test | |
501 |
GOST R IEC |
Hand-held electric machinery. Safety and test |
applies | |
502 |
paragraphs |
GOST 30506-97 |
Hand-held electric machinery. Particular safety | |
503 |
GOST R IEC |
Hand-held electric machinery. Safety and test | ||
504 |
paragraphs |
GOST IEC |
Hand-held electric machinery. Safety and test | |
505 | of Article 4, Article 5 | GOST IEC 60745-2-14-2011 | Hand-held electric machinery. Safety and test methods.Part 2-14. Particular requirements for planers | applies until 01.04.2017 |
506 |
paragraphs |
GOST 30505-97 | Hand-held electric machinery. Particular safety requirements and test methods for hedge trimmers and grass shears | |
507 | GOST R IEC 60745-2-15-2012 | Hand-held electric machinery. Safety and test methods. Part 2-15. Particular requirements for hedge trimmers | ||
508 |
paragraphs |
GOST 30701-2001 | Hand-held electric machinery. Particular safety requirements and test methods for tackers | |
509 | GOST R IEC 60745-2-16-2012 | Hand-held electric machinery. Safety and test methods. Part 2-16. Particular requirements for tackers | ||
510 |
paragraphs | GOST IEC 60745-2-17-2014 | Hand-held electric machinery. Safety and test methods. Part 2-17. Particular requirements for hand-held routers and edge trimmers | |
511 | GOST R IEC 60745-2-17-2010 | Hand-held electric machinery. Safety and test methods. Part 2-17. Particular requirements for hand-held routers and edge trimmers | applies until 01.04.2017 | |
512 |
paragraphs | GOST IEC 60745-2-18-2014 | Hand-held electric machinery. Safety and test methods. Part 2-19. Particular requirements for strapping tools | |
513 |
paragraphs | GOST IEC 60745-2-19-2014 | Hand-held electric machinery. Safety and test methods. Part 2-19. Particular requirements for biscuit jointers | |
514 |
paragraphs | GOST R IEC 60745-2-20-2011 | Hand-held electric machinery. Safety and test methods. Part 2-20. Particular requirements for band saws | |
515 |
paragraphs | GOST IEC 60745-2-21-2014 | Hand-held electric machinery. Safety and test methods. Part 2-21. Particular requirements for drain cleaners | |
516 |
paragraphs | GOST IEC 60745-2-22-2014 | Hand-held electric machinery. Safety and test methods. Part 2-22. Particular requirements for cut-off machines | |
517 |
paragraphs | GOST IEC 60799-2011 | Electrical accessories. Cord sets and interconnection cord sets | |
518 | Article 4 | GOST R IEC 60800-2012 | Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation | |
519 |
paragraphs | GOST IEC 60811-1-1-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Measurement of thickness and overall dimensions. Methods for determining mechanical properties | |
520 | STB IEC 60811-1-1-2009 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-1. Methods for general application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties | ||
521 | ST RK IEC 60811-1-1-2009 | Insulating and sheathing materials of electric and optical cables. Common test methods. Part 1. Methods for general application. Section 1. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties | ||
522 |
paragraphs | GOST IEC 60811-1-2-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods | |
523 | STB IEC 60811-1-2-2008 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods | ||
524 |
paragraphs | GOST IEC 60811-1-3-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. Methods for general application. Methods for determining the density. Water absorption tests. Shrinkage test | |
525 | STB IEC 60811-1-3-2008 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application. Methods for determining the density. Water absorption tests. Shrinkage test | ||
526 |
paragraphs | GOST IEC 60811-1-4-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Test at low temperature | |
527 | STB IEC 60811-1-4-2009 | General test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Tests at low temperature | ||
528 |
paragraphs | GOST IEC 60811-2-1-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Special test methods for elastomeric compounds. Ozone resistance, thermal deformation and oil resistance tests | |
529 |
paragraphs | GOST IEC 60811-3-1-2011 | Special test methods for polyvinyl chloride insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking | |
530 | STB IEC 60811-3-1-2011 | Insulating and sheathing materials of electric and optical cables. Common test methods. Part 3-1. Special test methods for polyvinyl chloride compounds. Pressure test at high temperature. Test for resistance to cracking | ||
531 |
paragraphs | GOST IEC 60811-3-2-2011 | Special test methods for polyvinyl chloride insulating and sheathing compounds of electric and optical cables. Determination of loss of mass. Thermal stability test | |
532 | STB IEC 60811-3-2-2011 | Insulating and sheathing materials of electric and optical cables. Common test methods. Part 3-2. Special test methods for polyvinyl chloride compounds. Loss of mass test. Thermal stability test | ||
533 |
paragraphs | GOST IEC 60811-4-1-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Special test methods for polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Determination of carbon black and/or mineral filler content in polyethylene by direct combustion. Determination of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope | |
534 |
paragraphs | GOST IEC 60811-4-2-2011 | General test methods for insulating and sheathing materials of electric and optical cables. Part 4-2. Special test methods for polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term thermal stability test. Test method for copper-catalyzed oxidative degradation | |
535 |
paragraphs | GOST IEC 60811-5-1-2011 | Special test methods for filling compounds of electric cables. Drop point. Oil separation. Brittleness at low temperature. Total acid number. Absence of corrosive components. Permittivity at 23 °C. Electrical resistivity at 23 and 100 °C | |
536 |
paragraphs | GOST IEC 60811-100-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 100. General | |
537 |
paragraphs | GOST IEC 60811-201-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 201. General tests. Measurement of insulation thickness | |
538 |
paragraphs | GOST IEC 60811-202-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 202. General tests. Measurement of thickness of non-metallic sheath | |
539 |
paragraphs | GOST IEC 60811-203-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 203. General tests. Measurement of overall dimensions | |
540 |
paragraphs | GOST IEC 60811-301-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 301. Electrical tests. Measurement of the permittivity of filling compounds at 23 °C | |
541 |
paragraphs | GOST IEC 60811-302-2015 |
Electric and optical fibre cables. Test methods for non-metallic materials. Part 302. Electrical tests. Measurement of the DC resistivity of filling compounds at | |
542 |
paragraphs | GOST IEC 60811-401-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven | |
543 |
paragraphs | GOST IEC 60811-402-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 402. Miscellaneous tests. Water absorption tests | |
544 |
paragraphs | GOST IEC 60811-403-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Miscellaneous tests. Ozone resistance test of cross-linked compounds | |
545 |
paragraphs | GOST IEC 60811-404-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 404. Miscellaneous tests. Test of cable sheaths for resistance to mineral oil | |
546 |
paragraphs | GOST IEC 60811-405-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 405. Miscellaneous tests. Thermal stability test of cable insulation and sheaths made of polyvinyl chloride compounds | |
547 |
paragraphs | GOST IEC 60811-406-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 406. Miscellaneous tests. Resistance of polyethylene and polypropylene compounds to stress cracking | |
548 |
paragraphs | GOST IEC 60811-407-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds | |
549 |
paragraphs | GOST IEC 60811-408-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 408. Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds | |
550 |
paragraphs | GOST IEC 60811-409-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Miscellaneous tests. Loss of mass test for thermoplastic insulation and sheaths | |
551 |
paragraphs | GOST IEC 60811-410-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 410. Miscellaneous tests. Test method for copper-catalysed oxidative degradation of polyolefin-insulated conductors | |
552 |
paragraphs | GOST IEC 60811-411-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 411. Miscellaneous tests. Low-temperature brittleness of filling compounds | |
553 |
paragraphs | GOST IEC 60811-412-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb | |
554 |
paragraphs | GOST IEC 60811-501-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 501. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds | |
555 |
paragraphs | GOST IEC 60811-502-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulation | |
556 |
paragraphs | GOST IEC 60811-503-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths | |
557 |
paragraphs | GOST IEC 60811-504-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Low-temperature bending tests for insulation and sheaths | |
558 |
paragraphs | GOST IEC 60811-505-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Low-temperature elongation tests for insulation and sheaths |
559 |
paragraphs | GOST IEC 60811-506-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test of insulation and sheaths at low temperature | |
560 |
paragraphs | GOST IEC 60811-507-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials | |
561 |
paragraphs | GOST IEC 60811-508-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths | |
562 |
paragraphs | GOST IEC 60811-509-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulation and sheaths to cracking (heat shock test) | |
563 |
paragraphs | GOST IEC 60811-510-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 510. Mechanical tests. Special test methods for polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air | |
564 |
paragraphs | GOST IEC 60811-511-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 511. Mechanical tests. Determination of the melt flow index of polyethylene compounds | |
565 |
paragraphs | GOST IEC 60811-512-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 512. Mechanical tests. Special test methods for polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature | |
566 |
paragraphs | GOST IEC 60811-513-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 513. Mechanical tests. Special test methods for polyethylene and polypropylene compounds. Wrapping test after conditioning | |
567 |
Paragraphs first | GOST IEC 60811-601-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 601. Physical tests. Measurement of the drop point of filling compounds | |
568 |
Paragraphs first | GOST IEC 60811-602-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 602. Physical tests. Oil separation of filling compounds | |
569 |
paragraphs | GOST IEC 60811-603-2015 | Electric and optical fibre cables. Test methods for non-metallic materials. Part 603. Physical tests. Determination of the total acid number of filling compounds | |
570 |
Paragraphs first – third, | GOST IEC 60825-1-2013 | Safety of laser equipment. Part 1. Equipment classification, requirements and user's guide | |
571 | STB IEC 60825-1-2011 | Safety of laser products. Part 1. Equipment classification and requirements | applies until 01.06.2017 | |
572 |
paragraphs first, fifth, | GOST IEC 60825-2-2013 | Safety of laser equipment. Part 2. Safety of optical fibre communication systems | |
573 |
paragraph | GOST IEC 60825-4-2014 | Safety of laser equipment. Part 4. Means of protection against laser radiation | |
574 |
paragraphs first, fifth, | GOST IEC 60825-12-2013 | Safety of laser equipment. Part 12. Safety of free space optical communication systems used for transmission of information | |
575 |
paragraphs | GOST IEC 60838-1-2011 | Miscellaneous lampholders. Part 1. General requirements and test methods | |
576 |
paragraphs first, third, fifth, | GOST IEC 60838-2-1-2014 | Miscellaneous lampholders. Part 2-1. Particular requirements for S14 lampholders | |
577 |
paragraphs first, third, fifth, | GOST IEC 60838-2-2-2013 | Lampholders of various types. Part 2-2. Additional requirements. Connectors for light-emitting diode modules | |
578 | GOST R IEC 60838-2-2-2011 | Miscellaneous lampholders. Part 2-2. Particular requirements. Connectors for LED modules | applies until 01.06.2017 | |
579 |
paragraphs first, third, fifth, | GOST IEC 60884-1-2013 | Electrical plug-and-socket connectors for household and similar purposes. Part 1. General requirements and test methods | |
580 |
paragraphs first, third, fifth, |
GOST 30988.2.2-2012 | Electrical plug-and-socket connectors for household and similar purposes. Part 2. Additional requirements for socket-outlets for appliances and test methods | |
581 |
paragraphs first, third, fifth, |
GOST 30988.2.5-2003 | Electrical plug-and-socket connectors for household and similar purposes. Part 2. Additional requirements for plug converters (adaptors) and test methods | |
582 |
paragraphs first, third, fifth, |
GOST 30988.2.6-2012 | Electrical plug-and-socket connectors for household and similar purposes. Part 2-6. Additional requirements for switched socket-outlets with interlock for fixed installations and test methods | |
583 |
paragraphs first, third, fifth, | GOST IEC 60884-2-7-2013 | Electrical plug-and-socket connectors for household and similar purposes. Part 2-7. Additional requirements for cord extension sets | |
584 |
paragraphs |
GOST R | Small-size electrical equipment. Circuit breakers for overcurrent protection for household and similar purposes. Part 1. Circuit breakers for alternating current operation | |
585 |
paragraphs | GOST IEC 60898-2-2011 | Automatic circuit breakers for overcurrent protection of household and similar electrical installations. Part 2. Circuit breakers for AC and DC operation | |
586 |
paragraphs | GOST IEC 60931-1-2013 | Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1000 V. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation | |
587 |
paragraphs |
GOST IEC |
Shunt power capacitors | |
588 |
paragraphs |
GOST IEC |
Shunt power capacitors of the non- | |
589 |
Paragraphs first – third, | GOST IEC 60934-2015 | Circuit breakers for equipment (CBE) | |
590 |
GOST R | Circuit breakers for electrical equipment (CBE) |
applies | |
591 |
paragraphs |
GOST IEC |
Low-voltage switchgear and controlgear. Part 1. | |
592 |
GOST |
Low-voltage switchgear and controlgear. Part 1. |
applies | |
593 |
paragraphs |
GOST IEC |
Low-voltage switchgear and controlgear. Part 2. | |
594 |
GOST R |
Low-voltage switchgear and controlgear. Part 2. |
applies | |
595 |
ST RK IEC |
Low-voltage switchgear and controlgear. Part 2. |
applies | |
596 |
paragraphs |
GOST 30011.3-2002 | Low-voltage switchgear and controlgear. Part 3. Switches, disconnectors, switch-disconnectors and fuse-combination units | |
597 |
GOST R 50030.3-2012 | Low-voltage switchgear and controlgear. Part 3. Switches, disconnectors, switch-disconnectors and fuse-combination units | ||
598 | ST RK IEC 60947-3-2011 | Complete low-voltage switching equipment and control mechanisms. Part 3. Switches, disconnectors, switch-disconnectors and fuse units | ||
599 |
paragraphs | GOST IEC 60947-4-1-2015 | Complete low-voltage switching equipment and control mechanisms. Part 4-1. Contactors and motor starters. Electromechanical contactors and motor starters | |
600 |
GOST R 50030.4.1-2012 | Low-voltage switchgear and controlgear. Part 4. Contactors and starters. Section 1. Electromechanical contactors and starters | applies until 01.06.2017 | |
601 | ST RK IEC 60947-4-1-2011 | Low-voltage switchgear and controlgear. Part 4-1. Contactors and starters. Electromechanical contactors and motor starters | applies until 01.06.2017 | |
602 |
paragraphs |
GOST R 50030.4.2-2012 | Low-voltage switchgear and controlgear. Part 4. Contactors and starters. Section 2. Semiconductor controllers and starters for AC circuits | |
603 |
paragraphs | GOST IEC 60947-5-1-2014 | Low-voltage switchgear and controlgear. Part 5-1. Control circuit devices and switching elements. Electromechanical control circuit devices | |
604 | STB IEC 60947-5-1-2012 | Low-voltage switchgear and controlgear. Part 5-1. Devices in secondary switching circuits and switching elements. Electromechanical devices in secondary switching circuits | applies until 01.06.2017 | |
605 |
paragraphs | GOST IEC 60947-5-2-2012 | Low-voltage switchgear and controlgear. Part 5-2. Control circuit devices and switching elements. Proximity sensors | |
606 |
GOST R 50030.5.2-99 | Low-voltage switchgear and controlgear. Part 5-2. Control circuit devices and switching elements. Proximity sensors | applies until 01.06.2017 | |
606 |
paragraphs | GOST IEC 60947-5-3-2014 | Low-voltage switchgear and controlgear. Part 5-3. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions | |
608 |
paragraphs | GOST IEC 60947-5-4-2014 | Low-voltage switchgear and controlgear. Part 5-4. Control circuit devices and switching elements. Methods of assessing the performance of low-energy contacts. Special tests | |
609 |
GOST R 50030.5.4-2011 | Low-voltage switchgear and controlgear. Part 5.4. Control circuit devices and switching elements. Method of assessing the performance of low-current contacts. Special tests | applies until 01.06.2017 | |
610 |
paragraphs |
GOST 30011.5.5-2012 | Low-voltage switchgear and controlgear. Part 5-5. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function | |
611 |
paragraphs |
GOST 30011.6.1-2012 | Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 1. Automatic transfer switching equipment | |
612 | STB IEC 60947-6-1-2012 | Low-voltage switchgear and controlgear. Part 6-1. Multiple function equipment. Transfer switching equipment | ||
613 |
GOST R 50030.6.1-2010 | Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 1. Transfer switching equipment | ||
614 |
paragraphs | GOST IEC 60947-6-2-2013 | Low-voltage switchgear and controlgear. Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) | |
615 | of Article 4, Article 5 | GOST R | Low-voltage switchgear and controlgear. Part 6. | applies |
50030.6.2-2011 | Multiple function equipment. Section 2. Control and protective switching devices (or equipment) (CPS) | until 01.06.2017 | ||
616 | paragraphs | GOST | Low-voltage switchgear and controlgear. Part 7. | |
first – fourth, | 30011.7.1-2012 | Ancillary equipment. Section 1. Terminal | ||
sixth – tenth | (IEC 60947-7-1:2002) | blocks for copper conductors | ||
617 | paragraphs | GOST | Low-voltage switchgear and controlgear. Part 7. | |
first – fourth, | 30011.7.2-2012 | Ancillary equipment. Section 2. Terminal | ||
sixth – tenth | (IEC | blocks for protective conductors for connection of copper | ||
and twelfth of Article 4, Article 5 | 60947-7-2:2002) | conductors | ||
618 | paragraphs | GOST R | Low-voltage switchgear and controlgear. | |
first – fourth, | 50030.7.3-2009 | Part 7.3. Ancillary equipment. Requirements | ||
sixth – tenth | (IEC 60947-7-3:2002) | concerning safety for terminal blocks for fuses | ||
619 | paragraphs | GOST IEC | Switchgear and controlgear | |
first – fourth, sixth – tenth | 60947-7-4-2015 | low-voltage, complete. Part 7-4. Ancillary equipment. PCB terminal blocks for copper conductors | ||
620 |
paragraphs | GOST IEC 60947-8-2015 | Low-voltage switchgear and controlgear. Part 8. Control units for built-in thermal protection (PTC) for rotating electrical machines | |
621 |
paragraphs | GOST IEC 60950-1-2014 | Information technology equipment. Safety requirements. Part 1. General requirements | |
622 | GOST IEC 60950-1-2011 | Information technology equipment. Safety requirements. Part 1. General requirements | applies until 01.06.2017 | |
623 | STB IEC 60950-1-2003 | Information technology equipment. Safety. Part 1. General requirements | applies until 01.06.2017 | |
624 |
paragraphs | GOST IEC 60950-21-2013 | Information technology equipment. Safety requirements. Part 21. Remote power feeding | |
625 |
paragraphs | GOST IEC 60950-22-2013 | Information technology equipment. Safety requirements. Part 22. Equipment to be installed outdoors | |
626 |
paragraphs | GOST R IEC 60950-23-2011 | Information technology equipment. Safety requirements. Part 23. Large data storage equipment | |
627 | paragraphs first – fourth and | GOST 31999-2012 (IEC 60968:1988) | Self-ballasted lamps for general lighting services. Safety requirements |
628 | sixth – twelfth of Article 4, Article 5 | STB IEC 60968-2008 | Lamps with built-in ballasts for general lighting. Safety requirements | applies until 01.06.2017 |
629 |
paragraphs | GOST R IEC 60974-1-2012 | Arc welding equipment. Part 1. Welding power sources | |
630 |
paragraphs | GOST IEC 60974-2-2014 | Arc welding equipment. Part 2. Liquid cooling systems | |
631 |
paragraphs | GOST IEC 60974-3-2014 | Arc welding equipment. Part 3. Arc striking and stabilizing devices | |
632 |
paragraphs | GOST IEC 60974-5-2014 | Arc welding equipment. Part 5. Wire feeder | |
633 |
paragraphs | GOST IEC 60974-7-2015 | Arc welding equipment. Part 7. Torches | |
634 | ST RK IEC 60974-7-2011 | Arc welding equipment. Part 7. Torches | applies until 01.06.2017 | |
635 |
paragraphs | GOST IEC 60974-8-2014 | Arc welding equipment. Part 8. Gas consoles for welding and plasma cutting systems | |
636 |
paragraphs | GOST IEC 60974-11-2014 | Arc welding equipment. Part 11. Electrode holders | |
637 |
paragraphs | GOST IEC 60974-12-2014 | Arc welding equipment. Part 12. Coupling devices for welding cables | |
638 |
paragraphs |
GOST 31195.1-2012 | Connecting devices for low-voltage circuits for household and similar purposes. Part 1. General requirements | |
639 |
paragraphs | GOST IEC 60998-2-1-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-1. Additional requirements for connecting devices with screw-type clamping units used as separate entities | |
640 |
paragraphs | GOST IEC 60998-2-2-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-2. Additional requirements for connecting devices with screwless-type clamping units used as separate entities | |
641 |
paragraphs |
GOST 31195.2.3-2012 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-3. Additional requirements for clamping units that pierce the insulation of copper conductors to connect them | |
642 |
paragraphs | GOST IEC 60998-2-4-2013 | Connecting devices for low-voltage circuits for household and similar purposes. Part 2-4. Additional requirements for twist-on connecting devices | |
643 |
paragraphs |
GOST 31602.1-2012 | Connecting devices. Safety requirements for clamping units. Part 1. Requirements for screw-type and screwless-type clamping units for connecting copper conductors with a rated cross-section from 0,2 to 35 mm2 | |
644 |
paragraphs |
GOST 31602.2-2012 | Connecting devices. Safety requirements for clamping units. Part 2. Additional requirements for screw-type and screwless-type clamping units for connecting copper conductors with a rated cross-section from 35 to 300 mm2 | |
645 |
paragraphs | GOST IEC 61008-1-2012 | Residual current operated circuit-breakers for household and similar uses without integral overcurrent protection. Part 1. General requirements and test methods | |
646 |
GOST R | Residual current operated circuit-breakers for household and similar uses without integral overcurrent protection. Part 1. General requirements and test methods | applies until 01.06.2017 | |
647 |
paragraphs |
GOST 31601.2.1-2012 | Residual current operated circuit-breakers for household and similar uses without integral overcurrent protection. Part 2-1. Applicability of the general rules to RCCBs functionally independent of line voltage | |
648 |
paragraphs | GOST IEC 61009-1-2014 | Residual current operated circuit-breakers with integral overload current protection for household and similar uses. Part 1. General rules | |
649 |
GOST R 51327.1-2010 | Residual current operated circuit-breakers for household and similar uses with integral overcurrent protection. Part 1. General requirements and test methods | applies until 01.06.2017 | |
650 |
paragraphs |
GOST 31225.2.1-2012 | Residual current operated circuit-breakers for household and similar uses with integral overcurrent protection. Part 2-1. Applicability of the general rules to RCBOs functionally independent of line voltage | |
651 |
paragraphs | GOST IEC 61010-1-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 1. General requirements | |
652 |
GOST 12.2.091-2012 | Safety of electrical equipment for measurement, control and laboratory use. Part 1. General requirements | applies until 01.06.2017 | |
653 | GOST 12.2.091-2002 | Safety of electrical control and measuring instruments and laboratory equipment. Part 1. General requirements | applies until 01.06.2017 | |
654 |
paragraphs | GOST IEC 61010-2-010-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-010. Particular requirements for laboratory equipment for the heating of materials | |
655 |
paragraphs | GOST IEC 61010-2-020-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-020. Particular requirements for laboratory centrifuges. | |
656 |
paragraphs | GOST IEC 61010-2-030-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-030. Particular requirements for testing and measuring circuits | |
657 |
paragraphs | GOST IEC 61010-2-032-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-032. Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
658 | GOST IEC 61010-2-032-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-032. Particular requirements for hand-held current clamps for electrical measurement and test | applies until 01.06.2017 | |
659 |
paragraphs | GOST IEC 61010-2-033-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-033. Particular requirements for portable multimeters and other measuring instruments for domestic and professional use, capable of measuring mains voltage | |
660 |
paragraphs | GOST IEC 61010-2-051-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-051. Particular requirements for laboratory equipment for mixing and shaking | |
661 | GOST IEC 61010-2-051-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-051. Particular requirements for laboratory equipment for mixing and shaking | applies until 01.06.2017 | |
662 |
paragraphs | GOST IEC 61010-2-061-2014 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
663 | GOST IEC 61010-2-061-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | applies until 01.06.2017 | |
664 |
paragraphs | GOST IEC 61010-2-081-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
665 |
paragraphs | GOST IEC 61010-031-2013 | Safety of electrical control and measuring instruments and laboratory equipment. Part 031. Safety requirements for portable measuring probes for electrical measurement and test | |
666 | GOST IEC 61010-031-2011 | Safety of electrical control and measuring instruments and laboratory equipment. Part 031. Particular requirements for hand-held electrical probes for electrical measurement and test | applies until 01.06.2017 | |
667 |
paragraphs | GOST IEC 61029-1-2012 | Portable electric machinery. General safety requirements and test methods | |
668 |
paragraphs | GOST IEC 61029-2-1-2011 | Portable electric machinery. Particular safety requirements and test methods for circular saws | |
669 |
paragraphs | GOST IEC 61029-2-2-2011 | Portable electric machinery. Particular safety requirements and test methods for radial arm saws | |
670 |
paragraphs | GOST IEC 61029-2-3-2011 | Portable electric machinery. Particular safety requirements and test methods for planers and thicknessers | |
671 |
paragraphs | GOST IEC 61029-2-4-2012 | Portable electric machinery. Particular safety requirements and test methods for bench grinders | |
672 | GOST R IEC 1029-2-4-96 | Portable electric machinery. Particular safety requirements and test methods for bench grinders | applies until 01.06.2017 | |
673 |
paragraphs | GOST IEC 61029-2-5-2011 | Portable electric machinery. Particular safety requirements and test methods for band saws | |
674 |
paragraphs | GOST IEC 61029-2-6-2011 | Portable electric machinery. Particular safety requirements and test methods for diamond drilling machines with water supply | |
675 |
paragraphs | GOST IEC 61029-2-7-2011 | Portable electric machinery. Particular safety requirements and test methods for diamond saws with water supply | |
676 |
paragraphs | GOST IEC 61029-2-8-2011 | Portable electric machinery. Particular safety requirements and test methods for single-spindle vertical moulding machines | |
677 |
paragraphs | GOST IEC 61029-2-9-2012 | Portable electric machinery. Particular safety requirements and test methods for mitre saws | |
678 | GOST R IEC 1029-2-9-99 | Portable electric machinery. Particular safety requirements and test methods for mitre saws | applies until 01.06.2017 | |
679 |
paragraphs | GOST IEC 61029-2-10-2013 | Portable electric machinery. Particular safety requirements and test methods for cut-off grinders | |
680 |
paragraphs | GOST IEC 61029-2-12-2014 | Portable electric machinery. Part 2-12. Particular safety requirements and test methods for external thread cutting machines | |
681 |
paragraph | GOST IEC 61034-1-2011 | Measurement of smoke density of cables burning under defined conditions. Part 1. Test equipment | |
682 |
paragraph | GOST IEC 61034-2-2011 | Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements | |
683 |
paragraphs | GOST IEC 61048-2011 | Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements | |
684 |
paragraphs | GOST IEC 61050-2011 | Transformers for tubular discharge lamps having a no-load voltage exceeding 1000 V (former name – "Neon transformers"). General and safety requirements | |
685 |
paragraphs | GOST IEC 61058-1-2012 | Switches for appliances. Part 1. General requirements | |
686 | STB IEC 61058-1-2009 | Switches for appliances. Part 1. General requirements | applies until 01.06.2017 | |
687 | GOST R IEC 61058.1-2000 | Switches for appliances. Part 1. General requirements and test methods | applies until 01.06.2017 | |
688 |
paragraphs | GOST IEC 61058-2-1-2013 | Switches for household electrical appliances. Part 2-1. Additional requirements for cord switches | |
689 |
paragraphs | GOST IEC 61058-2-4-2012 | Switches for household electrical appliances. Part 2-4. Additional requirements for independently mounted switches | |
690 |
paragraphs | GOST IEC 61058-2-5-2012 | Switches for appliances. Part 2-5. Additional requirements for pole selector switches | |
691 |
paragraphs | GOST IEC 61071-2014 | Power electronic capacitors | |
692 |
paragraphs | GOST 31637-2012 | Electromechanical contactors for household and similar use | |
693 |
GOST R | Electromechanical contactors for household and similar purposes | ||
694 |
paragraphs | GOST IEC 61131-2-2012 | Programmable controllers. Part 2. Equipment requirements and tests | |
695 | STB IEC 61131-2-2010 | Programmable controllers. Part 2. Equipment requirements and tests | applies until 01.06.2017 | |
696 | paragraph twelfth of Article 4, Article 5 |
GOST R | Metal halide lamps. Performance requirements | |
697 |
paragraphs | GOST IEC 61184-2011 | Bayonet lampholders | |
698 |
paragraphs | GOST R 51288-99 (IEC 187-93) | Measuring Instruments for electrical and magnetic quantities. Operational documents | |
699 |
paragraphs | GOST IEC 61195-2012 | Double-capped fluorescent lamps. Safety requirements | |
700 | STB IEC 61195-2001 | Double-capped fluorescent lamps. Safety requirements | applies until 01.06.2017 | |
701 |
paragraphs | GOST IEC 61199-2011 | Single-capped fluorescent lamps. Safety requirements | |
702 | STB IEC 61199-2006 | Single-capped fluorescent lamps. Safety requirements | applies until 01.06.2017 | |
703 |
paragraphs | GOST IEC 61204-2013 | Low-voltage DC power supplies. Performance characteristics | |
704 |
paragraphs | GOST IEC 61204-7-2014 | Low-voltage DC power supplies. Part 7. Safety requirements |
705 |
paragraphs | GOST IEC 61210-2011 | Connecting devices. Flat quick-connect terminations for copper electrical conductors. Safety requirements | |
706 |
paragraphs | GOST IEC 61230-2012 | Live working. Portable equipment for earthing or earthing and short-circuiting | |
707 | STB IEC 61230-2008 | Live working. Portable equipment for earthing or earthing and short-circuiting | applies until 01.06.2017 | |
708 |
paragraphs | GOST 31223-2012 (IEC 61242:1995) | Extension cords on cable reels for household and similar purposes. General requirements and test methods | |
709 |
paragraphs | GOST IEC 61243-3-2014 | Live working. Voltage detectors. Part 3. Two-pole low-voltage type | |
710 |
paragraphs | GOST IEC 61270-1-2013 | Capacitors for microwave ovens. Part 1. General | |
711 |
paragraphs | GOST R IEC 61347-1-2011 | Lamp control devices. Part 1. General and safety requirements | |
712 | STB IEC 61347-1-2008 | Ballasts for lamps. Part 1. General and safety requirements | ||
713 |
ST RK IEC | Lamp control equipment. Part 1. General and safety requirements | ||
714 |
paragraphs | GOST IEC 61347-2-2-2014 | Ballasts for lamps. Part 2-2. Additional requirements for DC or AC supplied electronic step-down converters for filament lamps | |
715 |
paragraphs | GOST R IEC 61347-2-3-2011 | Control devices for lamps. Part 2-3. Particular requirements for AC supplied electronic ballasts for tubular fluorescent lamps | |
716 |
paragraphs | GOST IEC 61347-2-7-2014 | Lamp control devices. Part 2-7. Particular requirements for battery-supplied electronic ballasts used for emergency lighting (self-contained). | |
717 |
paragraphs | GOST R IEC 61347-2-8-2011 | Lamp control devices. Part 2-8. Particular requirements for ballasts for fluorescent lamps | |
718 |
paragraphs | GOST IEC 61347-2-9-2014 | Lamp control devices. Part 2-9. Particular requirements for electromagnetic ballasts for discharge lamps (excluding fluorescent lamps) | |
719 |
paragraphs | GOST IEC 61347-2-10-2014 | Ballasts for lamps. Part 2-10. Additional requirements for electronic inverters and converters for high-frequency cold-start tubular gas-discharge lamps (neon lamps) | |
720 |
paragraphs | GOST IEC 61347-2-11-2014 | Ballasts for lamps. Part 2-11. Additional requirements for auxiliary electronic circuits for luminaires | |
721 |
paragraphs | GOST IEC 61347-2-12-2015 | Ballasts for lamps. Part 2-12. Additional requirements for DC or AC supplied electronic ballasts for gas-discharge lamps (excluding fluorescent lamps) | |
722 |
paragraphs | GOST IEC 61347-2-13-2013 | Ballasts for lamps. Part 2-13. Additional requirements for DC or AC supplied electronic ballasts for light-emitting diode modules | |
723 | GOST R IEC 61347-2-13-2011 | Lamp control devices. Part 2-13. Particular requirements for DC or AC supplied electronic control devices for LED modules | applies until 01.06.2017 | |
724 |
paragraphs | GOST IEC 61439-1-2013 | Low-voltage switchgear and controlgear assemblies. Part 1. General requirements | |
725 |
paragraphs | GOST IEC 61439-2-2015 | Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies | |
726 |
paragraphs | GOST IEC 61439-5-2013 | Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for power distribution in public networks | |
727 |
paragraphs | GOST IEC 61535-2015 | Installation couplers intended for permanent connection in fixed installations | |
728 |
paragraphs first, |
GOST R | Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods | |
729 |
paragraphs first, |
GOST R 54127-1-2010 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements | |
730 |
paragraphs | GOST IEC 61557-2-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance | |
731 |
GOST R 54127-2-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance | applies until 01.06.2017 | |
732 |
paragraphs one, | GOST IEC 61557-3-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance | |
733 |
GOST R 54127-3-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance | applies until 01.06.2017 | |
734 |
paragraphs one, | GOST IEC 61557-4-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earthing and equipotential bonding | |
735 |
GOST R 54127-4-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earthing and equipotential bonding | applies until 01.06.2017 | |
736 |
paragraphs one, | GOST IEC 61557-5-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance of earth electrode to earth | |
737 |
GOST R 54127-5-2011 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance of earth electrode to earth | applies until 01.06.2017 | |
738 |
paragraphs one, | GOST IEC 61557-6-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT and TN systems | |
739 |
GOST R 54127-6-2012 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT, TN and IT systems | applies until 01.06.2017 | |
740 |
paragraphs one, | GOST IEC 61557-7-2013 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence | |
741 |
GOST R | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence | applies until 01.06.2017 | |
742 |
paragraphs one, | GOST IEC 61557-8-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 8. Insulation monitoring devices for IT systems | |
743 |
paragraphs one, | GOST IEC 61557-9-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 9. Equipment for insulation fault location in IT systems | |
744 |
paragraphs one, | GOST IEC 61557-10-2015 | Electrical safety in low-voltage distribution systems up to 1000 V AC 1500 V DC. Equipment for testing, measuring or monitoring of protective devices. Part 10. Combined measuring equipment for testing, measuring or monitoring of protective devices | |
745 |
paragraphs one, | GOST IEC 61557-11-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 11. Effectiveness of residual current monitors (RCMs) of type A and type B in TT, TN and IT systems | |
746 |
paragraphs one, | GOST IEC 61557-12-2015 | Low-voltage electrical distribution networks with voltages up to 1000 V AC and 1500 V DC. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 12. Performance measuring and monitoring devices (PMD) | |
747 |
paragraphs one, | GOST IEC 61557-13-2014 | Low-voltage electrical distribution networks up to 1000 V AC and 1500 V DC. Safety. Equipment for testing, measuring or monitoring of protective measures. Part 13. Hand-held and hand-manipulated current clamps and sensors for measuring leakage current in electrical distribution systems | |
748 |
paragraphs | GOST IEC 61558-1-2012 | Safety of power transformers, power supplies, electrical reactors and similar products. Part 1. General requirements and test methods | |
749 |
paragraphs | GOST IEC 61558-2-1-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-1. Additional requirements and test methods for separating transformers and power supplies incorporating separating transformers for general use | |
750 |
paragraphs | GOST IEC 61558-2-2-2015 | Safety of power transformers, power supply units, reactors and similar equipment. Part 2-2. Particular requirements and tests for control transformers and power supply units incorporating control transformers | |
751 |
paragraphs | GOST IEC 61558-2-3-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-3. Particular requirements and test methods for ignition transformers for gas and liquid-fuel burners | |
752 |
paragraphs | GOST IEC 61558-2-4-2015 | Safety of transformers, reactors, power supply units and similar equipment for supply voltages up to 1100 V. Part 2-4. Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers | |
753 |
paragraphs | GOST IEC 61558-2-5-2013 | Safety of power transformers, power supply units and similar equipment. Part 2-5. Particular requirements for shaver transformers and shaver power supply units | |
754 |
paragraphs | GOST IEC 61558-2-6-2012 | Safety of transformers, electrical reactors, power supplies and similar products for supply voltages up to 1100 V. Part 2-6. Particular requirements and test methods for safety isolating transformers and power supplies incorporating safety isolating transformers | |
755 |
paragraphs | GOST IEC 61558-2-7-2012 | Power transformers, power supply units, reactors and similar products. Safety. Part 2-7. Particular requirements for transformers and power supply for toys | |
756 |
paragraphs | GOST IEC 61558-2-8-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-8. Particular requirements and test methods for transformers and power supply units for bells and audible signalling devices | |
757 |
paragraphs | GOST IEC 61558-2-9-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-9. Particular requirements and test methods for transformers and power supply units for class III portable luminaires with tungsten filament lamps | |
758 |
paragraphs | GOST IEC 61558-2-10-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-10. Particular requirements and test methods for separating transformers with high insulation level and separating transformers with output voltages exceeding 1000 V | |
759 |
paragraphs | GOST IEC 61558-2-12-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-12. Particular requirements and test methods for transformers with stabilized secondary voltage and stabilized power supply units | |
760 |
paragraphs | GOST IEC 61558-2-13-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-13. Particular requirements and test methods for auto-transformers and power supply units incorporating auto-transformers | |
761 |
paragraphs | GOST IEC 61558-2-14-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-14. Particular requirements and test methods for variable transformers and power supply units incorporating variable transformers | |
762 |
paragraphs | GOST IEC 61558-2-15-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-15. Particular requirements and test methods for isolating transformers for the supply of medical locations | |
763 |
paragraphs | GOST IEC 61558-2-16-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-16. Particular requirements and test methods for switch mode power supply units and transformers for switch mode power supply units | |
764 |
paragraphs | GOST IEC 61558-2-20-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-20. Particular requirements and test methods for low-power reactors | |
765 |
paragraphs | GOST IEC 61558-2-23-2015 | Safety of power transformers, power supplies, reactors and similar products. Part 2-23. Particular requirements and test methods for transformers and power supply units for construction sites |
766 |
paragraphs | GOST IEC 61643-11-2013 | Low-voltage surge protective devices. Part 11. Surge protective devices in low-voltage power systems | |
767 |
paragraphs | GOST IEC 61643-21-2014 | Low-voltage surge protective devices. Part 21. Surge protective devices connected to telecommunications and signalling networks. Performance requirements and test methods | |
768 |
paragraphs | GOST IEC 61770-2012 | Electrical appliances connected to water supply networks. Prevention of backsiphonage and damage to connecting hoses | |
769 | STB IEC 61770-2007 | Electrical appliances connected to water supply networks. Prevention of backsiphonage and damage to connecting hoses | applies until 01.06.2017 | |
770 |
paragraphs | GOST R IEC 61730-1-2013 | Photovoltaic modules. Safety Assessment. Part 1. Requirements for construction | |
771 |
paragraphs | GOST IEC 61810-1-2013 | Electromechanical logic relays with non-specified operating time. Part 1. General requirements | |
772 |
paragraphs | GOST IEC 61812-1-2013 | Specified-time relays for industrial use. Part 1. Requirements and tests | |
773 |
paragraphs | STB IEC 61851-1-2008 | Conductive charging system for electric vehicles. Part 1. General requirements | |
774 | GOST R IEC 61851-1-2013 | Conductive charging system for electric vehicles. Part 1. General requirements | ||
775 |
paragraphs | STB IEC 61851-21-2007 | Electric vehicle conductive charging system. Part 21. Electric vehicle requirements for connection to an AC or DC power supply | |
776 |
paragraphs | GOST IEC 61869-1-2015 | Instrument transformers. Part 1. General requirements | |
777 |
paragraphs | GOST R IEC 61869-2-2015 | Instrument transformers. Part 2. Additional requirements for current transformers | |
778 | ST RK IEC 61869-2-2013 | Instrument transformers. Part 2. Additional requirements for current transformers | ||
779 |
paragraphs | GOST IEC 61869-3-2012 | Instrument transformers. Part 3. Additional requirements for inductive voltage transformers | |
780 |
paragraphs | GOST IEC 61995-1-2013 | Devices for the connection of luminaires for household and similar purposes. Part 1. General requirements | |
781 |
paragraphs | GOST IEC 62031-2011 | Light-emitting diode modules for general lighting. Safety requirements | |
782 | STB IEC 62031-2009 | Modules with light-emitting diodes for general lighting. Safety requirements | applies until 01.06.2017 | |
783 |
paragraphs | GOST 31948-2012 (IEC 62035:1999) | Discharge lamps (excluding fluorescent lamps). Safety requirements | |
784 | STB IEC 62035-2007 | Gas-discharge lamps (excluding fluorescent lamps). Safety requirements | ||
785 |
paragraphs | GOST IEC 62040-1-2013 | Uninterruptible power systems (UPS). Part 1. General requirements and safety requirements for uninterruptible power installations (UPS) | |
786 | ST RK IEC 62040-1-2011 | Uninterruptible power supplies (UPS). Part 1. General requirements and safety requirements for UPS | applies until 01.06.2017 | |
787 |
paragraphs | GOST IEC 62208-2013 | Enclosures for low-voltage switchgear and controlgear assemblies. General requirements | |
788 | GOST 32127-2013 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements | applies until 01.06.2017 | |
789 |
paragraphs five | GOST EN 62233-2013 | Methods for measuring electromagnetic fields generated by household and similar electrical appliances with regard to human exposure | |
790 | STB EN 50366-2007 | Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement | applies until 01.06.2017 | |
791 |
paragraphs five | GOST IEC 62311-2013 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz) | |
792 |
paragraphs | GOST IEC 62368-1-2014 | Audio/video, information technology and communication technology equipment. Part 1. Safety requirements | |
793 |
paragraphs five | GOST IEC 62423-2013 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses | |
794 |
paragraphs five | GOST IEC 62471-2013 | Photobiological safety of lamps and lamp systems | |
795 |
paragraphs five | GOST IEC 62479-2013 | Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz – 300 GHz) | |
796 |
paragraphs five | GOST IEC 62493-2014 | Assessment of lighting equipment related to human exposure to electromagnetic fields | |
797 |
paragraphs | GOST IEC 62552-2013 | Household refrigerating appliances. Technical requirements and test methods | |
798 |
paragraphs | STB IEC 62560-2011 | Lamps with light-emitting diodes with built-in ballasts for general lighting with a supply voltage above 50 V. Safety requirements | |
799 | GOST R IEC 62560-2011 | LED lamps with built-in control gear for general lighting at voltages above 50 V. Safety requirements | ||
800 | Article 4 | ST RK IEC 62821-1-2015 | Electric cables. Cables with halogen-free, low-smoke thermoplastic insulation and sheath, for rated voltages up to and including 450/750 V. Part 1. General requirements | |
801 | Article 4 | ST RK IEC 62821-2-2015 | Electric cables. Cables with halogen-free, low-smoke thermoplastic insulation and sheath, for rated voltages up to and including 450/750 V. Part 2. Test methods | |
802 | Article 4 | ST RK IEC 62821-3-2015 | Electric cables. Cables with halogen-free, low-smoke thermoplastic insulation and sheath, for rated voltages up to and including 450/750 V. Part 3. Flexible cables (cords) | |
803 | Articles 4 and 5 | GOST IEC 62841-1-2014 | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 1. General requirements | |
804 | Articles 4 and 5 | GOST IEC 62841-2-2-2015 | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 2-2. Particular requirements for screwdrivers and impact wrenches | |
805 | Articles 4 and 5 | GOST IEC 62841-2-4-2015 | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 2-4. Particular requirements for surface sanders and belt sanders | |
806 | Articles 4 and 5 | GOST IEC 62841-2-5-2015 | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 2-5. Particular requirements for circular saws | |
807 | Articles 4 and 5 | GOST IEC 62841-3-1-2015 | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 3-1. Particular requirements for transportable table saws | |
808 | Articles 4 and 5 |
GOST IEC | Electric hand-held, transportable and garden machinery. Safety and test methods. Part 3-6. Particular requirements for diamond drilling machines with a liquid system | |
809 | Articles 4 and 5 |
sections 7 and 8 | Symmetrical communication cables for digital transmission systems. General specifications |
