What is an EAC certificate?
The EAC certificate of the Eurasian Economic Union confirms conformity with the Technical Regulations (TR ZU/EAWU) of the EAEU states. The EAC certification system replaced the GOST certification system in 2015.
Products whose EAC conformity has been confirmed through EAC certification or EAC declaration in accordance with the provisions of the Technical Regulations of the EAEU states may be sold and consumed in all EAEU member states.
What is an EAC declaration?
The EAC declaration of the Eurasian Economic Union is official proof that the approved products meet the minimum requirements of the Technical Regulations of the EAEU member states. Declarations are prepared and registered by the manufacturer itself, the importer or the manufacturer's authorised representative.
Goods whose EAC conformity with the TR ZU/EAWU regulations has been confirmed may be sold throughout the territory of the Eurasian Economic Union.
What does EAC approval mean?
EAC approval is a conformity document that enables exports to the countries of the Eurasian Economic Union. EAC stands for Eur‑Asian‑Conformity / Eurasian Conformity. The EAC mark is similar in meaning to the European CE marking.
Which documents are required?
The required documents and operating documentation depend on the applicable Technical Regulation (TR ZU/EAWU). Each regulation specifies exactly which documents and operating documentation must be submitted as part of the EAC conformity assessment for the approval of goods in the EAEU member states.
Examples of common Technical Regulations:
- TR ZU 004/2011 - Safety of low‑voltage installations: Passport and operating instructions
- TR ZU 020/2011 - Electromagnetic compatibility: Technical passport and operating instructions
- TR ZU 010/2011 - Machinery safety: Technical passport, operating instructions and risk analysis
Language requirements: All documents must be submitted in Russian or in an official language of an EAEU member state (e.g. Armenian, Kazakh, Kyrgyz, Belarusian). It is advisable to have the documents prepared and reviewed by experienced specialists to avoid delays in the certification process.
How much does an EAC certificate cost?
Prices vary considerably; to determine the cost of an EAC certificate , a product description and customs tariff code are required. Prices can range from 2,500 euros to 25,000 euros. The costs depend on the following factors: scope of application, product characteristics, number and location of production sites.
What makes up the EAC costs?
The costs of EAC certification or an EAC declaration cannot be stated as a flat rate, as they depend on various factors.
The main influencing factors include:
- Type of product and its hazard potential
- Applicable Technical Regulations (TR ZU/TR EAWU)
- Form of conformity assessment: Certificate or declaration
- Regulatory requirements: Testing obligations, audit requirements, etc.
- Type of supply: Series production, batch delivery or single delivery
- Certification scheme or declaration scheme
- Level of involvement of accredited testing laboratories
An accurate quotation requires an individual review of your product specifications by an experienced certification body.
Can an error in the certificate be corrected?
As a rule, subsequent amendments to an EAC Declaration or EAC Certificate that has already been issued are not permitted. If corrections are required, the conformity document concerned must be replaced by a newly issued document.
For declarations, however, a simplified correction procedure is available under certain conditions. The applicant can apply for a new declaration based on the existing test and supporting documents without having to repeat the entire conformity assessment procedure. In this case, the original erroneous declaration is formally annulled and replaced by the corrected version.
How long are EAC approvals valid?
The validity period depends on the type of approval and the applicable TR ZU regulation:
Serial production: The EAC Certificate or EAC Declaration is generally valid for up to 3 or 5 years, depending on the requirements of the applicable regulation.
Single delivery or batch delivery: The EAC approval is issued on a one‑off basis for the specific delivery and ceases to be valid once the delivery is completed.
An EAC conformity attestation can also be requested for just one year, for example for pilot projects, temporary imports or test markets. The Technical Regulations (TR ZU/EAWU) contain binding requirements regarding validity periods for the respective product groups.
Can an EAC approval be extended?
Once the validity period expires, a new EAC Certificate or EAC Declaration is generally required. However, certain Technical Regulations provide for an extension under defined conditions. This option applies exclusively to certificates; there is no provision for extending declarations.
How long does EAC approval take?
The duration of the conformity assessment depends on the selected procedure and scheme:
EAC declaration procedure: Depending on the scheme, an EAC Declaration can be issued within 1 to 2 weeks. The effort involved is generally manageable.
EAC certification: Certification involves more effort and takes considerably more time. For more complex goods, certification can take between 2 and 4 weeks.
Representation in the EAWU states?
Through a branch in the EAWU, AC Inorms GmbH offers authorized representation for foreign manufacturers in the EAWU states . This means that the manufacturer does not depend on individual local customers and can allow EAC certification flexibly. Sales activities are organized through powers of attorney granted to the desired customers.
Only a company established within the territory of the Eurasian Economic Union (EAWU) is entitled to carry out EAC certification or the EAC declaration procedure.
Evidence of the appointment of the authorized representative in the EAWU states is required for the EAWU authorities. Cooperation is confirmed by a contract between the manufacturer and the authorized representative. The representation agreement is one of the documents required as part of the conformity assessment procedure.
What does the EAC marking mean?
The EAC mark serves as evidence that a product has been certified or declared in accordance with the provisions of the TR ZU/EAWU regulations of the Eurasian Economic Union (EAWU). The EAC marking confirms that the requirements concerning the protection of health, life and the environment, as well as consumer protection, have been met.
Products that have successfully completed the mandatory conformity assessment may bear the EAC mark. Only then may these products be imported into and sold in the EAWU member states. The EAC marking is therefore a mandatory prerequisite for access to the EAWU market.
All requirements for product marking, including information on product characteristics, special symbols and other relevant information, are defined in the respective TR ZU/EAWU regulations. EAC certification or the EAC declaration procedure is carried out on the basis of the Technical Regulations of the EAWU states.
What are the marking requirements?
The EAC mark must be affixed to products that have received an EAC Certificate.
- The EAC mark must be affixed to the goods visibly and legibly
- The EAC mark must remain on the goods throughout their entire service life
- The EAC mark must be affixed to the goods in a fade‑resistant form
- The EAC mark must be affixed to the goods in monochrome
- The EAC mark must appear on every production unit
- The EAC mark must be at least 5 millimetres high and wide
- The EAC mark must appear in all accompanying documentation
Is GOST certification still valid?
GOST certification remains valid for certain product groups. Examples include products not subject to mandatory EAC certification: high‑voltage installations or fire protection products. Thus, with some exceptions, GOST certification is gradually being replaced by the EAC certification system.
The GOST certificate is the former certificate of conformity in Russia, Kazakhstan or Belarus. The EAC certificate is a certificate of conformity for the entire territory of the Customs Union of the EAEU member states (EAEU: Russia, Kazakhstan, Belarus, Armenia and Kyrgyzstan).
GOST certification is required for all products listed in Regulation No. 982 of 01.12.2009. Regulation No. 982 covers more than 100 product groups subject to mandatory certification under the GOST guidelines.
What is the difference between an EAC certificate and an EAC declaration?
EAC certificates and EAC declarations are two forms of conformity assessment. The Technical Regulations (TR ZU/EAEU) set out the requirements for EAC approval (EAC certificates, EAC declarations or SGR registrations) for all product groups. The provisions of the Technical Regulations therefore specify which form of conformity attestation is prescribed for particular products.
EAC certification involves testing the quality and safety of products. Testing is carried out by an accredited certification body based in the EAEU member states. Certification is based on product information contained in the operating documentation and internal and external test reports, or on production audits and factory inspections.
The certificate is printed on an official template featuring several anti‑counterfeiting elements and is authenticated by the approval body with an expert's signature and a stamp. The declaration is printed on a DIN A4 sheet.
Certification is generally required for highly complex technical goods that require comprehensive oversight by the EAEU authorities. EAC declaration is generally required for simple products, such as food or clothing.
The declaration is a manufacturer's declaration of conformity confirming that the goods meet the minimum requirements of the Technical Regulations of the EAEU member states. The EAC declaration may be made by the importer or the manufacturer's authorised representative.
What is an exemption letter?
An EAC exemption letter is an official document issued by experts from an accredited certification body. It confirms that a particular product is subject to neither mandatory EAC declaration nor EAC certification under the Technical Regulations of the Eurasian Economic Union (TR ZU/EAEU).
Such a letter is particularly important when the classification of goods is complex and there is uncertainty as to whether certification is mandatory. Customs authorities may also require it when goods are imported into the customs territory of the EAEU member states.
What is a surveillance inspection?
For certain product categories, surveillance inspections are mandatory under the Technical Regulations of the Customs Union (TR ZU) or the Eurasian Economic Union (EAEU). These inspections ensure that product quality consistently meets the applicable safety and quality requirements throughout the validity period of the EAC certificate.
Scheduled surveillance inspections are standardised, regularly recurring measures to verify continued conformity with the relevant technical regulations. They are an integral part of the certification procedure for series production. Surveillance inspections do not apply to one‑off deliveries or EAC declaration procedures; they are provided for exclusively in connection with certificates for series‑produced products.
The purpose of surveillance inspections is to ensure that certified products continue to comply with the requirements defined in the relevant Technical Regulation. Non‑conformities may result in withdrawal of the certificate. These checks generally take place once a year. The first scheduled inspection may take place no earlier than 6 months after the certificate is issued, but no later than within 12 months.
Depending on the applicable Technical Regulation, the surveillance inspection may involve either an audit of the manufacturing processes or testing of product samples taken. In addition to scheduled inspections, unscheduled checks are also provided for in certain cases.
What is an EAC operating manual?
An operating manual for EAC certification is mandatory for successful product approval. In an EAC operating manual important instructions and information on the operation and maintenance of products are provided.
What is a safety justification?
An EAC safety justification is a document containing an analysis of potential risks and technical information on ensuring the safety of goods subject to mandatory certification.
The preparation of safety justifications is mandatory under Directive TR ZU 010/2011 on the safety of machinery and equipment and TR ZU 032/2013 on the safety of equipment operating under excessive pressure.
What is a Technical Passport?
The technical passport is a mandatory operating document that summarises the key information about a product. A technical passport for EAC certification contains legally required information. Preparing technical passports is mandatory for exporting products to the EAEU member states.
The passport is prepared by specialists in accordance with the standards GOST 2.601‑95, GOST 2.601‑2013 and GOST 2.610‑2006, as well as the requirements of the applicable Technical Regulation (TR ZU/TR EAWU). The technical passport forms part of the documentation that must be submitted for EAC certification or EAC declaration.
The preparation of a technical passport is required by GOST standards 2.601‑2013 and 2.610‑2006, and the passport forms part of the technical documentation for EAC conformity assessment.
The technical passport contains the following information:
- Technical characteristics of the product
- Instructions on packaging, operation, maintenance and repair
- Manufacturer's warranty terms
- Service life and storage period
- Storage and disposal
When is a production audit necessary?
EAC audits are generally necessary when it is not possible to test the goods in an accredited laboratory in the Eurasian Economic Union.
As part of the conformity assessment of products subject to certification, the TR ZU/EAWU regulations require a production audit in certain cases. This applies in particular to series production in which products of the same type are manufactured on an ongoing basis.
The production audit is conducted on site by an accredited certification body. Its purpose is to verify whether the production processes comply with the requirements of the applicable Technical Regulations, particularly with regard to quality, uniformity and safety.
In certain cases, the EAC production audit can be replaced by ISO certification of the quality management system for the EAEU member states.
In which countries are EAC approvals valid?
EAC certificates and EAC declarations are valid in all member states of the Eurasian Economic Union (Russia, Kazakhstan, Belarus, Armenia and Kyrgyzstan). Please note that minor differences in standardisation exist within the individual EAEU member states.
What is the Eurasian Economic Union?
The Eurasian Economic Union was established in 2010 as a customs union between Russia, Belarus (White Russia) and Kazakhstan. This abolished internal borders between the participating states and enabled the free movement of goods and services within the customs union.
In 2015, the customs union was transformed into the Eurasian Economic Union. The EAEU member states currently comprise Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
Information in certificates and declarations?
In accordance with Decision No. 293 of the EAEU Commission dated 25.12.2012, the following information must be included in the conformity documents:
1. Certification body: Name, address and accreditation information.
2. Applicant: Name, address, telephone number, responsible persons and contact details.
3. Product details: Product designation, customs tariff code, TR ZU/EAWU directive, type, series and model.
4. Basis: References to operating documents, test reports or ISO certificates.
5. Information: Expiry date, service life, storage conditions and packaging details.
7. Validity of the conformity document: Specification of the validity period of the EAC approval.
8. Confirmation: Signatures of the expert and stamp of the certification body.
9. Annexes: Product types, product descriptions, production sites and branches.
What is a TR ZU/EAWU Technical Regulation?
A Technical Regulation of the Eurasian Economic Union is a directive for carrying out EAC certification or EAC declaration. In the course of economic integration between the individual participating states of the Eurasian Economic Union (Russia, Belarus, Kazakhstan, Kyrgyzstan and Armenia), the national GOST directives were harmonised and replaced by the modern Technical Regulations of the EAEU member states.
The aim of modern Technical Regulations is to introduce a common conformity assessment system within the EAEU member states. The introduction of common Technical Regulations established minimum requirements for the quality and safety of goods in the EAEU states.
Conformity assessment in accordance with the TR ZU/EAWU directives is required for EAC certification, EAC declaration or SGR registration.
Currently (2025), there are 52 TR ZU directives. The Technical Regulations of the EAEU states contain mandatory provisions for the EAC approval of various product groups, such as: chemical products, clothing, furniture, mining, electrical engineering, mechanical engineering, ATEX equipment, pressure equipment, food, vehicles and automotive parts. Further information is available here: EAC certification of various product groups.
Which TR ZU apply to the goods?
For products to be successfully distributed within the territory of the Customs Union, manufacturers must study the relevant regulations thoroughly. The TR ZU/EAWU regulations specify precisely which goods fall under each regulation, which are exempt and how conformity is demonstrated.
Changes to the lists of goods requiring confirmation of conformity are regularly published by the EAEU Commission on the website of the Eurasian Economic Union. It is advisable to seek support from an experienced specialist company that can provide competent advice and guide you through the approval processes with in‑depth expertise.
What are conformity assessment schemes?
Various procedural schemes exist for conformity assessment. Each scheme defines the steps that the manufacturer or applicant must take to demonstrate the product's conformity with the applicable TR ZU/EAWU requirements.
Several factors influence the choice of the appropriate scheme: the specific characteristics of the product, the type of supply, the potential risk of hazards and the level of involvement of the certification body or a testing laboratory.
The appropriate approval scheme is selected either by the certification body or by the manufacturer / applicant, depending on whether EAC certification or EAC declaration is required.
Who may use a certificate or declaration?
As a general rule, a company cannot independently use an EAC certificate or an EAC declaration issued to another legal entity. However, use is possible if a formal power of attorney has been granted by the holder of the conformity documents, i.e. the manufacturer or its authorized representative. In addition, a copy of the relevant conformity document must be provided. Only this combination gives the company using the documents the right to rely on the existing conformity approvals.
What is the difference between the CE mark and the EAC mark?
The EAC mark confirms EAC certification. Almost all products exported to Russia and the EAEU states are subject to EAC certification in accordance with the Technical Regulations of the EAEU states.
Certified products are confirmed by the EAC marking. The CE mark demonstrates the EU conformity of the goods. CE marking of products is a prerequisite for placing goods on the market within the territory of the European Economic Union.
What is the difference between GOST, TR and EAC?
The abbreviation EAC stands for Eurasian Conformity / Eurasian Conformity. The EAC certification system is based on conformity assessment in accordance with the requirements of the TR ZU/EAWU directives and is required for exports to the Eurasian Economic Union.
The EAC marking is a legally required marking used to identify certified or declared products. The abbreviation TR ZU is used to designate the Technical Regulations of the Customs Union. The abbreviation TR EAWU is used to designate the Technical Regulations of the Eurasian Economic Union.
All three abbreviations therefore refer to the technical approval of products in accordance with the Technical Regulations of the Eurasian Economic Union. The terms EAC, TR ZU and TR EAWU are generally used synonymously. GOST certification was replaced by modern EAC certification following the entry into force of the Technical Regulations (TR ZU/EAWU) of the Eurasian Economic Union in 2010.
However, GOST certificates or declarations remain valid within the national conformity systems of the EAEU member states. In Russia, for example, GOST certification continues to apply to product groups not covered by the TR ZU/EAWU regulations.
GOST certification is mandatory for all products listed in Government Resolution No. 982 of 01.12.2009. Government Resolution No. 982 includes several product groups subject to mandatory GOST approval. TR certification is a Russian certification system, also known as GOST R or GOST TR. The aim of TR certification is to modernize outdated GOST directives from the Soviet Union era. The designation TR stands for Technical Regulations.
With the establishment of the Eurasian Economic Union in 2010, the national conformity assessment systems of the EAEU states were harmonized and many national directives were repealed. The national conformity assessment systems now apply only in areas where there is no common EAEU regulation. Consequently, GOST and TR certificates are recognized only within national borders, whereas EAC certificates and EAC declarations are valid in all states of the Eurasian Economic Union.
Who may carry out EAC certification?
EAC certification is carried out by an accredited testing body based in the EAEU. The approval body organizes production audits and product testing in accordance with the provisions of the Technical Regulations of the Eurasian Economic Union.
The EAC declaration procedure may be carried out by the manufacturer, importer or the manufacturer's authorized representative. The declaration is based on information provided by the manufacturer and has the legal force of a manufacturer's CE declaration of conformity.
Conformity assessments require an applicant established in the EAEU member states, either a natural person or a legal entity based in the EAEU states.
What quantity of goods can one certificate cover?
Different rules on validity and scope apply depending on the type of delivery.
Three types of delivery are distinguished:
- Serial production: The approval applies to all products manufactured regularly and in a consistent manner by the same manufacturer. In this case, the number of imported products is not limited. An EAC approval can be used for an unlimited number of units.
- Batch delivery: This option applies to a specified quantity of goods delivered under a supply contract by the same consignor to the same consignee. The certificate is valid only for this batch and ceases to be valid once delivery is complete.
- Single delivery: This refers to the one‑time import of a single product or a very small quantity. In this case, the importer has no intention of importing the product into the territory of the EAEU again. EAC approval is granted exclusively for this one delivery.
Which TR ZU are entered in a certificate?
Only one manufacturer may be entered in the EAC conformity document (EAC declaration, SGR certificate or EAC certificate). However, additional production sites, such as other factories of the same manufacturer or international production facilities, may be listed as branches in the annex to the conformity document.
All listed sites must also comply with the requirements of the Technical Regulations. In some cases, an additional production audit may be required.
How can a certificate be checked in the register?
EAC conformity documents within the Eurasian Economic Union can be validated through the respective national registers as well as centrally accessible, Union‑wide databases of the EAEU member states.
Access to these registers and further information on accredited testing facilities and certification bodies is provided by the official website of the Eurasian Economic Commission at https://www.eaeunion.org/?lang=en. The Services section provides structured links to the systems of the individual member countries of the Customs Union.
How are test samples delivered?
When products are imported into the territory of the Customs Union for testing purposes, written confirmation from the responsible testing laboratory is required. This document serves as proof to customs of the need for the import and must contain clear information on the products' purpose as test samples, the number of units and the product‑specific characteristics. Customs clearance of the samples for conformity testing can only take place with such a letter.
What does GTD / cargo customs declaration stand for?
The cargo customs declaration, known by the abbreviation GTD / Russian: ГТД (Грузовая Таможенная Декларация), is a mandatory document for the international movement of goods across the external borders of the Customs Union within the Eurasian Economic Union. It serves as customs documentation proving the lawful import or export of goods and is a prerequisite for customs release. Entry into the customs territory is prohibited without a registered and approved GTD.
After submission to the competent customs authority, the declaration is formally reviewed and confirmed by a customs officer. The GTD contains a wide range of trade‑specific information used to assess the goods during the customs process.
The cargo customs declaration typically contains the following information: name, addresses of the consignor and consignee, delivery terms, country of origin, value of goods, transaction currency, etc...